Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
56 Cards in this Set
- Front
- Back
- 3rd side (hint)
Your customer has temporarily installed RSA’s DLP Endpoint agents to identify sensitive data stored on or in use on laptops and desktops. Unfortunately, the customer discovered that these machines have been used to transmit sensitive data outside the organization. The customer now would like to place an enforcement policy on all discovered data on these laptops and desktops. What must the customer do?
Reinstall the original agents Nothing. DLP will automatically place an enforcement policy when the data is identified Install a separate distinct permanent agent Purchase RSA’s DLP Network product |
Topic: DLP
Training: Resource Management, Information Security, and EMC Proven Solutions |
Install a separate distinct permanent agent
|
|
A customer has a VNX5300 and is running multiple OLTP applications that must meet certain SLAs. The customer would like to set certain parameters within the VNX to guarantee uptime for the environment? Which software from EMC should the customer choose?
EMC Performance Manager EMC Event Enabler EMC Unisphere Analyzer EMC Quality of Service Manager |
Topic: Unified - Block
Training: Unified |
EMC Quality of Service Manager
|
|
Which Atmos role is used to create new system administration accounts (SysAdmins)?
SystemAdmin SubTenantAdmin SecurityAdmin TenantAdmin |
Topic: Atmos
Training: Cloud |
SecurityAdmin
|
|
A customer wants to implement a solution that correlates, consolidates, and integrates collected information and provides a detailed perspective on the entire infrastructure. Which EMC IT Operations Management software would you recommend?
Storage Insight for Availability MPLS Domain Manager Service Assurance Manager IP Availability Domain Manager |
Topic: Ionix IT Ops. Insight
Training: Resource Management, Information Security, and EMC Proven Solutions |
Service Assurance Manager
|
|
A customer has an ERP system protected by SRDF/A. However, due to a network issue their carrier encountered, the customer experienced a link loss for six hours.
When the network issue was resolved, the links came back up and SRDF was restarted. Prior to SRDF/A resuming cycle switching, there was a disaster at the source site, rendering the R1 array unusable. The ERP system was not startable at the disaster recovery site and the customer had to restore from tape. What would prevent this from happening in the future? Use Consistency Groups and set SRDF QoS to 0 Implement snaps on the target side and split them prior to resuming SRDF after a network outage Implement clones with TimeFinder Consistency Groups on the source side and split them prior to resuming SRDF after a network outage Implement clones on the target side and split them prior to resuming SRDF after a network outage |
Topic: SRDF
Training: Symmetrix |
Implement clones on the target side and split them prior to resuming SRDF after a network outage
|
|
Your customer has requested a replication solution that has both full and incremental copies of their source data. They have two data centers, one primary with a VMAX and one secondary with a VNX7500. It is important that they are able to make multiple copies of their data. What is the best replication solution for them if bandwidth is not an issue?
SRDF/A SnapView SAN Copy SRDF/S |
Topic: SAN Copy
Training: Unified |
SAN Copy
|
|
A customer is currently backing up seven clients using Networker 7.6 Workgroup edition. The customer wants to add four more client connections to their backup environment. What must they do?
Nothing. Workgroup Edition supports up to 12 client connections Upgrade to Network edition and add one client connection Upgrade to Network edition Add four more client connections |
Topic: NetWorker
Training: Backup |
Upgrade to Network edition and add one client connection
|
|
What is the maximum number of read I/Os performed for every write operation during the data verification process on an FLR-C enabled file system?
1 2 3 4 |
Topic: Unified - File
Training: Unified |
3
|
|
In addition to the TimeFinder (TF) base solutions, what are two add-on solutions?
TF/Snap and TF Consistency Groups TF/Exchange Integration Module and TF Consistency Groups TF/Snap and TF/Clone TF/Exchange Integration Module and TF/Clone |
Topic: TimeFinder
Training: Symmetrix |
TF/Exchange Integration Module and TF Consistency Groups
|
|
What are the three core modules of UIM?
