Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
|
Corrective maintenance and repairs to ships are which three general categories? A. Equivalent repairs, materials, damaged parts B. Repairs, alterations equivalent to repairs, alterations C. Alterations, repairs, damaged parts D. Damaged parts, minor modifications, alterations |
Repairs, alterations equivalent to repairs, alterations |
|
|
What are the two categories of ship alterations (SHIPALTs)? A. Military, technical B. Repair, alteration C. New weapons, installation D. Fleet, military |
Military, technical |
|
|
Which type of availability is used for repairs while the ship is underway? A. Regular overhaul B. Emergency IMA C. Concurrent D. Voyage |
Voyage |
|
|
What is the maintenance request action form? A. OPNAV 4790/2K B. OPNAV 47901/22A C. OPNAV 4790/65 D. OPNAV 4790/182 |
OPNAV 4790/2K |
|
|
Which repair division consists of the machine shop, outside machine shop, and foundry shop? A. Hull repair division (R-1) B. Electrical repair division (R-3) C. Electronics repair division (R-4) D. Machinery repair division (R-2) |
Machinery repair division (R-2) |
|
|
What manual establishes a single unified source of maintenance requirements across all platforms? A. Navy Ships' Technical Manual B. Technical Manual Management Program C. Joint Fleet Maintenance Manual D. Specification for Ship Repair and Alteration Manual |
Joint Fleet Maintenance Manual |
|
|
Which work package coordinates in a single document materials required, initial conditions, tests, and inspections? A. Controlled work package B. Data analysis package C. Formal work package D. Quality of evidence package |
Formal work package |
|
|
What is the formula to compute the volume of a cylinder? A. πR²H B. Volume × weight C. 2R² + H(2πR) D. Length × width × height |
πR²H |
|
|
What automated supply system is used by supply personnel onboard ships? A. DPSR B. R-Supply C. Nameplates D. NSTMs |
R-Supply |
|
|
Which structural hull member of the ship is considered to be the backbone? A. Keel B. Longitudinals C. Framing D. Plating |
Keel |
