Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
207 Cards in this Set
- Front
- Back
|
Who is responsible for the management of all aspects of the Maintenance Data System (MDS) to include Naval Aviation Logistics Command Management Information System (NALCOMIS) reports/inquiries at the activity level?
|
System Administrator/Analyst (SA/A)
|
|
|
How many System Administrators (SAs) must OMA NALCOMIS Optimized squadrons attend the NALCOMIS OOMA System Administrator course?
|
2
|
|
|
Which instruction provides the standardized policy and procedures for Aviation Logistics Information Management and Support (ALIMS) operations?
|
MCO 2020.1
|
|
|
How many hours prior to the aircraft's initial launch should fuel samples be taken?
|
24 hours
|
|
|
What is the Aircraft Inspection and Acceptance Record form number?
|
CNAF 4790/141
|
|
|
What is defined as an operational evolution where an aircraft is refueled while the engine is operating? |
Hot refueling
|
|
|
What are required to determine whether the airframe, power plant, accessories, and equipment are functioning per predetermined standards while subjected to the intended operating environment?
|
Functional Check Flights (FCFs)
|
|
|
Functional Check Flights (FCFs) are required when an aircraft is returned to flight status that has not flown in how many or more days?
|
30 days
|
|
|
Pilots and crew members performing FCFs shall be qualified per the applicable aircraft Naval Air Training and Operating Procedures Standardization (NATOPS) manual as well as which other instruction?
|
OPNAVINST 3710.7
|
|
|
How many months at a minimum must completed FCF checklists be retained in the aircraft maintenance file?
|
6 months
|
|
|
Who determines when an aircraft will be placed into preservation?
|
Maintenance Officer (MO)
|
|
|
What will be used to apply preservation for aircrafts not having preservation Maintenance Requirement Cards (MRCs)
|
NAVAiR 15-01-500
|
|
|
How many hours is the daily inspection valid for commencing from the date and time the inspection is completed provided no flight occurs during this period and no maintenance other than servicing has been performed?
|
72 hours
|
|
|
How many hours is the turnaround inspection valid for commencing from the date and time the inspection is completed provided no flight occurs during this period and no maintenance other than servicing has been performed?
|
24 hours
|
|
|
Which type of inspection is conducted between flights to ensure the integrity of the aircraft for flight, verify proper servicing, and to detect degradation that may have occurred during the previous flight?
|
Turnaround
|
|
|
Which type of inspection is a general inspection of a specific area of an aircraft?
|
Zonal
|
|
|
An acceptance inspection must be performed when a reporting custodian accepts an Aircraft Transfer Order (ATO) aircraft under which XRAY action codes?
|
G and R
|
|
|
What is the Monthly Flight Summary form number?
|
CNAV 4790/21A
|
|
|
What is the Equipment Operating Record form number?
|
CNAF 4790/31A
|
|
|
Aircraft will require a complete transfer inspection before transferring the aircraft to another reporting custodian that were originally planned for short-term transfer, but due to operational or Test Evaluation (TE) requirements exceed how many days?
|
90 days
|
|
|
OPNAVINST 3110.11 requires an Aircraft Service Period Adjustment (ASPA) evaluation between 6 months prior to and how many months after Period End Date (PED) of each Aircraft Service Period Adjustment (ASPA) aircraft to determine its general material condition relative to established induction criteria?
|
3
|
|
|
No more than how many months should elapse between the Aircraft Service Period Adjustment (ASPA) inspection and the resulting adjusted Period End Date (PED)?
|
18
|
|
|
Up to what percent of the total complement can be simultaneously scheduled for Aircraft Service Period Adjustment (ASPA) evaluations for those activities with complements of over 30 aircrafts?
|
10%
|
|
|
OPNAVINST 3110.11 requires rework induction not later than how many days after the current Period End Date (PED) when the Aircraft Service Period Adjustment (ASPA) evaluation determines that aircraft general material condition satisfies rework induction criteria?
|
90 days
|
|
|
Which type of defect constitutes a hazard to airworthiness and the condition is such that correction action is required prior to release of the aircraft for flight?
|
Critical
|
|
|
Which type of defect materially reduces the use of the unit or part for its intended purpose?
|
Major
|
|
|
Which type of defect does not materially reduce the use of the unit or part for its intended purpose?
