Form C

Front 1

HCS RSDS CLTTT Front-Header Board, Trailer Clearance Lights, Safety Reflectors Side- Rivet, No side doors, DOT tape, Trailer side makers, Under- cross members(Rivets&Bolts), landing gear(Feet, Legs, High & Low, Crank handles), Tandem Hoses, Tandem Frame (cross members), Tandem Release (Locking Pins)

Back 1

H- all parts PMaS nCBB no holes GCnD C- Amber operational not missing PMaS-ly sealed no moisture inside CnCB they Represent the Vehicle Maximum Height is 13’6” S- Amber PMaS-ly attached CnCB GCnD R- On Frame Rails all must be PaT nCBB on side panels cannot have three missing rivets in a row nCBB S- No Damage D- PMaS-ly attached clean GCnD must cover 50% of the length of the side of the trailer S- Amber operational not missing PMaS-ly sealed no moisture inside CnCB they have Three functions L/R turn signals 4 way flashers and parking C- PMaS none missing nCBB all Rivets & Bolts on the trailer frame rails must be PaT L- All part must be PMaS nCBB the feet notMiCDL and Clear of Debris and Obstructions the legs must be properly greased fully raised working in both high & low gears the crank handle must be PMaS in its Holder T- PMaS-ly connected not cut damaged or leaking air they must be 18 inches off the ground or even with the dead axle springs and clamps PMaS notMiCDL T- nCBB no drill holes or repair weld cross members GCnD no Broken welds T-the release arm PMaS nCBB on the locked position with locking pins in place nCBB

Front 2

TR(L&A) BS Drive Tires ( rear ,dual tires) 1-9 Rims, Lug nuts (PaT) Axle Seal ( internal axle seals, axle bolts & nuts) brake components 1-4 air hose, brake chamber & clamps, slack adjuster & push rod, brake shoes & brake drum Drive suspension 1-9 leaf springs, spring mounts, control arms, mounting brackets, hydraulic shock absorbers, bellows , bellow mounts, torsion bar, u-bolts

Back 2

T-1) same size same type and evenly worn 2) tread depth minimum two thirty seconds of an inch 3) can not be re capped 4) no tread separation 5) good condition no abrasion bulges or cuts 6) inflation from 100 to 110 psi or the manufacture specifications 7) two valves stems PMaS to each Rim nCBB both should be accessible and have a metal cap PaT 8) not leaking air 9) should have 5 inches between tire treads and 3 inches between rims nothing stuck between the dual tires R- nCBB no dents or repair welds L- all 10 must be PaT no shiny bolts threads if it is a steel rim a rust trail would indicate lug nuts may be loose if it’s an aluminum rim a white powder residue would indicate lug nuts may be loose A- both internal axle seals not leaking all 8 axle bolts & nuts PaT must be filled to proper level with gear lubrication 90 weight oil B- 1)Air Hoses PMaS-ly connected nut cut damaged or leaking air 2) brake chamber & clamps PMaS nCBB GCnD not leaking air 3) Slack adjuster & Push rod PMaS nCBB no more than 1 inch of free play when brakes are released 4) brake shoes & brake drum PMaS nCBB no repair welds no evidence of grease oil debris the brake pads must have at least 1/4 inch of thickness remaining the brake drums must not be excessively worn S- 1) leaf springs PMaS no more than 25% can be MiCDL 2) front & rear spring mounts PMaS nCBB 3) control arms PMaS nCBB 4) mounting brackets PMaS nCBB 5) hydraulic shock absorbers PMaS nCBB not leaking hydraulic fluid 6) bellows SPnDR nHnRT not leaking air 7) bellow mounts PMaS nCBB 8) torsion bar PMaS nCBB 9) two u-boots & Anchor plates PMaS nCBB all nuts PaT

Front 3

Trailer Rear SR Splash Guard (Mud Flaps), Rear side lights ( ABS warning lights, side marker tail lights), Rear Lights ( License Plate Light, outside tail lights, inside tail lights, clearance lights, identification lights) Safely Reflectors ( DOT Reflective tape), Doors ( Overhead door, cables, swing doors, latch handle)

Back 3

S- Mud Flaps PMaS SPnDR nHnRT not touching tires no more than 6 inches off the ground mounting brackets PMaS nCBB (R) Rear (side) Lights - ABS warning Light on the side Amber operational not missing PMaS-ly sealed no moisture inside CnCB it turned on then turned off during the safe start indicating that it is working properly (Side Marker ) Tail lights Red operational not missing PMaS-ly Sealed no moisture inside CnCB has one function parking Rear Lights / One License Plate Light clear operational not missing PMaS-ly sealed no moisture inside CnCB Four lights below the trailer doors all are red operational not missing PMaS-ly sealed no moisture inside CnCB the 2 outside tail lights have 3 functions L/R turn signal, 4 way flashers and parking the 2 inside tail lights have 2 functions braking and parking 5 lights above the trailer doors all are red operational not missing PMaS-ly sealed no moisture inside CnCB The 2 outside lights are Clearance lights they represent the vehicle’s maximum height is 13’6” the 3 lights in the middle are the identification lights they represent the vehicle minimum width is 8 feet Safety Reflectors/ on the DOT bumper & at the bottom of the Trailer Doors 100% DOT reflective tape PMaS-ly Attached Clean GCnD at the top of the trailer door 2 white corners PMaS-ly attached clean GCnD Doors/ 1A) Overhead Door must have both cable present not frayed or worn with the proper tension panels notMiCDL 1B) Swing Door PMaS-ly Hinged all hinges not MiCDL 2) must open and close properly 3) Latch Handle must lock and unlock properly