Equipment Tag-Out Procedures

Front 1

What is the purpose of the equipment tag-out procedures?

Back 1

Provides units with a standardized equipment tag-out procedure as required by COMDTINST M9000.6

Front 2

The use of tag is temporary and not a substitue for what?

Back 2

Chaining, locking valves, removing fuses, or racking out circuit breakers.

Front 3

Tags should never be used for what?

Back 3

valve identification, marking leaks, or any purpose not specified in teh tag-out procedure manual

Front 4

Caution tags are what color?

Back 4

Yellow

Front 5

Danger tags are what color?

Back 5

Red

Front 6

Out-of-Calibration tag is what color?

Back 6

Orange

Front 7

Out-of-commission tag is what color?

Back 7

Red

Front 8

Which tag provides a special set of instructions and you must get permission from the EOW before use.

Back 8

Caution Tag

Front 9

Which tag prevents any and all use of equipment under all circumstances?

Back 9

Danger Tag

Front 10

Which label identifys equipment that may not give proper indications due to being out of tollerance.

Back 10

Out-Of-Calibration Label

Front 11

Which label identifys equipment not in use because of being defective or issolated from the system?

Back 11

Out-Of-Commission Label

Front 12

How many tag-out logs are required for WHEC, WMEC, and WAGB cutter classes?

Back 12

Two to be maintained by operations and engineering departments.

Front 13

A copy of what should be placed in the front of the tag-out log?

Back 13

A copy of teh AUTHORIZED OFFICERS letter(s)

Front 14

Who is ultimately responsible for the safety of all maintenance personnel and for the protection of the cutters equipment?

Back 14

Commanding Officer

Front 15

After a tag is placed what must a second person do?

Back 15

Verify that the system or equipment is in the position or condition indicated by the tag and that the tag is properly placed.

Front 16

The person cheking the tag shall not be what?

Back 16

The same person who attached the tag

Front 17

Danger and Caution tags shall be removed when?

Back 17

Immediatley when the situation requireing the tag-outs has been corrected.

Front 18

No tags shall be cleared without approval from who?

Back 18

Authorizing Officer

Front 19

Who can remove a tag and submit it for clearance?

Back 19

ONLY the person who attached it.

Front 20

When there are multiple tags in place which ones take precedence?

Back 20

Danger tags

Front 21

Checks and Audits of all tag-outs are required how often, and by who?

Back 21

Once every two weeks by the cognizant department head.

Front 22

Who should perform a spot check of installed tags?

Back 22

Authorizing Officer's

Front 23

The tag number shall start on what date of each year? And what number will they start at?

Back 23

01 October

(E/O)-001

Front 24

Who is responsible for ensuring a daily inventory of all department PMS tags by serial number?

Back 24

The Department Head