Service Management, Configuration Management, Device Access Network Configuration Management, Service Management, Device Access Device Access, Configuration Management, Service Assurance Management Service Assurance Management, Network Configuration Management, Device Access |
Topic: UIM
Training: Virtualization |
Service Management, Configuration Management, Device Access
|
|
You have a customer that is looking for a Vblock that will support shared services like Email, File and Print and Virtual desktops.
Which Vblock Type would you recommend? Vblock Type 2 Vblock Type 1u Vblock Type 0 Vblock Type 1 |
Topic: Vblock
Training: Virtualization |
Vblock Type 1
|
|
How many Stores can you have in a single host infrastructure of EMC Ionix ControlCenter?
1 2 3 Unlimited |
Ionix ControlCenterResource Mgmt, Information Security & Proven Solutions
|
One
|
|
In reference to SnapView on a VNX array, when you activate a snapshot what does this process accomplish?
Makes a snapshot available to a secondary host Makes a snapshot of the secondary hosts primary LUN Maps a snapshot to an available snapshot session Makes a snapshot available to the primary host |
SnapView
Unified |
Makes a snapshot of the secondary hosts primary LUN
|
|
An EMC customer’s VNX storage requirements include the need for 600 TB of usable file capacity. What is the minimum number of active Data Movers that must be included in the configuration?
1 2 3 4 |
Unified-File
Unified |
One
|
|
Which feature of VPLEX Metro enables a single copy of data to be shared, accessed, and transparently relocated over distance?
Controller Virtualization AccessAnywhere VMwareVmotion GlobalFederation |
VPLEX
Virtualization |
AccessAnywhere
|
|
A company wants to perform application consistent snaps on its CLARiiON arrays for its 10 Oracle, 5 Microsoft Exchange, and 20 MS SQL virtual machine application servers. Which EMC technology provides the best integration solution for this environment?
MirrorView Replication Manager SnapSure SnapView |
Replication Manager
Replication |
Replication Manager
|
|
Which customer will likely be a good candidate for a Greenplum DCA solution?
One with a both OLTP & OLAP requirements One with a small OLAP requirements One with a large OLAP requirements One with a large OLTP requirements |
Greenplum
Cloud |
One with a large OLAP requirements
|
|
A customer has rolled out several virtual servers using VMware ESX. The customer wants to simplify the virtual machine management across all ESX servers. Which product should you discuss?
EMC Navisphere VMware Service Console EMC Ionix ControlCenter VMware VirtualCenter |
VMware vCenter
Virtualization |
VMware vCenter
|
|
Which VNX feature will reduce a customer's TCO with automatic storage tiering?
FAST Cache Optimization for Virtualization Compression and Deduplication |
Unisphere
Unified |
FAST VP
|
|
In the EMC Integrated Infrastructure for VMware – Business Continuity Proven Solution, which EMC Backup Technology is recommended?
Celerra Snapshots Avamar Networker Data Domain |
EMC Proven Solutions
|
Avamar
|
|
A customer uses EMC MirrorView for data replication to a remote site. If the production site loses all power, local generators that will give enough time to failover to the remote site. You start the failover process and notice that one LUN is not coming up on the remote site. Why can you not bring this LUN online by promoting to primary?
The link between the sites has been severed The LUN is not fully synchronized and is not in a consistent state The secondary LUN has a different MirrorView identification The primary and secondary LUN have been fractured |
MirrorView
Unified |
The LUN is not fully synchronized and is not in a consistent state
|
|
You want to configure PowerPath to load balance from a Sun server ( FC Block LUN ) to an VPLEX array based on the number of pending I/Os in each of the queues. Which PowerPath load-balancing policy meets this requirement?
No Redirect (nr) Request (re) Least I/O (lo) Least Blocks (lb) |
PowerPath
SAN |
Least I/O (lo)
|
|
You have a large enterprise customer that has a mixed EMC and NETAPP environment. The customer uses FMA on its Celerra. The customer also want to use FMA on their NETAPP Filer. What migration method is supported on both the Celerra and NETAPP filer?
