• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/18

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

18 Cards in this Set

  • Front
  • Back
t/f there is always a risk of perforating the PDL or pulp chamber when placing pin channels in at the level of the cej
T
Which pin channel perforation is easier to manage: into the pulp or into the CEJ
pulp. CEJ is more serious.
what is The minimal thickness of dentin surrounding pins placed in dentin
0.5mm
what is the safe location for placing channels for self threading pins in the posterior teeth
proximo facial and proximo lingual line angles.
two significant factors to consider when placing anterior PVCs, as opposed to posterior PVCs
Tooth Morphology, Occlusion in lateral and protrusive,
Why have anterior PVCs decreased in popularity since the sixties and seventies? 2 reasons
Single tooth implants, Development of resin bonded fixed prostheses in the 70s and 80s. Concern with metal free restorations and high failure rate are not true.
properties for all cemented pins: length and width
at least 3 mm long and 0.05mm less in diameter than the pin channel
pinledge prep: what is the minimum pin depth?
2mm
4 ways that undercuts can arise when preparing two teeth as abutments for a 3 unit bridge
Between abutment teeth, between abutment adjacent tooth, opposite walls of same abutment, due to incorrect flaring of grooves and boxes
what should the proximal grooves be parallel to in an anterior PVC
the facial incisal two thirds.
Does the dowel portion of the cast dowel core for a single rooted tooth increase the fracture resistanc of the root
NO
What makes up the new philosophy on post core strngthening of the tooth
post holds core in place, core replaces lost coronal structure, crown holds it all together
which offers more retention, smooth (passive) or threaded (active)
active, but active has increased stress during deliver andfunction
Question
When do you prepare the root canal?
1. Before the coronal tooth preparation or
2. After the coronal tooth preparation
Answer
If there is direct access to the canal and the
endodontist provides the working length and
a reference, prepare canal prior to coronal
tooth prep, if NOT, first prep tooth, second
take an PA radiograph and then determine
canal preparation length before canal prep.
4 Indications for Indirect Custom Cast P & C
• Multiple P & C ’ s
• P & C ’ s with same POI
• Multiple Segment P & C
• Poor access for direct technique
Two-Step P & C/ Restoration
Advantages
• Better Marginal Fit - Expansion Control
• Easy Restoration Replacement w/o Post Removal
• Independent Post/Crown POI - FPD Abutments
rationale for includeing a cement vent in all cemented dowels
allow cement to escape and reduce hydraulic pressure during cementation
indications for nonrigid connectors
bridge abusment have different poi, design simplification of exgtensive bridgework, ease of cementation of components of extensive bridgework, FPD with a pier abutment