Iet 154 Exam 2

Front 1

TF. In mechanical designs, all features are created on a single plane.

Back 1

False

Front 2

TF. When you start a new part file, the fixed datum planes are provided by default.

Back 2

False

Front 3

TF. You can turn off the display of additional datum planes.

Back 3

True

Front 4

TF. In NX, you can extrude a sketch to perform only the UNITE operation.

Back 4

False

Front 5

Fixed datum planes are also termed as ________ datum planes.

Back 5

Principle

Front 6

The ________ boolean operation is used to create an extruded feature by removing material from an existing feature.

Back 6

Subtract

Front 7

The __________ option is used to create a revolved feature that terminates at a specified face.

Back 7

Until Selected

Front 8

The ________ option is used to create a revolved feature that terminates at a specified face.

Back 8

Until Extended

Front 9

The ________ option is used to create a plane at an angle to another plane passing through an edge, linear sketched segment, or axis.

Back 9

At Angle

Front 10

The ________ boolean operation is used to create an extruded feature by retaining the material common to the existing feature and the sketch.

Back 10

Intersect

Front 11

Which of the following tools allows you to create additional datum planes?
Plane
Datum Plane
Reference Plane
None

Back 11

Datum Plane

Front 12

Which of the following options in the INSERT menu allows you to project existing entities on the current sketching plane?
Project Curve
Project Edges
Divert
None

Back 12

Project Curve

Front 13

Which of the following operations allows you to join a new feature with an existing feature?
Join
Unite
Combine
None

Back 13

Unite

Front 14

Which of the following options allows you to extrude a sketch from the sketching plane to the next surface that intersects a feature in the specified direction?
Until Selected
Until Next
Value
None

Back 14

Until Next

Front 15

Which of the following projection output types project external elements as a single continuous spline?
Spline
Spline Segment
Single Spline
None

Back 15

Single Spline

Front 16

TF. If you create an associative datum plane, its name will be displayed as FIXED DATUM PLANE in the PART NAVIGATOR. *****

Back 16

(ask Lee)

Front 17

TF. While creating parallel planes, you can select only a planar face or a surface as reference object. *****

Back 17

(ask Lee)

Front 18

TF. After creating a coordinate system, you cannot modify its location. ******

Back 18

(ask Lee because book says you can create new coordinate systems)

Front 19

TF. The UNTIL SELECTED option is used to extrude a sketch up to a specified face, a datum plane, or a body.

Back 19

True

Front 20

TF. NX allows you to make the projected sketched entities associative with the original entities from which they were projected.

Back 20

True (ask Lee)

Front 21

TF. You can invoke the HOLE tool by choosing INSERT > DESIGN FEATURE > HOLE from the menu.

Back 21

True

Front 22

TF. In NX, you can create an aligned series of holes in multiple bodies.

Back 22

True

Front 23

TF. The placement face selected for holes cannot be a nonuniform surface.

Back 23

True

Front 24

TF. In NX, you can create a number of holes at a time using the HOLE tool.

Back 24

True

Front 25

TF. While creating counterbore holes, the counterbore diameter must be greater than the hole diameter.

Back 25

True

Front 26

Grooves can be created on both ______ and ______ faces.

Back 26

Cylindrical, Conical

Front 27

In NX, you can create _________ types of grooves.

Back 27

Three

Front 28

Slots are __________ features.

Back 28

Placed

Front 29

Slot features cannot be placed on a ________ face.

Back 29

Conical

Front 30

Slots are used as a ________ for sliding a member in practical models.

Back 30

Guide Way

Front 31

Which one of the following is not a hole type in NX?
Counterbore
Countersink
Simple
Sectional

Back 31

Sectional

Front 32

Which of the following tools is used to create a chamfer feature?
Chamfer
Edge Blend
Datum Plane
None

Back 32

Chamfer

Front 33

Which of the following tools is used to create a blend (fillet) feature?
Edge Chamfer
Edge Blend
Datum Plane
None

Back 33

Edge Blend

Front 34

Which of the following rollouts in the EDGE BLEND dialog box is used to create the variable radii blend feature?
Variable Radius Points
Variable Radius
Variable Radius Blend
None

Back 34

Variable Radius Points

Front 35

Which of the following rollout in the EDGE BLEND dialog box is used to create a corner blend feature?
Corner Blend
Blend Setback
Corner Setback
None

Back 35

Corner Setback

Front 36

TF. In T-Slots, the bottom width value must be greater than the top width value.

Back 36

True

Front 37

TF. The STOP SHORT OF CORNER rollout of the EDGE BLEND dialog box is used to restrict the distance of the blend in the selected edge.

Back 37

True

Front 38

TF. You can chamfer circular edges.

Back 38

False (ask Lee)

Front 39

TF. A counterbore hole has a uniform diameter throughout its length. *****

Back 39

(ask Lee)

Front 40

TF. Hole features can be placed on surfaces (sheet bodies). *****

Back 40

(ask Lee- what are sheet bodies?)

Front 41

TF. In NX, you can sweep an open section along a guide curve.

Back 41

True

Front 42

TF. You can use the LINEAR option from the PATTERN FEATURE dialog box to create a linear pattern of features.

