Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
Electrical Supervision |
Detects faults that would prevent normal operation of FA system |
|
FasTest |
One person test mode on devices and circuits (maintenance) |
|
Reset |
Panel function that returns alarm system back to normal. Everything has to be in normal state. |
|
Polling |
Interrogating devices to find out their status |
|
Addressable System |
Digital method that can identify a specific IDC |
|
Multiplex |
Transmit 2 or more messages from remote devices over a single channel |
|
Ancillary device |
Device activated by FA system but not apart of it. Eg. Door holders, smoke control fans. |
|
Authority Having Jurisdiction (AHJ) |
Person responsible for fire codes Eg. Fire Marshall |
|
Transponder |
Component that talks to devices about status and brings it back to panel |
|
Baud Rate |
Measure of speed of transmission of digital signal |
|
Central Monitoring Station |
Agency/location that communicates with remote buildings by direct wiring or telephone. Calls emergency personnel to respond to alarm |
|
City Tie Module (CTM) |
Sends Fire department |
|
Coded signals |
Types of alarms are identifies using different signal rate sequences |
|
Disable |
Command that prevents device from changing state |
|
Staged Evacuation System |
High rise alarm signal around dangerzone
And
Alert signal everywhere else
|
|
Vibrating Bell symbol |
|
|
Chime symbol |
|
|
Horn & Siren Symbol |
|
|
Strobe Symbol |
|
|
Speaker Symbol |
|