|
Minor
|
|
|
How many days of advance notice is required prior to sending an aircraft to the AMARC for storage?
|
10 days
|
|
|
Which maintenance concept divides the total scheduled maintenance requirements into small packages or phases that are accomplished sequentially at specified intervals?
|
Phase
|
|
|
Engines with major inspection intervals of 400 or more hours will have major inspections performed if what percent or less of the interval remains until the next inspection?
|
25%
|
|
|
What is the Supporting Equipment Transaction Report form number?
|
CNAF 4790/64
|
|
|
What is used to record acceptance information, custody and transfer, rework, preservation and DE-preservation, Technical Directives (TDs), and any other miscellaneous history required to accompany the Support Equipment (SE) throughout its service life?
|
CNAF 4790/51
|
|
|
Which series of manuals contains the scheduled maintenance requirements for aircraft and man-mounted equipment?
|
NAVAIR 13-1-6
|
|
|
What provides scheduled control of the predictable maintenance workload?
|
Monthly Maintenance Plan (MMP)
|
|
|
Who is responsible for preparing and publishing the Monthly Maintenance Plan (MMP)?
|
Maintenance Material Control Officer (MMCO)
|
|
|
What was designed to provide operating units with a sufficient number of safe, reliable, mission capable aircraft to perform their assigned mission?
|
Standard re work
|
|
|
What is the Standard Depot Level Maintenance Special Work Request form number?
|
CNAF 4790/65
|
|
|
What was designed to protect the material condition of aircrafts which are not expected to be flown for extended periods of time?
|
Aircraft preservation
|
|
|
Who is responsible for determining when an aircraft is required to be placed into preservation?
|
Maintenance Officer (MO)
|
|
|
Aircraft systems will be exercised once every how many days (+/- 3 days) using applicable Maintenance Instructions Manuals (MIMs) when they; don't have specific T/M/S operational system check Maintenance Requirement Cards (MRCs)?
|
28
|
|
|
Which category of Support Equipment (SE)/Armament Weapons Support Equipment (AWSE)/Weapons Handling Equipment (WHE) is anticipated to be used within the next 90 days?
|
Category A
|
|
|
Which category of Support Equipment (SE)/ Armament Weapons Support Equipment (AWSE)/Weapons Handling Equipment(WHE) could possibly be used within the next 180 days?
|
Category B
|
|
|
Which category of Support Equipment (SW)/Armament Weapons Support Equipment (AWSE)/Weapons Handling Equipment (WHE) won't be needed for extremely long periods of time as in over at least 180 days?
|
Category C
|
|
|
Support Equipment (SE) falling under which preservation categories should be removed from the Maintenance Requirement Card (MRC) inspection?
|
Category B or C
|
|
|
What directs the work performed on preserved aircraft/Armament Weapons Support Equipment (AWSE)/Weapons Handling Equipment (MHE)?
|
Maintenance Control
|
|
|
Which series contains instructions for using the material priority system and for assigning Force Activity Designators (FADs)?
|
OPNAVINST 4614.1
|
|
|
Which project code is assigned by the Intermediate Maintenance Activity (IMA) when requisitioning material to repair Support Equipment (SE) that is inoperative and a workaround, redundancy, or local backup is available?
|
BK0
|
|
|
How often at a minimum must validation of Awaiting Parts (AWP) items using the Awaiting Parts list provided by the aviation support division be performed jointly with the Awaiting Parts (AWP) unit?
|
Weekly
|
|
|
What performs maintenance of logs and records and Configuration Management (CM) Auto Log Set (ALS)?
|
Production Control
|
|
|
Who will be established in I-level activities to monitor, control and apply the Maintenance Data System (MDS) within the activity?
|
Maintenance Database Administrator/Analyst (MDBA/A)
|
|
|
Which type of Intermediate Maintenance Activity (IMA) Support Equipment (SE) report occurs when there is an item of inoperative Support Equipment (SE) and there is no redundancy in that piece of Support Equipment (SE), or the redundancy is inadequate such that aircraft support will be impacted, thereby, jeopardizing the operational readiness of supported units? |
Broad Arrow (BA)
|
|
|
What is defined as the overhaul, repair, check, test, certification, modification, or manufacturing of aeronautical material, mission equipment, engines, and Support Equipment (SE)?
