Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
|
What are three types of EtherChannel's can you configure?
|
PAgP, LACP (IEEE 802.3ad),Static Persistence (On)
|
|
|
What two types of modes are available with LACP?
|
Active and Passive
|
|
|
What two types of modes are available with PAgP?
|
Desirable and Auto
|
|
|
True/False: An LACP trunk will form if both sides are set to Active?
|
True
|
|
|
True/False: An LACP trunk will form if one side is set to Active and the other is set to Passive?
|
True
|
|
|
True/False: An LACP trunk will form if both sides are set to Passive?
|
False
|
|
|
True/False: A PAgP trunk will form if both sides are set to Desirable?
|
True
|
|
|
True/False: A PAgP trunk will not form if one side is set to Desirable and the other is set to Auto?
|
False
|
|
|
True/False: A PAgP trunk will not form if both sides is set to Auto?
|
True
|
|
|
How do you configure a interface(or range of interfaces) to PAgP Desirable group 1?
|
(config-if)channel-group 1 mode desirable
|
|
|
How do you configure a interface(or range of interfaces) to LACP Passive group 1?
|
(config-if)channel-group 1 mode passive
|
|
|
What does the Flag R mean when viewing EtherChannel configuration using the command show etherchannel summary?
|
The EtherChannel is a Layer 3 EtherChannel.
|
|
|
What does the Flag S mean when viewing EtherChannel configuration using the command show etherchannel summary?
|
The EtherChannel is a Layer 2 EtherChannel.
|
|
|
What is the On mode for EtherChannel?
|
No EtherChannel trunking will be negotiated and automatically trunk.
|
|
|
Is EtherChannel Load-Balancing per-frame or per-bit?
|
Per-Frame
|
|
|
How do you configure EtherChannel Load-Balancing?
|
(config)port-channel load-balance {dst-mac | src-mac}
|
|
|
What Spanning Tree types can EtherChannel Guard be configured with?
|
PVST+, Rapid PVST+, and MSTP.
|
|
|
How do you configure Spanning Tree EtherChannel Guard?
|
(config)spanning-tree etherchannel guard misconfig
|
|
|
What kind of misconfiguration does Spanning Tree EtherChannel Guard look for?
|
If one switch is configured for an EtherChannel and the other side is not or if parameters do not match between two switches.
|
|
|
What interface state does a switch place EtherChannel interfaces in if EtherChannel Guard detects a misconfiguration?
|
err-disabled
|
