Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
14 Cards in this Set
- Front
- Back
|
Discuss the following Operational Target (OPTAR) funding and give examples of items procured with each:
|
Flight Operations Fund(OFC-01)
Aviation Fleet Maintenance(AFM)Fund |
|
|
Define the acronym MILSTRIP and state its purpose.
|
Military Standart Requistioning and Issue Procedure - A uniform procedure established by DOD for its own use to govern requistion and issue of material within standard priorities.
|
|
|
ICRL (Individual Component Repair List) -
|
A detailed statement of IMA's component repair capability that contains existing repair capability data on items previously processed by the IMA. It also identifies items that are capable of repair or for which future repair is not planned.
|
|
|
CRIPL (Consolidated Remain-In-Place List) -
|
A listing of all authorized remain in place items which is published by NAVICP and approved by the TYCOMs and COMNAVAIRSYSCOM.
|
|
|
NMCS (Not Mission Capable Supply) -
|
Material condition of and aircraft that is not capable of preforming any of its mission because maintenance required to correct the discrepancy cannot continue due to a supply shortage.
|
|
|
PMCS (Partial Mission Capable Supply) -
|
Material condition of and aircraft that can perform at least one but not all of its mission because maintenance required to correct the discrepancy cannot continue due to a supply shortage.
|
|
|
NSN (National Stock Number) -
|
A 13 digit stock number assigned by the Defense Logistics Services Center (DLSC) to identify an item of material in the supply distribution system. It consists of a four digit federal supply classification (FSC), and a nine digit national item identification number (NIIN).
|
|
|
NIIN (National Item Identification Number) -
|
A 9 digit number that consists of a two digit national codification bureau (NCB) code and seven digits which, in conjunction with the NCB code, uniquely identify each NSN item in the federal supply distribution system.
|
|
|
AVDLR (Aviation Depot Level Repair) -
|
AVDLRs are financed by the NWCF. Under this process, the end user finances the D-level repair and procurement of 7R COG repairables through the local replenishment of these repairables to replace BCMd, lost, or missing components. Although the squadron usually initiates repairable demands, the IMA has primary control over whether these transactions would result in an AVDLR NWCF charge.
|
|
|
IMRL (Individual Material Readiness List) -
|
A consolidated list that shows items and quantities of certain SE required for material readiness of the aircraft ground activity to which the list applies.
|
|
|
AIR (Aircraft Inventory Records) -
|
The AIR is used to establish a formal, continuous chain of accountability for specific equipment and material installed on or designated for use on any aircraft of a specified T/M/S. An AIR is applicable to all aircraft of a specified T/M/S and lists selected material and equipment accountable by all Navy or Marine Corps organizations that are assigned or physically possess operational aircraft.
|
|
|
EXREP (Expeditious Repair) -
|
The processing for repair of NIS or NC components (repairable or consumable) which must be in support of, or related to, an NMCS or PMCS situation.
|
|
|
What is a flight packet used for?
|
Supply officers or Material Control officers of aviation activities will be responsible for flight packets for issue to pilots making extended flights. These flight packets will contain instructions to assist pilots of aircraft involved in extended flights to obtain material or services which may be necessary for the continuation of a flight.
|
|
|
Explain the purpose of Source, Maintenance, and Recoverability (SM&R)codes.
|
SM&R codes are used to communicate maintenance and supply instructions to various logistic support levels and using commands for the logistic support of systems, equipment, and end items. These codes are made available to their intended users by means of technical publications, such as allowance lists, IPB manuals, MIMs, and supply documents.
|