|
Component Repair
|
|
|
Which codes specify if a component is intended to be repaired at the O, I, or D level maintenance level?
|
Source, Maintenance, and Recoverability codes (SM&R)
|
|
|
How often at a minimum must Intermediate Maintenance Activities (IMAs) conduct Individual Component Repair List (ICRL) capability and Beyond Capability of Maintenance (BCM) reviews?
|
Monthly
|
|
|
Which centers are the contact points within maintenance organizations where requirements for indirect material are coordinated with the Aviation Support Division (ASD)?
|
Material Control
|
|
|
Within how many months of assuming the position must the O-level Material Control Supervisor attend the Financial Management for Naval Aviation Operating Target Accounting Course? |
6 month
|
|
|
Which instruction contains responsibilities and procedures for establishing, maintaining, and modifying the Naval Supply (NAVSUP) WSS Consolidated Remain in Place List (CRIPL)?
|
OPNAVINST 4440.25W
|
|
|
Within how many hours of receipt must Material control turn in defective repairable Consolidated Remain in Place List (CRIPL) components?
|
24 hours
|
|
|
Which website provides preservation and packaging requirements for specific repairable components?
|
P700-CNP
|
|
|
Which type of items are all solid state electronic components and assemblies containing such components considered to be?
|
Electrostatic Discharge Sensitive (ESD)
|
|
|
What is responsible for internal and external preservation (prior to packing) of all components?
|
Intermediate Maintenance Activity (IMA)
|
|
|
How often is an Operations maintenance, Navy (O&MN) appropriation enacted by Congress?
|
Annually
|
|
|
What finances Aviation Depot Level Repairables (AVDLRs)?
|
Navy Working Capital Fund (NWCF)
|
|
|
Which funds will be used to finance paints, wiping rags, towel service, cleaning agents, and cutting compounds used in preventive maintenance and corrosion control of aircraft?
|
Aviation Fleet Maintenance (AFM)
|
|
|
What must be established by each ship, aviation squadron, and command to record Operating Target (OPTAR) grants and the value of transactions authorized to be incurred as chargeable to the Aircraft Controlling Custodian (ACC)/Type Commander (TYCOM) operating budget?
|
NAVCOMPT 2155
|
|
|
What is the Operating Target (OPTAR) Document Transmittal Report form number?
|
NAVCOMPT 2156
|
|
|
How often must the Summary Filled Order/Expenditure Difference Listing (SFOEDL) be forwarded by the Defense Finance and Accounting Service (DFAS) to individual Operating Target (OPTAR) holders for each Operating Target (OPTAR) held?
|
Monthly
|
|
|
How often will Defense Finance and Accounting Service (DFAS) forward an Age Unfilled Order Listing (AUOL) to individual Operating Target (OPTAR) holders for each Operating Target (OPTAR) held?
|
Quarterly
|
|
|
Age Unfilled Order Listings (AUOLS) list all unfilled orders held in Defense Finance and Accounting Service (DFAS) files over how many days old which have not matched with related expenditure documents and have not been cancelled?
|
120 days
|
|
|
How often will Defense Finance and Accounting Service (DFAS) forward an unmatched expenditure listing to individual Operating Target (OPTAR) holders?
|
Quarterly
|
|
|
Which NAVSUP publication contains detailed flight packet information?
|
NAVSUP P-485
|
|
|
What are all components received in the Repairable Material Section (RMS) Supply Screening Unit (SSU) from O or I level maintenance units processed through to determine whether the component is within the check, test, or repair capability of the Intermediate Maintenance Activity (IMA)?
|
Aeronautical Material Screening Unit (AMSU)
|
|
|
Which program provides the required data for the effective management of Support Equipment (SE) at all levels of aircraft maintenance?
|
Aircraft Maintenance Material Readiness List (AMMRL)
|
|
|
What are used to establish a formal, continuous chain of accountability for specific equipment and material installed on or designated for use on any aircraft of a specified T/M/S?
|
Aircraft Inventory Records (AIR)
|
|
|
Who is the sole authority for changes and revision of Aircraft Inventory records (AIRs)?
