Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
What does the AT code 1 on the MAF mean?
|
Repair Not Authorized. BCM 1
|
|
What does the AT code 2 on the MAF mean?
|
Lack of Equipment, tools or facilities. BCM 2
|
|
What does the AT code 3 on the MAF mean?
|
Lack of technical skills. BCM 3
|
|
What does the AT code 4 on the MAF mean?
|
Lack of Parts. BCM 4
|
|
What does the AT code 5 on the MAF mean?
|
Fails Check and Test. BCM 5
|
|
What does the AT code 6 on the MAF mean?
|
Lack of Technical Data. BCM 6
|
|
What does the AT code 7 on the MAF mean?
|
Beyon Authorized Repair Depth. BCM 7
|
|
What does the AT code 8 on the MAF mean?
|
Administrative. BCM 8
|
|
What does the AT code 9 on the MAF mean?
|
Condemned. BCM 9
|
|
What does the AT code A on the MAF mean?
|
No repair required
|
|
What does the AT code B on the MAF mean?
|
Repair and Replacement of items such as attaching seals gaskets, packing, tubing, ets. The parts are not identified by a WUC.
|
|
What does the AT code C on the MAF mean?
|
Repair
|
|
What does the AT code D on the MAF mean?
|
Work Stoppage, Post and Predeployment and Inter-IMA support. D-action Used only when Trans Code is 31 or 32.
|
|
What does the AT code F on the MAF mean?
|
Failure of item undergoing Check and Test.
|
|
What does the AT code J on the MAF mean?
|
Calibrated, No adjustments required
|
|
What does the AT code K on the MAF mean?
|
Calibrated. Adjustments Required
|
|
What does the AT code L on the MAF mean?
|
Work Stoppage. Awaiting parts.
|
|
What does the AT code N on the MAF mean?
|
Work in Progress--Close out
|
|
What does the AT code P on the MAF mean?
|
Removed. Used when the item is removed and only the removal is to be accounted for.
|
|
What does the AT code Q on the MAF mean?
|
Installed. Only the installation action is to be accounted for.
|
|
What does the AT code R on the MAF mean?
|
Remove and Replace. The removed item must be identified by a WUC; for Trans Code 11 by an assisting w/c when primary w/c used AT code R, the items processed has to be '0'; Trans Codes 18 or 19 only when WUC items are time sensitive and require logbook entries; for Trans Codes 23 or 25.
|
|
What does the AT code S on the MAF mean?
|
Remove and Reinstall. Limited to Mal Codes 800, 804, and 811.
|
|
What does the AT code T on the MAF mean?
|
Removed and Replaced for Cannibalization.
|
|
What does the AT code Y on the MAF mean?
|
Troubleshooting
|
|
What does the AT code Z on the MAF mean?
|
Corrosion Treatment.
|
|
What does the AT code 0 on the MAF mean?
|
Record look phase man-hours for acceptance, transfer, special, conditional, major a/c and combined airframe and engine speial inspection...
|
|
The determination to use BCM 8 for excessive backlog is made by Who?
|
Jointlly by the maintenance and supply officers.
|
|
True or False.
BCM 8 requires SECNAV approval. |
False, it requires ACC/TYCOM approval.
|