• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/18

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

18 Cards in this Set

  • Front
  • Back
Describe Phase
Frequency Dependent Time Delay
What is the physical distance for he full wavelength of 2 kHz?
0.565 ft
What are the Basis Test Signals used for sounds system measurement (not jut for SIM)
Sine Wave
White Noise
Broadband Pulse, Shaped Noise
White Noise is
Equal energy per octave
What are the two most commonly use weighting curves for SPL Meters?
A & C
Phase correction is used?
To correct for time alignment issues
Name two side effects that may be seen by reducing the LF amplifier gain
Crossover point will shift, and possible phase misalignment
Name ways to model a standard room shape instead of placing vertex by vertex or extruding
a and B
What does the F6 key do in EASE
Saves and Applies
Why do we model most rooms in the negative-y axis
It is the way the speakers are facing when inserted
What is the command for cutting one face into two faces
Fixed cut
Which screen computes and displays the amplitude response of the measured system in the Time Domain
Delay Finder
The SIM II 2.0 Lab software is used primarily for what two applications?
Stand alone Measurement and Research
In the DATA STATUS PANEL< NOT will only show how many characters from the NOTEPAD
10
Data Rejected in the Overall Status Panel means
Overload
In Delay Finder, what is the HotKey for the AutoKey for the Autoset Delay
F3
In Delay Finder, what does the lower screen display compared to the upper screen
10 time magnification of the spectrum screen
What does MLS stand for?
Maximum Length Sequence