|
Commander, Naval Air Systems Command (COMNAVAIRSYSCOM)
|
|
|
Which form must be prepared prior to transfer listing all missing Aircraft Inventory Record (AIR) and Mission Essential Subsystems Matrix (MESM) related items?
|
CNAF 4790/112
|
|
|
Within how many days must the receiving organization itemize shortages and submit a list of such shortages to the organization from which the aircraft was received after receiving an aircraft and discovering shortages upon receipt that are not properly recorded in the Aircraft Inventory Record(AIR)?
|
10
|
|
|
What is the Aircraft Inventory Record (AIR) form number
|
CNAF 4790/110
|
|
|
Which department is responsible for providing NCTSS IT21 Optimized OMA NALCOMIS support for tenant fleet aircraft and reserve squadrons?
|
Combat Information Systems
|
|
|
How many parts is the Navy Aeronautical Publications Index made up of?
|
4
|
|
|
What are used as guides in establishing Individual Material Readiness Lists (IMRLs)?
|
Allowance Lists
|
|
|
What is a list of all aviation peculiar items authorized to be carried in stock by activities for support of aircraft and missiles?
|
Aviation Consolidated Allowance List (AVCAL)
|
|
|
What are listening of equipment and material required for performance of specific missions?
|
Table of Basic Allowances (TBAs)
|
|
|
Which list specifies all maintenance significant repair parts associated with the equipment and is the basis for allowances?
|
Allowance Parts List (APL)
|
|
|
Which list describes a system supported by an authorized range of operating space items?
|
Allowance Equipment List (AEL)
|
|
|
Which Manual provides functional procurement, receipt, expenditure, inventory and financial management procedures, and some policies for all Marine Aviation Logistic Squadrons (MALS) using the Shipboard Uniform Automated Data Processing System (SUADPS)/Real Time (RT) and NALCOMIS Phase II and beyond?
|
MCO P 4400.177
|
|
|
Which procedure is required when Navy property and Defense Logistics Agency (DLA) material in Navy custody is lost, damaged, or destroyed?
|
Survey
|
|
|
Which form will be used in connection with survey procedures?
|
Financial Liability Investigation of Property Loss (DD form 200)
|
|
|
Which instruction should be referred to for reporting procedures for those activities with reportable engines?
|
NAVAIRINST 13700.15
|
|
|
How many years are logbooks/records of aircraft/equipment lost in combat or that have been involved in a mishap resulting in death, missing in action, personal injury, or substantial damage to other than government property retained by the operating activity before being forwarded to the Washington National Records Center?
|
1 year
|
|
|
Which reference contains procedures for transferring records to the Washington National Records Center?
|
SECNAV M-5210.1
|
|
|
Which reference provides guidance for shipping classified information to the Washington National Records Center?
|
SECNAV M-5510.30
|
|
|
Which form is used to monitor structural life limited components designated for D-level replacement which do not require Scheduled Removal Component (SRC) or Assembly Service Record (ASR) documentation?
|
Structural Life Limits (CNAF 4790/142)
|
|
|
Which form is designed to permit the monthly compilation of significant flight operational data throughout the service life of an aircraft?
|
Monthly Flight Summary (CNAF 4790/21A)
|
|
|
Which form provides a record of all scheduled and conditional inspections performed on the aircraft during each period and on equipment for which an Aeronautical Equipment Service Record (AESR) is required?
|
Inspection Record (CNAF 4790/22A)
|
|
|
O-level activities maintaining helicopter dynamic components requiring an Aeronautical Equipment Service Record (AESR) are not required to log repetitive Nondestructive Inspections (NDIs) based on less than how many hour intervals?
|
100 hours
|
|
|
Which form contains a complete record of all repair, reconditioning, standard rework, conversion, modification, modernization, and Aircraft Service Period Adjustment (ASPA) inspections performed on the aircraft by a repair activity or on the equipment by an I-level or D-level activity?
|
Repair/Rework Record (CNAF 4790/23A)
|
|
|
Which form contains a record of Technical Directives (TDs) affecting the airframe structure and its integral parts?
|
Technical Directives (CNAF 4790/24A)
|
|
|
Which form is used to record significant information affecting the aircraft for which no other space is provided in the logbook?
