Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
What is MFTA and what does it utilize
|
Long Range passive/active recieve capabilities: Multi-Function Towed Array utilizes PAFS (Passive Acoustic Functional Segment) and MFAFS (Mid Frequency Active Functional Segment.
|
|
What does SCFS Stand for and what does it do?
|
Surface CAUSS Functional Segment: Sonobouy Processor
:its a redetection sensor not initial detection sensor |
|
What is SQS-53C and what does it utilize
|
Hull Mounted Active/Passive array
Utilizes MFAFS/HPPFS(Mid Frequency active/Hull Passive Processing Functional Segment |
|
What are the 2 main sonobouys onboard
|
SCFS - Sonobuoy processor functional segment.
AN/SSQ-53 DIFAR: passive bearing only bouy AN/SSQ-62 DICASS: Active, range and bearing buoy. |
|
what is SVTT
|
MK32 surface vessel torpedo tubes
|
|
Where can we fire torpedoes from
|
-CIC (UCFS Console) remotely
-TSP (Torpedo setting panel in CSER3 annex) local/Remote -From the tubes themselves in an emergency |
|
What does our MK41 VLS do?
|
Vertical Launching System houses and launches vertical launch ASROC (VLA). VLA consists of a MK46 torpedo and a rocket booster
|
|
2 modes of the MK46 ASROC
|
Run out and No run out (RO/NRO)
|
|
2 modes of the MK 54
|
Directed and NonDirected (DI/NDI)
|
|
Max effective range of OTST
Max effective range of VLA |
3000 yds
18000yds |
|
Code name for WQC-2/2A
|
GERTRUDE
|
|
Code name for WQC-6
|
PROBE ALERT
|
|
General purpose of WQC-2/2A
|
2 way ship to sub and sub to ship voice and continuous wave communication set.
|
|
What does WQC-2/2A consist of
|
consist of 2 transducers (one high frequency and one low frequency transducer)
|
|
Where is the Transducer located
|
Sonar Dome
|
|
What does WQC-6 interface with?
General purpose of WQC-6 |
Interfaces with MFAFS
-a one way ship to sub comm set that generates encrypted signal pulses through the water as acoustic bursts using the hull array |
|
Describe the process of SVTT
|
.Contact gained on MFAFS
.Then sends the contact info to UCFS .UCFS operator sends fire control data to C&D via AWS which will then send an engagement order back to UCFS |
|
Once we are given an engagement order what do we do.
|
The UCFS operator will fire a MK46/54 with the MK32 SVTT in RO/DI Mode.
|
|
When are SVTT engagements only used for
|
used for urgent attacks (Contact pops up within 10kyds) and counterfires (in response to an enemy torpedo attack)
|
|
When would we fire a VLA
|
.Contact is gained on MFAFS
. then sends the contact info to UCFS .UCFS operator sends fire control data to C&D via AWS which then sends engagement order back to UCFS |
|
Once given an engagement order what happens
|
the UCFS operator will fire a VLA
|
|
what is MFTA
|
Multi Function Towed Array
|
|
what is the Array length of the MFTA
|
810 FT
|
|
what is the Cable length of the MFTA and the deployable cable lenght of the MFTA
|
5600 FT
5200 FT |
|
What is the range of the MK46 and MK 54 Torpedo
|
Fired from SVTT 3000 yds from ship
|
|
What is the range of a VLA rocket
|
fired when target is 3000 yds to 18000 yds from ship
|
|
how does USW interface with C&D
|
UCFS tracks passed to C&D via AWS
|
|
What is HAWKLINK
|
2 way encrypted communications helo to ship. contact data and communications data are passed over the link for helo employment
|