Pass-through Recall Secondary Recall Partial recall Full Recall |
FMA (aka CTA)
|
Full Recall
|
|
What operating system does the FMA application run on?
Solaris LINUX Windows DART |
FMA (aka CTA)
Unified |
Linux
|
|
A RecoverPoint CLR and CDP deployment consists of a dual RPA node cluster at a local and remote site. Each site has 4 configured consistency groups. At a minimum, how many total journal volumes are required and why?
1 – a minimum of one journal volume is required, since it is shared between all consistency groups and it is shared between sites 2 – because a minimum of one journal volume is required for both sides (local and remote) regardless of the number of configured consistency groups 4 – a minimum of one journal volume is required for each configured consistency group, but only at the local site since the journals are shared across sites 8 – a minimum of one journal volume is required for each configured consistency group on both sides (local and remote) |
RecoverPoint
Replication |
8 – a minimum of one journal volume is required for each configured consistency group on both sides (local and remote)
|
|
Your customer wants to implement a disaster recovery solution at a secondary site which is also a production site. The customer is concerned about the number of extra resources that will be needed at the secondary site to support the primary site in the event of a disaster. Which vSRM capability should you mention?
The ability to restart the highest priority machines at the secondary site The ability to suspend non-critical VMs at the secondary site The ability to use Storage-replicated datastores for automated protection The ability to remotely turn off VMs at the primary site |
VSM
Virtualization |
The ability to restart the highest priority machines at the secondary site
|
|
A Textile Company is concerned that storage is growing out of control on their DMX-4. Recently, the deployment schedule for SAP was cut in half so they now have several developers each wanting a separate copy of the Oracle database for application development and testing. They are using TimeFinder/Clone to manage the requirements today.
Which solution can be used to reduce the storage requirements for developers? SAN Copy TimeFinder/Snap Open Replicator Replication Manager |
TimeFinder
Symmetrix |
TimeFinder/Snap
|
|
An EMC customer does not currently have any Data Domain systems in its IT environment. The customer seems very interested in a deduplication system; however, the has expressed concerns about Data Domain's capacity and performance scaling capabilities. This is a perfect time to discuss what key Data Domain architectural design concept?
Data Domain disk-centric scaling SISL's use of enterprise flash drives Data Domain's post-process deduplication for fast ingest SISL's inline, CPU-centric deduplication process |
Data Domain
Backup |
SISL's inline, CPU-centric deduplication process
|
|
Which VMware application discovery approach is network-based using deep packet inspection?
Remote Listener Active Passive |
vADM
Virtualization |
Passive
|
|
When using a Connectrix system, what is a benefit of a Compound Core/Edge Fabric?
One hop access to storage Easy to migrate to full-mesh Reduces power consumption Reduces ISL requirements |
Connectrix
SAN |
Reduces ISL requirements
|
|
Your customer installed all the appropriate agents on the infrastructure host in their environment. What gets discovered automatically in EMC Ionix ControlCenter?
CLARiiON Brocade Celerra Symmetrix |
Ionix ControlCenter
|
??
|
|
You have a customer that requires a combination of snapshots and clones with point-in-time recovery. They also require DVR-like rollback capabilities for business continuity on block-based storage. This will allow for recovery of production applications with minimal data exposure.
What VNX software suite allows for this? Application Protection Suite Local Protection Suite FAST Suite Remote Protection Suite |
Unified - Block
Unified |
Local Protection Suite
|
|
A customer is using SnapView to take point-in-time copies of a database before running a batch process that sometimes causes corruption. The process is run several times a day, and so several copies need to be maintained. What recommendation would you make when sizing the Reserved LUN Pool?
Create four times as many reserved LUNs, with each reserved LUN size equal to 10% of the average source LUN size Create two times as many reserved LUNs, with each reserved LUN size equal to the source LUN size Create two times as many reserved LUNs, with each reserved LUN size equal to 10% of the average source LUN size Create one reserved LUN equal in size to the source LUN |
SnapView
Unified |
Create four times as many reserved LUNs, with each reserved LUN size equal to 10% of the average source LUN size
|
|
What Cisco Java-Based tool simplifies management of a MDS series Switch/ Director?