|
Miscellaneous/History (CNAF 4790/25A)
|
|
|
An entry in which form is required whenever preservation, RE-Preservation, or DE-Preservation is performed on aircraft or equipment?
|
Preservation/DE preservation Record (CNAF 4790/136A
|
|
|
Which publication should be referred to for aircraft preservation requirements if they are not contained in the applicable preservation Maintenance Requirement Cards (MRCs) for the selected aircraft?
|
NAVAIR 15-01-500
|
|
|
Which form is used to maintain a current inventory of all equipment, components, and assemblies requiring a Module Service Record (MSR), Assembly Service Record (ASR), HER, or Scheduled Removal Component (SRC) card?
|
Inventory Record (CNAF 4790/27A)
|
|
|
Who is responsible for screening engine Module Service Record (MSR), Assembly Service Record (ASR), HER or Scheduled Removal Component (SRC) cards upon receipt of an engine to verify the time remaining on engine components?
|
Logbook Clerk
|
|
|
Which record is designed to provide the current configuration and inspection record of a parachute assembly and its components?
|
Parachute Record (OPNAV 4790/101)
|
|
|
Which record is designed to provide configuration and inspection information for a Seat Survival Kit (SSK) and its components?
|
Seat Survival Kit Record (OPNAV 4790/137)
|
|
|
Which record is deigned to provide a current configuration and inspection record of Aviation Life Support Systems (ASLL) components, kits, and assemblies?
|
Aircrew Systems Records (OPNAV 4790/138)
|
|
|
Which record is designed to provide a record of the current configuration of all personal survival equipment issued to the aircrew man?
|
Aircrew Personal Equipment Record (OPNAV 4790/159)
|
|
|
Which form is intended for use with all aeronautical equipment requiring the monthly compilation of significant operating data?
|
Equipment Operating Record (CNAF 4790/31A)
|
|
|
Which publication contains the maximum ground test stand/engine test cell time a propeller may accumulate? |
NAVAIR 03/20CBBK-1
|
|
|
What is the Assembly Service Record form number? |
CNAF 4790/106A
|
|
|
Which form provides a method of monitoring specific maintenance data on designated components and equipment that do not qualify for a Scheduled Removal Component (SRC) card?
|
Equipment History Record (EHR) Card (CNAF 4790/113)
|
|
|
What is the Scheduled Removal Component Card form number?
|
CNAF 4790/28A
|
|
|
What contains the electronic baseline, actual inventory, and historical information on aircraft, engines, Support Equipment (SE), Aviation Life Support Systems (ALSS), and associated assemblies?
|
Configuration Management (CM) Auto Log Set (ALS)
|
|
|
Which type of inspections are conducted as a result of a specific over limit condition or as a result of circumstances or events which create an administrative requirement for an inspection?
|
Conditional
|
|
|
Which type of inventory are explosive devices treated as?
|
Component
|
|
|
Which type of engine design allows I-level activities to readily remove and replace interchangeable modules with Ready for Issue (RFI) spares? |
Modular
|
|
|
NAVAIRINST 13120.1 along with which other instruction provide policy for management of the Structural Life Limit Program?
|
NAVAIRINST 13130.1
|
|
|
What is used to record maintenance history for repairable components not designated as life limited?
|
Tracked Component Record (TCR)Whic
|
|
|
h system provides the Offices of the Secretary of Defense, the Department of the Navy (DON), and subordinate commands with comprehensive information on Navy and Marine Corps aircraft?
|
Aircraft Inventory and Readiness Reporting System (AIRRS)
|
|
|
What is the primary means of recording aircraft status changes, from acceptance into the inventory until final strike?
|
XRAY
|
|
|
Which instruction lists the Operating Service Life (OSL) which represents the total Operating Service Months (OPSERMOS) the aircraft can be expected to serve before retirement?
|
OPNAVINST 3110.11
|
|
|
What is a subset of the aircraft Standard Depot Level Maintenance (SDLM) specification which establishes inspection procedures to determine an individual aircraft's material condition prior to induction to or a 12 month deferral of Standard Depot Level Maintenance (SDLM)? |
Aircraft Service Period Adjustment (ASPA)
|
|
|
How many steps are required to add aircraft to the Naval inventory?
|
2 steps
|
|
|
Who maintains and controls a master bureau number log to ensure that once a Bureau Number (BUNO) is assigned it is not reassigned?
