Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
malleable and cast iron |
fittings for steels and wrought iron are made of what |
|
True |
the fittings for plastic copper and brass pipe are made of the same material as the pipe. True or false |
|
Elbows usually at 45 and 90 degrees |
are angular fittings used to change the direction of a supply pipe |
|
Tees |
are used in a supply system when a line must branch off at a straight run. |
|
Reducing Tees |
allows different pipe sizes to be joined together in a supply system |
|
Sanitary T and Y |
are tee-like fittings used in sanitary drainage systems that make a more gradual turn to prevent blockage |
|
Sanitary T and Y |
are tee-like fittings used in sanitary drainage systems that make a more gradual turn to prevent blockage |
|
Sanitary Y |
it can accept two or three brances before combining flow into one pipe |
|
Adapters |
used in a supply system where threaded pipe is being connected to copper or thermoplastic |
|
Adapters |
used in a supply system where threaded pipe is being connected to copper or thermoplastic |
|
1 |
how many threaded end does an adaptor have to accomodate a threaded pipe |
|
soldering, brazing, and welding |
are ways of joining metal surfaces |
|
welding |
joining two or more pieces of metal by the applications of hear |