• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/19

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

19 Cards in this Set

  • Front
  • Back

Open the bonnet, identify where you would check the engine oil level and tell me how you would check the engine has sufficient oil?

Identify dipstick, describe check of engine oil against the max/min markers

Open the bonnet, identify where you would check the engine coolant level and tell me how you would check the engine has the correct level?

Identify High/low level markings on header tanker where fitted or radiator filler cap , and describe how to top up to correct level

Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level

Identify reservoir, explain how to check level

Open the bonnet, identify where the brake fluid reservoir is and tell me how you would check that you have a safe level of hydraulic brake fluid

Identify reservoir, check level against high/low markings

Show me how you would check that the brake lights are working on this car

Operate brake pedal, make use of reflections in Windows, garage doors etc, or ask someone to help

Tell me how you would check that the brakes are working before starting a journey?

Brakes should not feel spongy or slack, brakes should be tested as you set off. Vehicle should not pull to one side.

Tell me where you would find the information for the recommended tyre pressure for this car and how pressure should be checked?

Manufacturers guide, use a reliable pressure gauge, check pressure when tyres are cold, don't forget spare tyre and refit valve caps

Tell me how you would check the tyres to ensure that they gave sufficient tread depth and that their general condition is safe to use on the road

No cuts, no bulges, 1.66mm of tread across the central 3/4 of the tyre and around the entire circumference.

Show me how you would check the power steering is working before starting a journey?

If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively, turning the steering wheel just after moving off will give an immediate indication that the power assistance is working.

Tell me how you would check that the headlights and tail lights are working (no need to exit the vehicle)

You would operate the switch to turn them on, and than walk around the vehicle.

Show me how you would check that the direction indicators are working

Applying the indicators or hazard warning switch and than check they're working.

Show me how you would check that the horn is working

Check is made by honking horn

Show me how you would check the parking brake (handbrake) for excessive wear, make sure you keep control of the vehicle

Demonstrate by applying the parking brake, so that when it is fully applied it secured itself. Use footbrake to keep control.

Show me how you would clean the windscreen using the windscreen washers and wipers?

Operate control and wash and wipe windscreen

Show me how you would use the demister controls to clean all windows effectively

Set all relevant controls, including fan, temperature, air direction/source and heated screen to clear windscreen and windows.

Show me how you would switch on the rear fog lights and explain when to use them

Operate switch turn - check warning lights is on, explain that usage is for fog when less than 100m of visibility

Show me how you would switch your headlight from dipped to main beam and explain how you would know the main beam is on whilst inside the car?

Operate switch - check main beam warning light

Tell me how you make sure your head restraint is correctly adjusted so it provided the best protection in a crash

The head restraint should be adjusted so the rigid part of the restraint is at least eye level or top of ears, and as close to the back of the head as is comfortable.

Tell me how you would know if there was a problem with your anti lock braking system?

Warning light should illuminate if there is a fault