|
Chief of Naval Operations (CNO)
|
|
|
Who is responsible for maintaining records and acting as the reporting custodian when Naval aircraft are loaned to non-Naval activities?
|
Commander, Naval Air Systems Command (COMNAVAIRSYSCOM)
|
|
|
How often will the Chief of Naval Operations (CNO) approve a list of aircraft strikes?
|
Semi-annually
|
|
|
How many categories are there in which to declare an aircraft strike?
|
4
|
|
|
Which strike category via XRAY will be used by reporting custodians if an aircraft is lost (not recovered) or destroyed?
|
Category 1
|
|
|
Which strike category covers obsolescent or excess aircraft and aircrafts intentionally destroyed in tests, training or battle?
|
Category 3
|
|
|
What is the controlling custodian for pre-accepted aircraft?
|
NAVAIR ACC
|
|
|
How often at a minimum are reporting custodians required to report aircraft hours in life?
|
Quarterly
|
|
|
Which system provides material in support of the operation and maintenance of aeronautical equipment?
|
Navy Supply System
|
|
|
What is assigned by the Uniform Material Movement and Issue Priority System (UMMIPS) to all Navy establishment activities for determining priorities for material support?
|
Force Activity Designator (FAD)Which
|
|
|
instruction contains instructions for using the material priority system and for assigning Force Activity Designators (FADs)?
|
OPNAVINST 4614.1
|
|
|
How often at a minimum must meetings be held between Supply, O and I level maintenance representatives, and unit Quality Assurance (QA) NAVDRP personnel to discuss Not Mission Capable Supply (NMCS), Partial mission Capable Supply (PMCS), Engineering Investigation (EI)/Product Quality Deficiency Report (PQDR) exhibits, and other high priority related requirements?
|
Weekly
|
|
|
How often at a minimum must meetings be held between Supply, O and I level maintenance representatives to resolve problems, establish local procedures, and to promote material support effectiveness?
|
Monthly
|
|
|
Which program was established at Navy Inventory Control Points (ICPs) to standardize previously existing programs for intensive management of high cost, critical aviation and shipboard repairable items?
|
Intensive Repairable Item Management (IRIM)
|
|
|
Which fund has the Department of Defense Comptroller approved Aviation Depot Level Repairable (AVDLR) financing through?
|
Navy Working Capital Fund (NWCF)
|
|
|
Which publication contains complete Advanced Traceability and Control (ATAC) procedures as well as exceptions to the program?
|
NAVSUP P-485
|
|
|
What will be used for shipping Engineering Investigation (EI) and Product Quality Deficiency Report (PQDR) exhibits?
|
Joint Deficiency Reporting System (JDRS)
|
|
|
The maintenance department must review Source, Maintenance, and Recoverability (SM&R) codes for accuracy and adequacy using the standard Individual Component Repair List (ICRL) and request changes per which instruction?
|
NAVSUPINST 4423.29
|
|
|
What is the highest tactical aviation command in the Fleet Marine Force (FMF)?
|
Marine Aircraft Wing (MAW)
|
|
|
What is the smallest aviation unit designed for relatively independent operations with no outside assistance except access to a source of supply?
|
Marine Aircraft Group (MAG)
|
|
|
Which system can be used via message by afloat Supply Departments using shipboard communication facilities to transmit requisitions?
|
Streamlined Automated Logistics Transmission System (SALTS)
|
|
|
What is a procedure where all supply action documents in support of maintenance are entered and merged with the material reporting history file for reporting to COMNAVAIRSYSCOM?
|
Material Reporting
|
|
|
What is used to identify each type of supply action document?
|
RECTYPE
|
|
|
Where is weapon system costing accomplished?
|
Naval Supply Weapon Systems Support (NAVSUP WSS)
|
|
|
What is the process of determining the range and quantity of items that are required to support and maintain an end item of material for an initial period of service?
|
Provisioning
|
|
|
Which codes are used to communicate maintenance and supply instructions?
|
Source, Maintenance, and Recoverability (SM&R)
|
|
|
Which system is the authorized medium for directing and accomplishment and recording of modifications and one-time inspections of equipment?
