Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
16 Cards in this Set
- Front
- Back
Abrasive blasting materials.
|
Sand
Aluminum oxide Chilled iron grit Steel balls Cut wire Granular aluminum odixe Corn cob Nutshell |
|
Two types of abrasive blasting.
|
Air blasting
Wet blasting |
|
Battery (Lead-Acid) Manufacture hazardous materials.
|
Sulfuric Acid
Arsenic (contaminant) Arsine (remelt operations) H2 gas |
|
Cement manufacture stages.
Clinker manufacture |
Limestone and clay are blended and ground then baked in a kiln.
|
|
Cement manufacture stages.
Clinker grinding. |
The clinker is ground in a mill, screened and then stored.
|
|
Cement manufacture composition.
|
Calcium oxide.
Silicon dioxide. Aluminum trioxide |
|
Degreasing types:
|
Cold
Soak cleaning Vapor phase degreasing |
|
Vapor phase degreasing
|
Solvent is heated to boiling. Solvent vapors condense on part and drip off.
|
|
Chemicals used in dry cleaning:
|
Stoddard solvent
Perchloroethylene Fluorocarbon 113 |
|
Anodizing.
|
Work piece is the anode. Pb is the cathode. Process conducted in a chromic acid bath.
|
|
Foundry steps
|
Making pattern - Making the casting.
Melting and refining metal - heat in cupola, pour into mold, shakeout, and fettle to remove unwanted metal. |
|
Petroleum refinery chemicals:
|
Benzene and H2S.
|
|
Glass industry chemical hazards:
|
Silica
Soda Lime IR HF for etching. |
|
Tannery chemical hazards:
|
Dry-salting.
Soaking pits: Caustic soda. Beam house: Lime Pickling: H2SO4 or HCL Other acids, NH3, caustics. Contact dermatitis from the hides. |
|
Three common forms of welding.
|
Electric arc
Flame Electric resistance |
|
Arc Welding
|
Common dangers are UV and IR.
Fumes: Iron oxide, chromium, nickel, lead, cadmium, beryllium. |