Simple Network Management Product (SNMP) Fabric Manager (FM) Webtools Enterprise Fabric Connection Manager (EFCM) |
Connectrix
SAN |
Fabric Manager (FM)
|
|
A customer has a VNX 7000 series array at both a production site and disaster recovery (DR) site located 18 miles apart. The customer needs to replicate a 90 GB Microsoft SQL Server 2008 database that has a 10% daily rate of change. The customer is interested in a DR solution that yields zero data loss and that has a RTO in seconds. If bandwidth is not an issue, which solution should you recommend?
RepliStor MirrorView/S MirrorView/A SRDF/S |
Mirrorview
Unified |
MirrorView/S (SRDF is a Symmetrix product, not VNX)
|
|
What is a key competitive advantage of PowerPath in a cluster environment?
Maintains live I/Os though cluster failover Performs load balancing across clustered hosts Improves speed of cluster failover Eliminates application downtime due to a single path failure |
PowerPath
SAN |
Eliminates application downtime due to a single path failure?
|
|
You have a customer looking to improve their IT customer satisfaction levels and SLAs by deploying an ITIL-based service request and fulfillment system?
What solution from VMware meets these needs? vCenter VCM vSphere VSM |
VSM
Virtulaization |
VSM
|
|
A company uses EMC SourceOne email archive for 15,000 users that must abide by U.S. Department of Defense compliance regulations. Because of security concerns, the Department of Defense requires that certain users’ email traffic be monitored for leakage of any confidential data. Which EMC product will allow the data center administrator to open the users’ messages without the users knowing?
EMC File Management Appliance EMC Examiner EMC Captiva EMC DiskXtender |
SourceOne
Archive |
EMC Examiner
|
|
A company data center includes a VNX with file Services implementation. The system administrator wants a solution that will recover corrupt or lost files and uses the least amount of space. Which solution meets the customer requirements?
Celerra Replicator MirrorView SnapSure SnapView |
Unified - File
Unified |
SnapSure
|
|
You can use Open Replicator for Symmetrix to recover local volumes in the event of logical or physical loss of data at the local site or for migration purposes. In what mode, can you access the local Symmetrix volumes as soon as the copy session begins?
Pause Sync Live Real |
Open Replicator
Symmetrix |
Live
|
|
A customer is building a solution with both local and remote replication. The customer's production data will reside on mirrored volumes on a Symmetrix DMX-4. The production volume will then be replicated to a target DMX volume that is mirrored. The remote mirrored volume will then have a business continuity volume created from it.
The customer is concerned that this solution exceeds the number of mirrors a volume can have. To eliminate the customer's concern and explain the solution, which mirror position does the business continuity volume occupy during a normal establish to the remote mirrored volume? M1 M2 M3 M4 |
TimeFinder
Symmetrix |
M1?
|
|
What is the UCS Manager's native language?
Visual Basic REXX XML Visual C++ |
Vblock
Virtualization |
XML
|
|
Your customer wants to generate reports that facilitate asset management and chargeback across heterogeneous (CLARiiON, Symmetrix, etc.) arrays. The customer also wants to maintain classification of storage according to SLAs. Which product would you recommend?
Network Configuration Manager Storage Insight for Availability StorageScope Service Assurance Manager |
*Notes Required, in progress*
|
StorageScope
|
|
You have just sold a Vblock to a long time customer; however, the customer is not convinced that UIM is better than simply using the element managers that the customer’s team is already familiar with. What would you say to persuade this customer?
Allocation, deployment and rapidly changing requirements and hardware make repeatable infrastructures easier to achieve Templates can be used to reduce configuration errors and ensure compliance Management will be compartmentalized between different divisions and organizations within the company Application, storage and connectivity requirements are known by the individual administrators |
*Notes Required, in progress*
|
???
|
|
A customer uses EMC MirrorView for data replication to a remote site. If the production site loses all power, local generators that will give enough time to failover to the remote site. You start the failover process and notice that one LUN is not coming up on the remote site. Why can you not bring this LUN online by promoting to primary?
