Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
33 Cards in this Set
- Front
- Back
|
G00 |
Rapid Command |
|
|
G01 |
Linear Interpolation |
|
|
G02 |
Circular interpolation Clockwise |
|
|
G03 |
Circular interpolation Counterclockwise |
|
|
G04 |
Dwell Command |
|
|
G20 |
Inch Programming |
|
|
G21 |
Metric Programming |
|
|
M00 |
Program stop |
|
|
M01 |
Option Stop |
|
|
M03 |
Spindle on Clockwise |
|
|
M04 |
Spindle on Counterclockwise |
|
|
M05 |
Spindle stop |
|
|
M06 |
Tool change command (mill) |
|
|
M08 |
Coolant on |
|
|
M09 |
Coolant off |
|
|
G28 |
Send to machine home |
|
|
G41 |
Tool nose/cutter comp left |
|
|
G42 |
Tool nose/cutter comp right |
|
|
G40 |
Tool nose/cutter comp cancel |
|
|
G43 |
Tool length comp mill (h & t code agreement) |
|
|
G50 |
Rev limiter/speed limit (lathe) |
|
|
G54 |
Work offset |
|
|
G74 |
Left hand tap can cycle |
|
|
G76 |
Threading cycle |
|
|
G80 |
Cancels can cycle |
|
|
G81 |
Drill can cycle |
|
|
G83 |
Peck drill cycle (Q or I,J,K) |
|
|
G84 |
Tapping can cycle |
|
|
G90 |
Absolute values from work zero (mill) |
|
|
G91 |
Incremental positioning (mill) |
|
|
G94 |
Feed per minute (mill) |
|
|
G99 |
Feed per rev (lathe) reads ipr |
|
|
G97 |
Direct rpm (css off) |
