• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/15

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

15 Cards in this Set

  • Front
  • Back
The most accurate are made w/which type of trays
Custom trays
Which impression material is classified as an irreversible hydrocolloid?
Alginate
Which impression material is classified as a reversible colloid?
Agar
A_______is a positive replica of a single tooth.
die
______impressions require the use of a water bath and water cooled impression trays.
Agar impressions
Identify 4 impression materials that are classified as inelastic or rigid materials.
Plaster, wax, impression compound, Zinc oxide eugenol (ZOE)
Which impression material is supplied in two tubes of contrasting color, sets to a brittle solid and is identified easily by the odor of oil cloves
Zinc Oxide Eugenol ZOE
An impression gives a______reproduction of the oral tissues
negative
List two factors that will affect the mixing and setting times of alginate impression material?
water temperature and water to powder ratio
If an alginate impression is left in the mouth for a few extra minutes and the removal time is delayed, the strength of the elasticity will_________
increase
Alginate impressions should be stored in an atmosphere of 100% humidity for the shortest time possible
TRUE OR FALSE
TRUE
When seating an impression tray, which portion of the tray is usually seated first
posterior
_________is the characteristic of reversible hydrocolloids whereby they do not melt and gel at the same room temperature
Hysteresis
Warm water will cause an alginate impression to set up
faster
Which of the following instructions for mixing alginate impression material would be true:
A. pour water into powder
B. mix gently at first to incorporate powder into water
C.strop material against the side of the bowl for approximately one minute.
D. all of the above
all of the above