• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/24

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

24 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)

Under what circumstances would copper tubing be used in a brake system?

Under none

12-3 states never replace steel tubing with copper

When testing for leakage in a hydraulic brake system, you must depress and hold the brake for at least how many minutes?

1

12-3

NFELC maintenance bulletin #75 directs the naval Constructikn Force to use which fluid or materials?

Silicone Brake Fluid

11-3

T/F Brake drums that have been warn or machined past their discard diameter or thickness must not be used?

True

11-4

Which condition could indicate brake problems where none, in fact, exist.

Loose wheel Bearings


Worn front end parts


Low tire pressure

11-5

Which statement provides a good description of pedal reserve?

Distance from the pedal to the floorboard with the brakes applied.

11-9

Both rear brakes may drag as a result of which problem?

Frozen emergency brake cable

11-9

A brake drum that is cut to thin will cause which problem?

Soft brake pedal

11-9

After completing repairs to a brake system, you should take which action first?

Reset the brake failure warning light

11-10

On a brake power system with a vacuum booster, if the air valve sticks what will happen?

Brakes will fail to release

In a brake system that uses vacuum booster m, a hard pedal could indicate what?

Internal damage to the power booster

In a brake system amusing a vacuum booster, a hydraulic leak may not be seen for which reason?

Brake fluid evaporates,


Brake fluid collects in the power booster

11-14

On a vehicle using hydro boost power brake system, hydraulic pressure is created by what means?

Power steering pump

In the event of a hydro boost power brake system failure, the spring-loaded accumulator will provide for a total of how many power brake applications?

2

11-15

When the power steering belt brakes in a hydro boost power brake system, which situation will occur?

A high pedal effort will be felt

11-15

Excessive noise in a hydro boost power brake system could be caused by which problem?

Loose power steering belt

What is the normal accumulator pressure of a hydro boost power brake system, in psi?

1,400 PSI

The stopping distance of construction equipment and heavy trucks is greater due to what factor?

Increased weight of the vehicle,


Increased payload weight

11-16

An air brake system should build up to safe operating pressure In What maximum number of minutes?

10

11-16

You should check for inaudible air leaks by which means?

Soapy water and a brush while watching for bubbles

11-17

The automatic trailer brakes must hold a vehicle for how many minutes?

15

11-17

On construction equipment, the drive line brakes are usually mounted by which location?

Directly in the driveline

11-20

When compared to an emergency braking system that is interconnected with the rear service brakes, a drive line emergency braking system has a greater holding power for what reason?

Mulitiplication of the brake force through the final drive system

11-20

A parking brake that is interconnected with the service brake is usually found on what type of equipment?

Automotive

11-20