Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
87 Cards in this Set
- Front
- Back
|
What does DFIR stand for?
|
Deployable Flight Incident Recorder
|
|
|
What doors would you spray halon in to extinguish an AMAD fire?
|
Door 54 L/R
|
|
|
How long must you wait for the APU to spool up before signaling to the pilot that he/she has an APU fire?
|
9-11 seconds
|
|
|
What does IETM stand for?
|
Interactive Electronic Technical Manual
|
|
|
Where do you find towing info for F/A-18 E/F in IETM?
|
Line Maintenance Procedures to 1)Towing 2)Towing Preperations 3) Towing Precautions 4) Spotting
|
|
|
What is a 14-Day Inspection? What kind of inspection is it?
|
1)Wash Job 2) Special Inspection
|
|
|
What is a 4 down?
|
1)IFR probe- light and greased
2)Launch bar 3)Speed brakes 4)Tailhook |
|
|
What are your tire pressures ashore? afloat?
|
Never memorize anything in your daily deck MRCs.
1) 150N 290M 2) 375N 350M |
|
|
Why is the NLG tire higher in pressure when onboard ship?
|
The arresting fire tends to make the nose hit harder than if on shore.
|
|
|
The wing fold switch should be in which position Why?
|
The switch should match what the position the wings . If not, flight surfaces can damage aircraft or injure someone.
|
|
|
Where do you find the cut limits for the tires?
|
Sidewall of the tire
|
|
|
Where do you find procedures and equipment for performing a 14-Day inspection?
|
01-1A-509-1/ 2
|
|
|
What is a 14-Day Inspection? What kind of inspection is it?
|
1)Wash Job 2) Special Inspection
|
|
|
What is the scheduling for a wash job?
|
14 days plus or minus 3 days. That is why you get a jet twice in one week sometimes. Up to maintenance.
|
|
|
What is a 4 down?
|
1)IFR probe- light and greased
2)Launch bar 3)Speed brakes 4)Tailhook |
|
|
What is a 4 up?
|
1)IFR probe doors close flush
2)Launch bar up 3)Speed brakes down 4)Tailhook up and locks |
|
|
How do you open the doors of engines and AMADs when you have an external fire?
|
Open doors upwind and door towards you.
|
|
|
When you spray Halon/ CO2 into doors for extenal fire, how do you spray?
|
Stick horn halfway in if possible and spray agent upwind so not to suffocate yourself.
|
|
|
What are your tire pressures ashore? afloat?
|
Never memorize anything in your daily deck MRCs.
1) 150N 290M 2) 375N 350M |
|
|
Why is the NLG tire higher in pressure when onboard ship?
|
The arresting fire tends to make the nose hit harder than if on shore.
|
|
|
Is it possible to do a Daily or Turnaround in less than the alotted time?
|
Yes, with more than one PC performing the inspection.
|
|
|
How many D-Pressure (delta-p) indicators are on an F/A-18 E/F?
|
17
|
|
|
What do you use to insure your PON-6 is ready for use?
|
Use your pre-op checklist and sign your pre-op card(4790/52)
|
|
|
How often are fuel samples taken?
|
24 hours prior to the first flight of the day.
|
|
|
What do you do when you find that a tool is missing?
|
1)Do a quick search in the immediate area 2)Notify Supervisor or Maintenance Control 3) If tool is not found, manintenance will notify Quality Assurance whom will in turn assign an investigator.
|
|
|
What is the first step to corrosion control on an aircraft?
|
Cleaning the aircraft.
|
|
|
What does the acronym PPE stand for?
|
Personal Protective Equipment
|
|
|
When a seat safe/arm handle is left armed what can you do?
|
1) Utilize aircrew if still there 2)Call the FDC to get someone out there 3) Close canopy and pull its breakers and run and get an AME ASAP. Do not safe the seat yourself, ever!
|
|
|
How do you tell a FOD damaged engine blade(s) from a repaired one?
|
Damaged blade will be jagged or twisted. A repaired blade will be smooth, sanded and marked.
|
|
|
What is the MSDS? What kind of info does it contain?
|
Material Safety Data Sheets. It gives detailed info about hazmat.
|
|
|
What is an IRAC? Why is it important?
|
Interim Rapid Action Change, to subject a change in a publication.
|
|
|
How many ground points on a jet?
|
8
|
|
|
How many chains do you need to use on an elevator move?
|
9 chains
|
|
|
What is the purpose of the onboard oxygen generating system(OBOGS)?
|
Creates breathable air pilot
|
|
|
If you are the brake rider and the tow bar seperates from either the tractor or the jet, what do you do?
|
Apply brakes with firm and consitent pressure
|
|
|
What three ways are there to open a cockpit?
|
1)Manually
2)Electrically 3)Forcibly |
|
|
How can you tell if your AMAD or engine needs servicing?
|
You will likely see the fluid sight glass as a silver color meaning it is empty rather than a light to dark brown.
|
|
|
What items do you check before you even think about sitting in the cockpit?
|
Your drogue switch(dolls eye) for being black not white./ Safe-Arm Handle is up and reads safe/ pins are installed in your ejection handle on seat and your canopy jettison pin is installed fully into lever and mounting plate.
|
|
|
What is the settling/ wait time for taking fuel samples
|
2 hours
|
|
|
How long do you have to service the AMADs after flight?
