Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
30 Cards in this Set
- Front
- Back
How many main parts make up the construction of the standard screwdriver? |
Three |
|
What makes a standard screwdriver different from a Phillips head screwdriver? |
Tip is shaped different |
|
The Stillson adjustable wrench is equipped with how many Jaws? |
2 |
|
What provides gripping ability on the Stillson adjustable wrench? |
Serrated teeth |
|
When a definite Force must be applied to a nut or bolt head, what tool must be used? |
Torque wrench |
|
The hinges on Bolt cutters should be kept? |
Well oiled |
|
What tool can be used as a lever for moving heavy objects short distances? |
Wrecking Bar |
|
The term pneumatic describes what type of power source? |
Air |
|
Excessive air pressure when utilizing pneumatic tools will result in? |
Damage to the tool |
|
The average size electric drill is equipped with what capacity, three-finger Chuck? |
1/4 |
|
The pneumatic chipping hammer is another too useful to the ABH when scaling? |
Large areas |
|
Which power tools can be manufactured to be powered by air or electricity? |
Rotary impacts scalar or portable sander |
|
Where exact measurements are required, what measuring tool is used? |
Caliper |
|
On a steel or tape ruler the long line represents? |
Inch mark |
|
What should be done to prevent tape or fiberglass rules from kinking? |
Pulled straight from the case |
|
A dynamometer is an apparatus used to determine? |
Breaking strength |
|
Uses for the dynamometer may include determining the breaking strength of the tensioning system of what equipment on shore? |
E28 |
|
Before portable electrical tools are used for the first time after procurement, they should be inspected by? |
Electrical safety officer |
|
Personnel operating power tools that produce excessive noise level are required to wear hearing protection issued by? |
Divisional Supply representative |
|
What class explosion-proof Electric Tools should be utilized where expose explosives are present? |
One |
|
Handheld portable electric tools authorized for use onboard ships shall be equipped with? |
ON/OFF switch |
|
Extension cords should be no longer than 25 feet in length except when use on what class ship? |
CVN |
|
Which of the following are allowed to be worn around rotating machinery? |
Earrings |
|
It is required to wear leather gloves when handling |
Sharp material |
|
Tending lines are used for |
Personal safety |
|
Generally, small stuff is line that is less than? |
1 3/4 inches |
|
What knot is used to secure components on the MK1 life preserver? |
Bowline |
|
When would an ABH possibly require the use of a block and tackle? |
Overturning a crashed aircraft |
|
What is the mechanical advantage of the gun tackle? |
2.1 |
|
It is imperative that equipment be stowed in its assigned area for what reason? |
Ready for use |