Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
Swaged Joint
|
A connection in which the diameter of one of the pipes to be joined is expanded using a special tool is called a:
|
|
Outside Diameter (OD)
|
The distance between the outer walls of a pipe is referred to as the:
|
|
Halocarbon refrigerants
|
A class of refrigerants that includes most of the refrigerants used in residential and small commercial air conditioning systems:
|
|
Joint
|
A method of connection in which tightening of a theaded nut compresses a compression ring to seal the joint:
|
|
Annealed copper refrigeration (ACR)
|
Copper tubing made especially for refrigeration and HVAC work is called:
|
|
Tubing
|
Thin-wall pipe that can be easily bent is called:
|
|
Specifications
|
Documents that describe the quality of thee material and work required:
|
|
Insulation
|
A substance that retards the flow of heat is called:
|
|
Inside Diameter (ID)
|
Refers to the distance between the inner walls of the pipe:
|
|
Brazing
|
Means of joining metal using an alloy with a melting point higher than that of solder, but lower than that of the metals being joined:
|
|
Sweating
|
A method of joining pipe in which solder is applied to the joint and heated until the solder flows into the joint is called:
|
|
Flare fitting
|
A fitting in which one end of each tube to be joined is flared outward using a special tool is called a:
|
|
Annealing
|
The use of heat treating to soften metal is called:
|