The secondary LUN has a different MirrorView identification The link between the sites has been severed The LUN is not fully synchronized and is not in a consistent state The primary and secondary LUN have been fractured |
*Notes Required, in progress*
|
The LUN is not fully synchronized and is not in a consistent state
|
|
Where is information about which volumes contain Networker save sets located?
Client File Index Save Set Recovery Index Tape Library Index Media Database |
*Notes Required, in progress*
|
Media Database
|
|
A company wants to perform application consistent snaps on its CLARiiON arrays for its 10 Oracle, 5 Microsoft Exchange, and 20 MS SQL virtual machine application servers. Which EMC technology provides the best integration solution for this environment?
SnapSure MirrorView Replication Manager SnapView |
*Notes Required, in progress*
|
Replication Manager
|
|
In the EMC Archiving for MS Exchange 2007 Proven Solution, how is data stored and accessed?
Exchange and SQL database via the Fiber Channel network; SourceOne Email Management data via iSCSI Exchange and SQL database via the CIFS or NFS; SourceOne Email Management data via iSCSI Exchange and SQL database via the CIFS or NFS; SourceOne Email Management data via the Fiber Channel network Exchange and SQL database via the Fiber Channel network; SourceOne Email Management data via CIFS or NFS |
EMC Proven Solutions
|
Exchange and SQL database via the Fiber Channel network; SourceOne Email Management data via CIFS or NFS
|
|
A customer uses the EMC File Management Appliance for archiving purposes from his VNX5700 to a local Centera that has eight (8), Gen4 Storage Nodes. The customer has just hired a new administrator to manage the FMA. This new administrator prefers to use the CLI function in FMA. Which can you enable to allow one user name/password sign on to the FMA for GUI and CLI functions?
Unified Database RainShield The PEA file FMA Radius |
FMA (aka CTA)
|
RainShield
|
|
A customer has the requirement to update remote data centers with new information every 3 to 4 hours with data that resides on a VNX5300 at the production site. Which technology would be best to push data to these remote locations within the required time limits?
RecoverPoint Continuous Data Protection Incremental SAN Copy MirrorView Asynchronous MirrorView Synchronous |
SAN Copy
|
Incremental SAN Copy
|
|
In RecoverPoint, what is the minimum size for a journal volume?
3 GB 5 GB 6 GB 10 GB |
RecoverPoint
see RecoverPoint.pdf page 11 |
Tricky - 5 GB
Min journal size = 5 GB (max 10) Min Repository size = 3 GB (max 3GB) Replication Volumes = 2TB minus 512 Bytes) |
|
Which of the Unified VNX platforms will support 8 data movers and 1000 disks?
VNX5100 VNX5300 VNX5500 VNX7500 |
Unified
|
VNX7500 = 1000 disks
VNX5700 = 500 VNX5500 = 250 VNX5300 = 125 |
|
A customer uses a Celerra to provide CIFS shares to business units to store documents and spreadsheets. An EMC Avamar solution has been selected for backup and recovery.
Which Avamar component provides specialized support for this environment? Avamar Storage Node Avamar CIFS Accelerator Node Avamar NDMP Accelerator Node Avamar Utility Node |
Avamar
|
Avamar NDMP Accelerator Node
|
|
How many hard drives are needed at a minimum for a direct attached cabinet (Storage Bay) on a VMAX engine?
36 48 96 120 |
Symmetrix
|
48
Trick question, per engine. 96 disks is minimum for VMAX system |
|
Which VMware product allows you to control your infrastructure with a single pane of glass view?
VPM VCM SPA VSM |
VMware
Virtualization |
VCM
Single Pane is the key |
|
When are data chunks saved to the Reserved LUN Pool in a SnapView Write operation?
Each time data is written to the source Each time data is accessed on the source Each time data is changed on the source Each time source data is changed for the first time |
SnapView
Replication |
Each time source data is changed for the *first* time
|