Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
34 Cards in this Set
- Front
- Back
|
G0 |
Rapid Motion |
|
|
G1 |
Linear interpolation motion |
|
|
G2 |
CW Circular Interpolation Motion |
|
|
G3 |
CCW Circular Interpolation Motion |
|
|
G17 |
XY Coordinate Plane Selection |
|
|
G20 |
Inch Coordinate Positioning Selection |
|
|
G21 |
Metric Coordinate System Selection |
|
|
G28 |
Return to Machine Zero Through Reference Point |
|
|
G40 |
Cutter Comp Cancel |
|
|
G41 |
Cutter Comp Left |
|
|
G42 |
Cutter Comp Right |
|
|
G43 |
Tool Length Offset |
|
|
G49 |
Cancel G43 |
|
|
G54-G59 |
Set Work Coordinate System |
|
|
G80 |
Cancels Canned Cycle |
|
|
G81 |
Simple Drilling Cycle |
|
|
G82 |
Drilling Cycle with Dwell |
|
|
G83 |
Peck Drilling Cycle w/ full retraction |
|
|
G84 |
Tapping Cycle w/ Righthand Thread |
|
|
G90 |
Absolute Position Command |
|
|
G91 |
Incremental Position Command |
|
|
G98 |
Return to Initial Plane in a Canned Cycle |
|
|
G99 |
Return to Retraction (R) Plane |
|
|
M0 |
Non-Optional Stop |
|
|
M01 |
Optional Stop |
|
|
M02 |
End of Program |
|
|
M03 |
Spindle On (Clockwise Rotation) |
|
|
M05 |
Spindle Stop |
|
|
M06 |
Automatic Tool Change (ATC) |
|
|
M08 |
Coolant On |
|
|
M09 |
Coolant Off |
|
|
M30 |
End of Program and Return to Program Start |
|
|
Q__ P___ R___ |
Q= Depth Of Peck for a Canned Cycle P= Dwell Time in Canned Cycle R= Retraction Plane Height |
|
|
G73 |
Peck drilling cycle for milling – high-speed (NO full retraction from pecks)
|