|
Technical Directive Status Accounting (TDSA)
|
|
|
Which purpose codes will be used to identify an operating site's fixed allowance material?
|
W and L
|
|
|
How often are Naval Supply Weapon Systems Support (NAVSUP WSS) controlled material allowances adjusted by Naval Supply Weapon Systems Support (NAVSUP WSS) for transaction Item Report (TIR) activities?
|
Quarterly
|
|
|
Preliminary allowance documents are initially provided to air station Supply departments by Naval Supply Weapon Systems Support (NAVSUP WSS) as well as every how many years thereafter?
|
2 years
|
|
|
Which instruction contains detailed Operational Support Inventory (OSI) and Shore Consolidated Allowance List (SHORCAL) policy and procedures?
|
NAVICPINST 4441.16
|
|
|
Every how many months at a minimum must Marine Aircraft Group (MAG) Aviation Consolidated Allowance Lists (AVCALs) be reviewed and revised?
|
36 months
|
|
|
Which instruction contains detailed Operational Support Inventory (OSI) and Aviation Consolidated Allowance List (AVCAL) policy and procedures?
|
NAVICPINST 4441.15
|
|
|
Which instruction governs aeronautical material outfitting and supply support of the operating forces?
|
OPNAVINST 4441.12
|
|
|
What were established and maintained to provide a retail outlet for non-technical supplies of an administrative and housekeeping nature?
|
SERVMARTs and MINIMARTs
|
|
|
Which type of material are items having a unit of issued greater than the unit of applications categorized as?
|
Indirect
|
|
|
What is designed to provide users with the name, address, and socioeconomic data on all manufacturers and non-manufacturers doing business with the federal government?
|
H4/H8
|
|
|
How many different types of organizations are addressed in H4/H8?
|
3
|
|
|
Which publication establishes policies for the operation and management of afloat supply departments and shore based unites of the fleet operating forces under afloat procedures?
|
NAVSUP P-485 VOL 1
|
|
|
Which publication lists current publications, directives, and forms used through the navy that have stock numbers assigned?
|
NAVICP P-2003
|
|
|
What instruction provides information to assist users in managing hazardous materials to minimize the risk involved in performance of various jobs?
|
DODINST 6050.05
|
|
|
Which publication promulgates policy and procedures for the management of aircraft tires and tubes?
|
NAVAIR 04-10-506
|
|
|
Which publication contains information related to, and procedures for, maintaining Operating Targets (OPTARs) and defines terms used in the resources management system pertaining to activities, ships, and squadrons?
|
NAVSO P-3013-1
|
|
|
What are listings of the equipment and material that is required for performance of specific missions?
|
Table of Basic Allowances (TBAs)
|
|
|
What specifies all maintenance significant repair parts associated with the equipment and is the basis for allowances?
|
Allowance Parts List (APL)
|
|
|
How many different types of equipment lists are currently originated by Naval Supply Weapon Systems Support (NAVSUP WSS)?
|
3
|
|
|
What lists repairable assemblies, supporting repair parts, attaching parts, loose equipment, and accessories used on various aircraft?
|
Weapons Equipment List (WEL)
|
|
|
Which publication serves as a handy reference for personnel responsible for originating and processing MILSTRIP/MILSTRAP documents and contains those common definitions, coding structures, and abbreviated code definitions used on a day-to-day basis?
|
NAVSUP P-409
|
|
|
Which manual is applicable to all DOD activities in the reporting, redistribution, and use of excess, surplus, and foreign excess personal property? |
DOD 4160.21-M
|
|
|
Approximately how many line items stocked in GSA supply distribution facilities are listed in the GSA Federal Supply Catalog?
|
20,000
|
|
|
Which publication is the official naval guide for correspondence preparation?
|
SECNAVINST 5216.5
|
|
|
Which manual provides standard subject identification numbers for classifying correspondence, numbering instructions and notices, and assigning report symbols?
|
SECNAM M-5210.2
|
|
|
Which officer is the single point of contact for maintenance activities requiring direct supply support?
|
Aviation Support Division (ASD)
|
|
|
How many sections is the Aviation Support Division (ASD) composed of?
|
2
|
|
|
How often is the Awaiting Parts (AWP) status report provided to the intermediate Maintenance Activity (IMA)?