|
30 minutes maximum
|
|
|
How long can you wait after flight to service the engines?
|
1 hour maximum
|
|
|
How long is a turnaround good?
|
24 hours from the end of the last flight until the next
|
|
|
How long is a Daily good?
|
72 hours from the end of the last flight until the next
|
|
|
When folding wings what should be done prior?
|
Take out wing pins, push in wingfold breakers, and make sure wing fold switch is in the correct position.
|
|
|
What is your main reason and purpose in being a Plane Captain?
|
SAFETY!!!!
|
|
|
When using your static discharge kit (happy hand) what should you do first?
|
Ground aircraft with grounding cable.
|
|
|
Is ordnance loading/arming or un-loading/ de-arming allowed while fueling?
|
No
|
|
|
What is the purpose of the nosewheel digital data display?
|
To display MSP maintenance codes. Does not store them.
|
|
|
What division is the line?
|
310 division
|
|
|
What division are the shooters?
|
320 division
|
|
|
What form number is the Pre-flight/Daily/Turnaround/Postflight maintenance card?
|
4790/38
|
|
|
What is block 12 on the turnaround?
|
Maintenance Control Representative
|
|
|
How many turnarounds are kept in the Aircraft Discrpancy Book?
|
10 turnaround cards
|
|
|
How do we display the date on the Daily/ Turnaround cards?
|
As the Julian date (four numerical digits)
|
|
|
What does F.O.D. stand for?
|
Foreign Object Debris/ Damage
|
|
|
Do you need a license for the NC-10 mobile power plant cart?
|
Yes.
|
|
|
How can you tell if C.A.D.s are installed on the bomb racks(BRU-32)?
|
Breech cap indicators(nipples) are sticking out
|
|
|
What manual give you genral info about the F/A-18 E/F?
|
A1-f18EA-GAI-000
|
|
|
How many volts can an aircraft build up when in flight or high winds?
|
Up to 100,000 volts charge
|
|
|
What is the grounding cable part number?
|
MS3493-5
|
|
|
The seven STRAIN GAGE SELECT switches are accessed by doing what?
|
Removing the six captive set screws on top of the NWDDI
|
|
|
If the RDY DISCHARGE lights are on the what do you do?
|
Get the FDC to call an AME out to the jet or close the canopy, stow the ladder and make it diggicult to get up to the cockpit and run and get an AME.
|
|
|
What do you do if the FCS HOT lights come on?
|
Stop everything. Apply ground cooling and resume what ever work that is needed.
|
|
|
Do you pre-op and operationally test your float coat before use?
|
Yes you always do just in case. The boat chucks call it an R-1 check.
|
|
|
The BRU-32 parent bomb rack is safe when what are done?
|
C.A.D.s are out and ground safe handle is in the locked position.
|
|
|
How many stations are on the F/A-18 E/F?
|
There are 11 stations. Looking aft to fwd and looking left to right is how you number them.
|
|
|
How long do you wait after two tries of trying to wing fold and why?
|
You will wait 12-15 minutes so not to burn out the wingfold motor and transmission.
|
|
|
How do you ground your aircraft when cold re-fueling with the fuel truck.
|
You will ground you jet to ground, furl truck to ground, and truck to jet.
|
|
|
How long do you normally wait for the pre-check to work?
|
30-45 seconds maximum
|
|
|
How many ways are there to defuel the aircraft?
|
2 ways-1)de-fuel at skids or by truck and 2)de-fuel by using the NAN (nitrogen) cart.
|
|
|
How much pressure is used to de-fuel using the NAN cart?
|
100 psi
|
|
|
JP-5 is what NATO code? MIL number?
|
F-44 NATO code and MIL-T-5624
|
|
|
What is the oil number we use?
|
MIL-PRF-23699
|
|
|
What is the hydraulic oil number we use?
|
MIL-PRF-83282
|
|
|
In the 01-1A-17 Hydraulic Manual, what WP number is the patch test procedure?
|
WP 00 017
|
|
|
When servicing the hydraulic system what must be done?
|
Have hydraulic pressure and make sure that the flaps are up (flaps closed) to service.
|
|
|
What is the NAMP and what is the instruction number?
|
1)Naval Aviation Maintenance Program 2) COMNAVAIRFOR 4790.2
|
|
|
What publication is the corrosion control manual?
|
01-1A-509-1 through 5 depending on what branch of serviceyou are in.
|
|
|
What does CALA mean in regards to move director or ordnance?
|
Combat Aircraft Loading Area
|
|
|
What is the speed of any vehicle in close vicinity to aircraft?
|
5 mph
|
|
|
What is the maximum speed on taxiways?
|
25 mph
|
|
|
What is the maximum speed allowed on runways?
|
55 mph
|
|
|
What is the maximum speed on ramps?
|
15 mph
|
|
|
If you lose communication with the Air Traffic Tower what do you do?
|
Turn the tractor or vehicle towards the tower and flash your lights and wait for them to respond by lights or an escort vehicle.
|
|
|
Prior to pulling pins do you check your aircraft?
|
60 minutes/ 1hour prior to launch.
|
|
|
What doors do you normally leave open prior to the launch?
|
Gun loading door, W.I.P. panel door, and pin bag door.
|
|
|
When would you dive your ducts?
|
Before and after flight to check for F.O.D. or general wear and/or damage.
|
