Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
49 Cards in this Set
- Front
- Back
______ is a psychological reaction some patients encounter upon becoming edentulous (loss of teeth). |
Trauma |
|
Final impressions are taken using ____ impression trays. |
Custom impression trays |
|
The baseplate is sent to the dentist with the occlusal rim attached |
True |
|
Tooth shade and mold should be decided by the lab technician before the occlusal rim try-in. |
True |
|
Which of the following materials should be only utilized during the taking of preliminary impressions? |
Agar hydrocolloid |
|
Preliminary impressions materials can only be used to pour _____ model(s). |
One |
|
The most popular final denture impression materials is a _____ |
Polysulfide (rubber base) |
|
____________ is a reversible impression material |
Agar Hydrocolloid |
|
During the 2nd wax bite rim try-in the teeth are set in the wax bite rims. |
True |
|
Master model casts are poured from the final impressions before.... |
the 1st wax bite rim try in |
|
Occlusal rims, wax bite rims, record bases with occlusal rims, base plates with bite rims, are terminology not referring to the same product. |
False... They are all referring to the same product. |
|
What model pouring procedure would you use for mandibular preliminary impressions? a. Two stage b. bead and box c. dump and slump d. upright |
Two stage |
|
What model pouring procedure would you use for maxillary preliminary impression? a. Two stage b. bead and box c. dump and slump d. upright |
Upright |
|
What model pouring procedure should not be used? a. Two stage b. bead and box c. dump and slump d. upright |
Dump and slump |
|
Put the following steps for denture construction in order. - Models with bite rims are articulated, and wax up is completed. - Preliminary models are poured - Baseplates with with bite rims are constructed - Final impression is taken - Wax try-in at Dr.'s office (with teeth) |
1.) Preliminary models are poured 2.) Final impressions are taken 3.) Baseplates with bite rims are constructed 4.) Models with bite rims are articulated and wax up is completed 5.) Wax try -in at Dr.'s office (with teeth) |
|
True or false: Most patients are better off with dentures than semi-healthy natural dentition. |
False. Dentures have only about 30% natural mastication of natural dentition. |
|
Match A, B and C with 1-6 A) Outer border of the tray B) Outer border of the relief material C) Depth of the periphery 1) First Drawn Blue line 2) First line you draw (red) reference line only 3) Tray is trimmed to this line 4) Second drawn blue line 5) Placed 2mm from the depth of the periphery 6) Placed 4mm from the depth of the periphery
|
1) [First drawn blue line] A (Outer border of the tray)
2) [First line you draw (red) reference line only] C (Depth of the periphery)
3) [Tray is trimmed to this line] A (First drawn blue line)
4) [Second drawn blue line] B (Outer border of the relief material)
5) [Placed 2mm from the depth of the periphery] A (Outer border of the relief material)
6) [Placed 4mm from the depth of the periphery] B (Outer border of the relief material) |
|
When making custom trays and baseplates, undercuts of all preliminary models can be blocked out with water and a 1:1 ratio of plaster/pumice mix. True or false? |
True. |
|
A custom tray is used for a preliminary impression when making dentures. True or false? |
False |
|
One of the following is a function of the baseplate during: a. Processing b. Denture wax-up c. Wax try-in d. All of the preceding |
All of the preceding. |
|
True or false: Preliminary models are blocked out prior to making the baseplate in order to prevent breakage of the baseplate when it is removed. |
False. |
|
True or false: stabilization is normally accomplished using an autopolymerizing acrylic. |
True |
|
Other names for denture baseplates are.... |
Temporary base, Trail base, record base. |
|
True or false: Does stabilization add stability to the baseplate? |
Duh. |
|
After applying stabilization material is placed in the pressure pot, True or false? |
True |
|
Where is the cold cur acrylic placed during stabilization? |
Inside of the baseplate to adapt it to the tissue better. |
|
The occlusal rim we make in the lab (specific) is called the _____ type rim. |
Rolled baseplate wax |
|
Angle measured from the *mandibular* periphery at the midline to occluding surface |
15 degrees |
|
The distance from mandibular periphery at the midline to the occluding surface |
18 mm |
|
Angle measured from the *maxillary* periphery at the midline to occluding surface |
5 degrees |
|
The distance from mandibular periphery at the midline to the occluding surface |
22 mm |
|
True or false: The line bisecting the retromolar pads horizontally is marked while looking from the anterior of the model |
True |
|
True or false: The cuspid eminence is marked on top of the ridge where the anterior portion of the ridge meets the posterior |
False |
|
When the technician draws the line on the land area adjacent to the retromolar pads looking from the anterior of the model, he/she is trying to establish a/an: |
Left/right |
|
True or false: The lined marked on the land areas at both the retromolar and cuspid areas approximates where the crest of the ridge is. |
True |
|
The anterior height of the mandibular rim is ___mm at 4-6 mm from the midline at the deepest part of the periphery to the occlusual plain |
18 mm |
|
The maxillary wax rim facial angle at the midline is ____ degrees |
5 degrees |
|
The wax occlusual rims serve as a record for _________ ? |
Vertical opening, smile line, midline and occlusual plane placement |
|
True or false: the correct definition for occlusual rims is: Occluding surfaces built on maxillary and mandibular dentures. |
False |
|
What are some characteristics of fully adjustable and semi-adjustable articulators? |
Adjustable condylar guidance, Adjustable guide pin table |
|
What are some characteristics non-adjustable articulators? |
No adjustments, fixed condylar guidance. |
|
What articulator type is used for full mouth reconstruction, mostly in crown and bridge? |
Fully adjustable. |
|
The side shift is also know as the ______ shift |
Bennett |
|
True or false: articulators are designed to show the position of the maxilla in relation to the condyles. |
True |
|
Most denture cases are articulated using the _______ setting |
Arbitrary |
|
Arbitrary condylar setting of ____ is used for Pilkington/turner denture teeth |
30 degrees. |
|
The assumption is made when designing articulators that all jaws fall within the Bonwill triangle which is a _x_x_ triangle |
4x4x4 |
|
What is the first thing you do during arbitrary mounting procedures is to _____ the working models |
Index the models |
|
True or false: The curve of spee in an edentulous patient is established by tooth setting procedures |
True. |