Crane Certification

Front 1

It is important that ____ understand all aspects of crane setup, site prep and site evaluation

Back 1

Crane operators

Front 2

The process that attempts to ID hazards and devise plans to overcome or eliminate all hazards which may interfere with crane operations is reflected in the ______

Back 2

Site analysis

Front 3

When in doubt of the surroundings at a crane site it is wise to consult with the ____ about the exact location of possible hazards

Back 3

Local utility company

Front 4

During transport and setup the ____ of a crane can break through the ground and cause damage

Back 4

wheels/crawlers

Front 5

When a signal person raps on his or her hard hat with their fist you should ______

Back 5

Use the main hoist

Front 6

Pinch point clearance ensures that no one will be inadvertently trapped or crushed and that ______

Back 6

clearance is provided for the crane as the lift is being conducted

Front 7

What will happen if the crane is not setup within 1% of level

Back 7

Crane stability will be negatively impacted

Front 8

Standby cranes must be inspected at least ___

Back 8

Semiannually

Front 9

When load rotation may be hazardous a ____ should be used

Back 9

tag line

Front 10

During lift operations what is the minimum clearance from overhead power lines rated at 60,000 volts

Back 10

15 ft

Front 11

The minimum clearance from overhead power lines rated at 345,000 volts for a crane in transit ___ feet

Back 11

16

Front 12

T/F Copies of load charts for crane operations can be obtained from OSHA

Back 12

False

Front 13

Measures and displays the weight of the load being hoisted

Back 13

load indicator

Front 14

Uses solenoid operated blocking and bypass valves

Back 14

selected controls lockout system

Front 15

Measures how far the boom is extended

Back 15

boom length sensor

Front 16

The travel distance on hand levers may not be more than ____ inches from neutral position on a two way lever

Back 16

14

Front 17

The force on hand levers may not be more than ____ pounds

Back 17

35

Front 18

No crane should be operated with a load that exceeds _____

Back 18

the limits on load charts

Front 19

Verifying the load weight and capacity of the crane is the responsibility of _____

Back 19

the crane operator

Front 20

When the crane is shutdown the boom should be lowered to a minimum angle of ____ degrees.

Back 20

60