Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
purpose of check scaling |
-to maintain scaling standards and uniform practices in BC |
|
the check scaler must (2) |
-remeasure for comparison -monitor scale site and procedures |
|
the scaler must (3) |
-indicate when scaled -retain sample -be available to discuss and review |
|
second scale can be check by? (1) because? (1) |
-scaler if original scale replaced |
|
cost is borne by the scaler if the original scale varies by what % |
-3% |
|
base units (measurements taken) include (6) |
-cm -m -kg -rads -tonne -whole # |
|
derived units (calculated values) include (4) |
-m^3 -dm^3 -stacked m^3 -m^3/tonne to get to weight scale ratio |
|
error types include (7) |
-mistakes -natural errors -instrumentation -personal -systematic -compensation -lost data |
|
what is mark site designation and what does it represent |
-the administrative process of determining place timber can be taken to be scaled -represents authorization for transportation of timber to scale site |
|
who applies for mark site designation |
-licensees -private land owners -above delegates |