|
Daily
|
|
|
What is a detailed statement of an I-level repair facility's component repair capability?
|
Individual Component Repair List (ICRL)
|
|
|
Which form must be prepared and submitted by air detachments to request material in support of helicopter maintenance from the host air capable ship?
|
DD 1348
|
|
|
What serves as the point of contact for satisfying maintenance material requirements?
|
Supply Response Section (SRS)
|
|
|
How many units is the Supply Response Section (SRS) divided into?
|
5
|
|
|
Which unit is under the functional control of the SRS and is responsible for processing and expediting high priority requisitions?
|
Program Management Unit (PMU)
|
|
|
What is responsible for ensuring research is performed on all requisitions received that fails initial system validation?
|
Technical Research Unit (TRU)
|
|
|
Which SRS unit is responsible for the pickup and delivery of all material to supported activities?
|
Material Delivery Unit (MDU)
|
|
|
What shortens the issue and accounting procedures for recurring issues of maintenance related materials?
|
Pre-expended Bin Unit (PEB)
|
|
|
The quantity of each item pre-expended will not exceed an estimated supply of how many days? |
30 days
|
|
|
Eligible items with a unit cost of what amount or under may be routinely established in pre-expended stocks?
|
$150
|
|
|
How often at a minimum must stock records be reviewed to ensure all items have sufficient usage to be retained in a pre-expended status and to correct any mixing of pre-expended items?
|
Quarterly
|
|
|
Which section is responsible for repairables management by accounting for repairable stored in LRCA storage areas, in the intermediate Maintenance Activity (IMA) repair cycle, and those being processed for shipment to designated Rework Points (DRPs)?
|
Component Control Section (CCS)
|
|
|
How many units is the Component Control Section (CCS) divided into?
|
4
|
|
|
Which CCS unit is responsible for maintaining control of repairable components in all phases of the repair cycle?
|
Document Control Unit (DCU)
|
|
|
What is responsible for the receipt, storage, issue, and accountability of repairable assets under the control of ASD?
|
Local Repair Cycle Asset Storage Unit (LRCA)
|
|
|
Which publication contains procedures for retrograding BCM repairables received from the IMA?
|
NAVSUP P-485
|
|
|
The foam in place packaging technique surrounds the repairable in a container with a bed of semi-rigid form that is applied as a liquid that expands how many times? |
200
|
|
|
Which form must be used to document the removal of a suspected defective component from a ship or surface craft scheduled for repair at a designated IMA?
|
OPNAV 4790/2K
|
|
|
Which system is the authorized means for directing accomplishment and documentation of modification or one-time inspections of equipment procured by COMNAVAIRSYSCOM?
|
Technical Directive (TD)
|
|
|
What is the Technical Directive (TD) kit shipment Report form number?
|
NAVAIR 13053/1
|
|
|
Which revolving fund funded by Congress finances the purchase and maintenance of stocks of common supply items required for support and operation of the Navy (expense type items)?
|
NWCF
|
|
|
What is the primary ICP responsible for material support of the Naval Aviation Program with respect to technical aviation material?
|
NAVSUP WSS
|
|
|
What are Fleet Readiness Centers (FRCs) not authorized to stock in the Navy Industrial Fund (NIF) retail store inventories?
|
AVDLRs
|
|
|
Which type of items are those ordered for as specific customer job order and in the quantities required for scheduled work based on a bill of material?
|
Direct Material Inventory (DMI)
|
|
|
Which automated data processing and information system was designed to enable FRC material managers to control the flow of material to appropriate store rooms?
|
NAVAIR Industrial Material Management System (NIMMS)
|
|
|
Which program is used to permit all government furnished material requirements of each commercial contractor to be properly processed by the government Supply System through a single Supply activity regardless of which DOD Supply activity is assigned inventory control responsibility?
|
Single Supply Support Control Point (SSSCP)
|
|
|
For cost effectiveness, rework contracts are developed to provide services in yearly increments of up to how many years?
|
5 years
|
|
|
Which program reviews all Integrated Logistics (ILS) elements to determine affordable overall support solutions?
|
BOSS III
|
|
|
Logistics Engineering Change Proposals (LECPs) are funded by the NWCF if the Return on Investment (ROI) is two to one over how many years?
|
10
|
