Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
|
What are the 2 OPNAV instructions for Operational Safety?
|
OPNAVINST 5100.23G, Navy Occupational Safety and Health (NAVOSH) Program Manual<BR>OPNAVINST 5100.19E, Navy Occupational Safety and Health (NAVOSH) Program Manual for Force Afloat, Vol. I
|
|
|
What is HAZMAT?
|
flashpoint below 200oF (93.3oC) closed cup, or is subject to spontaneous heating or is subject to polymerization with release of large amounts of energy when handled, stored, and shipped without adequate control.
threshold limit value below 1000 ppm for gases and vapors, below 500 mg/m3 for fumes, and below 30 mppcf for dusts. single oral dose which will cause 50 percent fatalities to test animals when administered in doses of less than 500 mg per kilogram of test animal weight. strong oxidizing or reducing agent. causes first degree burns to skin in short time exposure or is systematically toxic by skin contact. in the course of normal operations, may produce dusts, gases, fumes, vapors, mists, or smokes with one or more of the above characteristics. produces sensitizing or irritating effects. Radioactive. has special characteristics which in the opinion of the manufacturer could cause harm to personnel if used or stored improperly. |
|
|
What is HAZWASTE?
|
Any discarded or abandoned hazardous substance as defined in 40 CFR 261 or applicable state regulations where the state has been granted enforcement authority by EPA. It may include any discarded liquid, semisolid, solid, or containerized gaseous material
|
|
|
What is MSDS?
|
Material Safety Data Sheet. OSHA Form 174 or an equivalent form containing the identical data elements, must be used by manufacturers of chemical products to communicate to users the chemical, physical, and hazardous properties of their product to comply with the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
|
|
|
What is AUL?
|
Authorized Use List. all HM allowed for use in the activity.
AUL must include the stock number and item name for stock numbered items purchased via the stock system, or the product name and manufacturer name as they appear on the product label/material safety data sheet (MSDS) for items not purchased via the stock system. In addition, the AUL must identify the processes(es) for which each HM is allowed to be used. |
|
|
Explain the general procedures to be followed when a HAZMAT spill is discovered
|
Discovery and Notification.
Initiation of Action. Evaluation. Containment and Damage Control. Dispersion of Gases/Vapors. Cleanup and Decontamination. Disposal of Contaminated Materials. Certification for Re-entry. Follow-up Reports |
|
|
State the PPE required when handling HAZMAT/HAZWASTE
|
The best means of protecting personnel from hazard exposure in the workplace is to eliminate the hazard. When this is not possible, engineering controls shall be the method of choice to eliminate or minimize hazard exposure in the workplace. When neither of these methods can be employed, activities shall implement a personal protective equipment (PPE) program to reduce or eliminate personnel exposure to hazards
|
|
|
PPE approval approval can be met through the use of what?
|
Federal specifications
American National Standards Institute (ANSI) specifications Recognized approval authority, such as Underwriter's Laboratories (UL), Factory Mutual (FM), or American Society of Testing and Materials (ASTM). |
