Eidws Common Core 105

Front 1

Discuss the purpose of the 3-M/PMS System

Back 1

This system provides maintenance and material managers throughout the Navy with a process for planning, acquiring, organizing, directing, controlling and evaluating the manpower and material resources used to support maintenance.

Front 2

Explain how DPAS is used to track equipment.

Back 2

DOD property management system

Front 3

Discuss the purpose of the MOV program.

Back 3

A MOV is a request from supply source to a requisitioner/control office to validate that outstanding requisitions are still required.
-Validation of need
-Reconciliation of records

Front 4

Discuss the DLRs program.

Back 4

Depot Level repair Program. DLR manages high level items which can not be repaired nor reused.

Front 5

Explain the procedures for NRFI DLRs in regard to turn in and RIP.

Back 5

Not Ready For Issue
Turn in: The part needs to be turned in to get replacement.
Remain in Palce: It needs to remain in place until the new part arrives.

Front 6

Define the purpose of MAM.

Back 6

Maintenance Assist Module - Replaceable assemblies needed to perform an approved maintenance plan which calls for identifying the fault of failed module through progressive and selective module substitution.

Front 7

Define the purpose of Bulkhead mounted spares.

Back 7

Spares that are kept in the work center due to size or cost resulting on the parent department head to be responsible for upkeep on them Normally an engineering itam.

Front 8

Define the term CASREP.

Back 8

CASREPS are to be used in the event of an equipment malfunction or deficiency which cannot be corrected within 48 hours, reduces unit's ability to perform a primary mission, secondary mission, or a training commands ability to perform its mission.

Front 9

Explain the four categories of a CASREP.

Back 9

i. Used only at training commands: A casualty exists but does not cause a break in training.
ii. A deficiency exisits in mission essential equipment which causes a minor degrade in any primary mission, or a major degrade or total loss of a secondary mission.
iii. A deficiency exists in mission essential equipment which causes a major degredation but not loss of a primary mission.
iv. A deficiency exists in mission essential equipment that is worse than category 3, and causes a loss of at least one primary mission.

Front 10

Define NSN.

Back 10

National Stock Number a 13 digit # assigned by the DLA to ID an item of material in the supply distrobution system.

Front 11

Define COG.

Back 11

Cognizance a 2 character symbol that designates the stores account in which type of material is carried and the responsible inventory control point.

Front 12

Define APL.

Back 12

Allowance Part List a technical document prepared for individual equipment component whichare onboard. it lists all the repair parts installed on the equipment/componentwhich it applies.
APL 9 digit # by SPCC

Front 13

Define AEL.

Back 13

Allowance Equipment List, Contains the onboard allowance of equipage and supplies to support the ships mission.

Front 14

Define NC.

Back 14

Not Carried no storeroom allowance.

Front 15

Define NIS.

Back 15

Not in stock not in stock at this time.

Front 16

Define SIM.

Back 16

Selected itam maintenance inventory control system by which maximum attention is given to those items experiencing high rate of usage.

Front 17

State the purpose of the DD form 1348-6.

Back 17

MILSTRIP requistioning form

Front 18

State the purpose of the NAVCOMPT 227.

Back 18

Request for Contractual Procurement

Front 19

State the purpose of the NAVSUP 1250-2.

Back 19

Non NSN Requisition

Front 20

State the purpose of the DD Form 448.

Back 20

Military Interdepartmental Purchase

Front 21

State the purpose of the SF 44.

Back 21

Purchase order/Invoice/Voucher

Front 22

State the purpose of the DD Form 1155.

Back 22

Order for Supplies of services

Front 23

State the purpose of the SF 1449.

Back 23

Solicitation/Contract/Order for Commercial Items

Front 24

State the purpose of the SF 30.

Back 24

Amendment of Solicitation/ Moification of Contract.

Front 25

State the purpose of the DD Form 200.

Back 25

Financial Liability Investigation of Property Loss (FLIPL)

Front 26

State the purpose of the SF 364.

Back 26

Report of Discrepancy (ROD)

Front 27

State the purpose of the SF 386.

Back 27

Quality Deficiency Report

Front 28

Discuss CHRIMP.

Back 28

Consolidated Hazardous Material Reutilization and inventory Management Program is a successful method to achieve life cycle control and management of hazardous Material (HM) and Hazardous Waste (HW)

Front 29

Discuss DRMS.

Back 29

Defense Reutilization and Marketing Service is a component of the DLA.

Front 30

Discuss ServMart.

Back 30

A warehouse designed store which carries NSN items to be bought with a gov purchase card.

Front 31

Discuss the uses of the Gov commercial purchase Card (IMPAC)

Back 31

Streamline the DON financial management and procurement proces by reducing admin burden.

Front 32

Explain OPTAR and its components.

Back 32

Operating Target is an estimate of the amount of money that will be required by an operating unit to perform tasks and functions assigned.
-FLTCOMS receive OPTAR from CNO
-FLTCOMS issue funds to the respective TYCOMS which then issue to the commands under them.

Front 33

State the difference between Normal Power, Emergency Power, and Uninterrupted Power.

Back 33

NP - Standard power supplied for normal daily usage.
EP - Secondary power source provided only to vital equipment/system in the event of a casualty.
UP- Minimal battery power provided to a electronic equipment in order to properly power down the system.