• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/38

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

38 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)
Of the following information, 3-6.
which could be provided by modern
IFF systems?
All of the above
What are the three basic steps of
the IFF identification process?
Challenge, reply, and
recognition
The spacing between IFF
interrogation pulse pairs is
determined by which of the
following factors?
Mode of IFF operation
The Mark XII IFF aystem is capable
of how many modes of operation?
5
1, 2, 3/A, 4, C
Which IFF unit provides the
control signals that determine the
MK XII mode of operation?
Video decoder
Which of the following modes of
IFF operation is NOT a selective
identification feature (SIF) mode?
C
The transponder of a pilotless
aircraft, responding to a SIF mode
interrogation, would send which of
the following replies?
X–pulse
Which of the following codes could
be selected as an IFF transponder
reply code for mode 1 operation?
4300
A major failure in your radio room
has knocked your communications
off the air. Which of the
following codes should you set in
the IFF transponder for mode 3/A
replies?
7600
Which of the following IFF mode
3/A reply codes will trigger an
alarm at an FAA tower?
All of the above
Which of the following IFF mode
3/A reply codes may your ship use
in U.S. national air space?
5011
Which of the following IFF mode C
reply codes will your ship use?
0000
A commercial airliner using TCAS
could mistake your ship’s IFF mode
C reply for which of the following
structures?
An airport tower
Under which of the following
circumstances may you operate IFF
in mode C when your ship is in or
near port?
When testing with the antenna
disconnected
The MK XII IFF system requires
triggers to initiate interro–
gations. Where do they come from?
The pulse generator of the IFF
interrogator
You would find direct altitude
readouts for IFF mode C replies on
which of the following displays?
Intratarget data indicator
All the indicators on your ship
that are interfaced with IFF have
ring-around. Which of the
following places will the problem
most likely be found?
IFF transponder section
The antenna pedestal assembly is
being rotated at 21 rpm. To what
mode of operation is your IFF
manual pedestal set?
Slave
Which of the following modes of
IFF operation does/do NOT require
that reply codes be set by
thumbwheel switches?
Both 2 and 3 above
You would need written permission
from the Skipper to work on which
of the following units without
formal training?
TS-1843A/APX
Which of the following agencies
is/are involved in agreements made
under the AIMS program?
All of the above
Which type of DAIR system is used
at major shore installations?
Type 10
Which type of DAIR is used at
expeditory airfields?
Type 5
You are at a shore installation
and your DAIR system alarms when
the target strays ±300 feet from
the controller–assigned altitude.
What type of DAIR system do you
have?
Type 10
A controller using a CATCC DAIR
system has which of the following
information available at his/her
console?
All of the above
As an aircraft leaves the CATCC
controller’s area of respon–
sibility, it is passed to which of
the following controllers?
Another CATCC control position
Which type of DAIR system would be
used for amphibious operations?
Type 12
Each DAIR system provides
information to allow control of
aircraft within a given area.
Which type has a responsibility
area of 50 nautical miles
surrounding the ship?
Type 8
Which type of DAIR system has the
AOA as its responsibility area?
Type 12
On board your carrier you have
just updated your AN/TPX–42A(V)8
to a (V)12. Which additional
system can now interface with your
DAIR?
ITAWDS
A technician trained to maintain a
RATCF DAIR system will have what
NEC?
ET-1578
A technician trained to maintain
an AIMS Mk XII IFF system will
have what NEC?
ET–1574
A technician trained to maintain
an AATC DAIR system will have what
NEC?
ET-1576
Which of the following systems, if
any, integrates other systems and
subsystems to perform detection
and entry functions?
NTDS
Which of the following are combat
system functions controlled by
NTDS?
All of the above
As an ET you are responsible for
maintenance on which of the
following NTDS-related equipment?
Video and sync amps
What publication, if any, provides
information on radar and NTDS as
an integrated system on your ship?
CSTOM
The Combat Systems Technical
Operations Manual provides
information required to take which
of the following actions?
All of the above