Back 42

True

Front 43

TF. In NX, you can create only realistic threads.

Back 43

False

Front 44

TF. The TUBE tool is used to create a tube of rectangular cross-section.

Back 44

False

Front 45

The _______ tool is used to scoop out material from a model and make it hollow from inside.

Back 45

Shell

Front 46

The __________ features are created by sweeping one or more sections along one or more guide curves such that all sections are blended together.

Back 46

Swept

Front 47

The __________ radio button is selected from the THREAD dialog box to create realistic threads.

Back 47

Detailed

Front 48

The _________ pattern is created by placing the instances of the selected features along the circumference of an imaginary circle.

Back 48

Circular

Front 49

The _________ check box is to be selected to create a fill pattern.

Back 49

Pattern Face

Front 50

The _________ rollout in the SHELL dialog box is used to specify the faces of a model that should not be displayed in the resultant model.

Back 50

Face to Pierce

Front 51

Which check box in the THREAD dialog box is selected to create threads though the length of the selected face?
Full
Full Thread
Complete
None

Back 51

Full Thread

Front 52

Which of the following options is used to create a pattern of features with details such as rounds and chamfers?
Simple
Variational
Identical
None

Back 52

Variational

Front 53

Which of the following types of thread displays thread convention in the form of dashed lines?
Symbolic
Detailed
Convention
Improper

Back 53

Symbolic

Front 54

In the SHELL dialog box, which of the following rollouts is used to select a face of a model to specify a different wall thickness?
Alternate Thickness
Thickness
Settings
Offset Face

Back 54

Alternate Thickness

Front 55

Which of the following tools does not need a section to create a frame?
Sweep Along Guide
Swept
Tube
None

Back 55

Tube (ask Lee)

Front 56

Which of the following threads allows the screw to get tightened when rotated in the clockwise direction?
Right Hand
Left Hand
Downward
Upward

Back 56

Right Hand

Front 57

TF. The SHELL dialog box allows you to hollow models by using three methods.

Back 57

True

Front 58

TF. The THREAD dialog box does not allow you to select the start and the end of threads.

Back 58

False (ask Lee- book says you can specify length)

Front 59

The __________ method is used to pattern features with details such as rounds and chamfers.

Back 59

Variational

Front 60

TF. If you enter 0 in the INNER DIAMETER edit box, the resulting tube feature will be solid filled.

Back 60

True

Front 61

TF. The REORDERING FEATURES options is used to change the order in which features are created.

Back 61

True

Front 62

TF. Boss can be placed on a nonplanar surface.

Back 62

False

Front 63

TF. In NX, you can create three types of pockets.

Back 63

True

Front 64

TF. The pad feature is defined as the process of adding material to a model.

Back 64

True

Front 65

TF. In the TANGENT TO FACES draft type, there is no need to select a stationary plane.

Back 65

True

Front 66

General pockets can be created on both ___________ and __________ faces.

Back 66

Planar, Nonplanar

Front 67

In NX, you can create _________ types of drafts.

Back 67

Four

Front 68

In the DRAFT dialog box, the ____________ check box allows you to select whether to taper only the specified instance or all instances in array features.

Back 68

Draft All Instances

Front 69

The TANGENT TO FACES type is used to create a draft, which is ________ to the selected faces.

Back 69

Tangent

Front 70

The length of a rectangular pad is ________ to a horizontal reference.

Back 70

Parallel

Front 71

Which of the following cross-section does have the boss feature?
Circular
Rectangle
Square
None

Back 71

Circular

Front 72

Which of the following tools is used to create the cutout feature?
Pad
Pocket
Boss
None

Back 72

Pocket

Front 73

Which of the following pocket types needs a sketch?
Cylindrical Pocket
General Pocket
Rectangular Pocket
None

Back 73

General Pocket (ask Lee)

Front 74

Which draft type is used to create a draft on nonuniform edges?
From Plane
From Edges
Tangent to Faces
None

Back 74

From Edges

Front 75

Which of the following is the radius between the placement face and the side faces of the pocket?
Placement Radius
Corner Radius
Floor Radius
None

Back 75

Placement Radius

Front 76

Which of the following tools is used to create the cylindrical extrusion feature?
Boss
Pad
Pocket
None

Back 76

Pad (ask Lee)

Front 77

TF. The INFERRED VECTOR drop down list in the DRAFT dialog box is used to specify the draw direction of a taper. *****

Back 77

(ask Lee)

Front 78

TF. A datum plane can be selected as the placement face for the boss feature.

Back 78

True

Front 79

TF. A boss is a feature that has a uniform diameter throughout its length.

Back 79

True (ask Lee- book says to specify its diameter)

Front 80

TF. A draft feature can be placed on the surface body. *****

Back 80

(ask Lee)

Front 81

TF. The modeling environment of NX is a parametric and feature-based environment.

Back 81

True

Front 82

TF. You can modify an existing design quickly using the SYNCHRONOUS MODELING tools.

Back 82

True

Front 83

TF. The generative drafting technique is used to automatically generate the drawing views of the parts and assemblies.

Back 83

True