Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
|
What kind of networking is the aggregate rack responsible for? |
On the row |
|
|
What does a primary and private customer switch (FCS_ or BCS_) end with? |
A (primary) and B (secondary) |
|
|
Do servers provisioned to customers mount with cage nuts? |
No |
|
|
What does the network team configure during the final step of a COD request? |
Serial console access |
|
|
How many switches are installed on a Single Path rack? |
Three |
|
|
Are universal rails side specific? |
Yes |
|
|
What is the most common and secure way of mounting equipment to racks? |
Cage Nuts |
|
|
When is it important to put switches in pairs? |
Always |
|
|
What issues could resting unattached switches on top of switches attached to the rack cause? |
Damage to the rack, damage to the switch, sagging switch stacks |
|
|
What pairs do universal rails come in? |
Left and right |
|
|
What is the function of Perle, Cisco and Arista? |
Providing console access on the COD rack (Perle), used as back-end management switches (Cisco), switches on the aggregate rack (Arista) |
|
|
Are snap in rails side specific? |
No |
|
|
What happens if an aggregate rack goes offline,? |
The entire row will lose networking |
|
|
What does BMS stand for? |
Back-End Management Switch |
|
|
What switches on the aggregate rack provide connectivity to the public network? |
FASA, FCSA |
|
|
How many switches are installed on a single path aggregate rack? |
Two |
|
|
Should technicians be aware of which racks in each server room are VDC? |
Yes |
|
|
How many switches are installed on a dual path rack? |
Five |
|
|
Should the Site Manager be involved in any decision involving a COD device? |
Yes |
|
|
What should COD devices connect to to allow remote management by the customer? |
Console switch |
