Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
58 Cards in this Set
- Front
- Back
In your work as a PW transportation
shop supervisor, you will come in contact with which of the following personnel? |
Mechanics
Military and civilian equipment operators Officers to whom you are responsible |
|
What statement best describes the
work of a public works transportation maintenance shop? |
Much of the work is of a
continuing nature |
|
Civil service personnel are
employed in a PW transportation shop for what purpose? |
To ensure continuity of service
|
|
the physical layout of a maintenance branch mechanic shop
may be found in which of the following NAVFAC publications? |
P-437
|
|
Respectively, the transportation
division director reports directly to what person in the chain of command? |
The public works officer
|
|
Within the maintenance branch, who
makes the final decision of individual personnel assignments? |
The public works officer
|
|
In planning equipment required for
the PW center, what person functions as a technical advisor? |
The transportation director
|
|
When the transportation director is
absent, who is in charge? |
The manager of the equipment
branch |
|
To maintain a balanced work flow,
which of the following individuals coordinates work with other activities and departments? |
The manager of the maintenance
branch |
|
The production control supervisor
is responsible for receiving, inspecting, and classifying all new and used equipment. This supervisor must also make which of the following determinations? |
The parts and tools needed to
support this equipment during its life cycle |
|
Who is responsible for scheduling
the work load for the various centers of the transportation department? |
The production control
supervisor |
|
The construction equipment shop
foreman has all except which of the following responsibilities? |
Issuing and enforcing safety
practices and fire regulations |
|
What is the most important phase of
preventive maintenance? |
Scheduled, periodic preventive
maintenance |
|
What is the first line of defense
against equipment wear, failure, and damage? |
Daily inspections by the
equipment operators |
|
Your maintenance shop has noted
that the operators are not properly performing daily PM on their equipment. To set up training periods, you should consult with whom? |
The equipment operation branch
foreman |
|
When a public works station is
short of personnel, what person is responsible for performing service station maintenance? |
The operator
|
|
Your personnel should inspect
vehicles for safety and serviceability at intervals not to exceed 12 months or what maximum number of miles? |
12,000 miles
|
|
When, if ever, should the safety
and serviceability inspections be performed at the same time? |
When it reduces downtime
|
|
Vehicle safety deficiencies were
discovered during a safety inspection. When should the deficiencies be corrected? |
Before the vehicle becomes
operational |
|
Unscheduled maintenance is limited
to those items reported or confirmed deficient by which of the following personnel? |
The operator
|
|
The cost control system provides a
means for comparing the actual performance of maintenance work on transportation equipment to the hourly standards established by what means? |
The equipment manufacturers and
the Naval Facilities Engineering Command |
|
In the cost control system, which
of the following costs are charged to allotments and appropriations? |
Indirect labor and material
costs of equipment maintenance and operations Direct labor and material costs of equipment maintenance and operations Costs of building maintenance, shop stores, and utilities |
|
Reports required by supervisors to
pinpoint deficient areas of operation are prepared by which of the following individuals? |
The accountable fiscal officer
|
|
T/F Transportation management reports
include data for comparing actual maintenance costs and standard maintenance costs. |
True
|
|
The extent of the services a PW
maintenance shop provides in maintaining, repairing, or overhauling an activity’s automotive equipment depends on which of the following factors? |
Economics
Distance of the activity from commercial repair shops Size of the activity |
|
T/F cost of repair services by the
preventive maintenance shop must be justified when the nature of the work is classified. |
False
|
|
Guidance for equipment preservation
is contained in what NAVFAC publication? |
P-434
|
|
The level of preservation to be
applied to construction equipment depends on which of the following factors? |
1. Information received as to how
the equipment is to be handled, shipped, and stored 2. Conditions to which the equipment will be subjected during its storage period before issue 3. Physical characteristics of the equipment |
|
Before applying preservatives to
CESE, which of the following actions must you take? |
Remove all corrosion and
contaminants |
|
What single cleaning method, if
any, is the best for all equipment? |
None
|
|
Steam cleaning is suitable for the
removal of which of the following substances? |
1. Tar
2. Heavy grease 3. Road deposits |
|
T/F Active storage equipment must be
operated for short periods of time at regular intervals to keep it in serviceable condition. |
True
|
|
When depreserving stored equipment
before it is operated, you should take all except which of the following actions? |
Remove preservatives with
abrasives |
|
In addition to safety inspection
regulations, what rule applies to vehicle inspection and servicing? |
Perform as prescribed by the
manufacturer |
|
At a public works department, the
PM schedule for a vehicle is determined by dividing the estimated miles and hours by what factor? |
The number of workdays per year
|
|
The emissions control devices
should be serviced at what maximum number of miles? |
12,000 miles
|
|
T/F Direct labor is the only factor to
be considered when maintaining a work load control board. |
True
|
|
Which of the following means may be
used by a maintenance shop to display the work load status effectively? |
A work load control board
|
|
When standard hours are compared
with actual man-hours, which of the following factors is indicated? |
Possible lack of training for
personnel |
|
A public works department may have
a contract repair parts supplier to increase availability. |
True
|
|
In an undermanned public works
station, the supervisor may need to take which of the following actions to keep up with the maintenance and repair schedule? |
1. Hire additional personnel
2. Use commercial contractors 3. Extend working hours |
|
In ordering work to be performed by
commercial contractors, you should use what form? |
DD Form 1155
|
|
After the inspector adds the labor
rate, contract number, order number, and accounting data, the shop repair order is forwarded to what person? |
The contracting officer
|
|
Upon completion of contract
repairs, what should the shop dispatcher do with the custody receipt? |
Destroy it
kill it Kill it with Fire |
|
The DD Form 1155 should be filed in
the equipment history jacket for what period of time? |
The life of the vehicle
|
|
The period of time a vehicle is
warranted is found in what document or publication? |
The procurement contract
|
|
Equipment deficiencies should be
noted on which of the following forms? |
SF 368
|
|
Procedures for submitting a quality
deficiency report for a special operating unit of the Naval Construction Force may be found in which of the following NAVFAC publications? |
P-404
|
|
T/F If action has been completed
correcting an equipment deficiency, a quality deficiency report is not required. |
False
|
|
Regardless of warranty coverage,
which of the following actions should you take with CESE that have design deficiencies affecting safe operation? |
Remove the CESE from service
immediately |
|
Warranty repairs are normally
completed by what means? |
A franchised dealer
|
|
The efficiency of a public works
activity is normally increased after a visit by a representatives from what activity? |
TEMC
|
|
Upon the departure of the visiting
TEMC representative, he or she will submit a report to what individual person? |
The commanding officer
|
|
For sites with more than 50 pieces
of CESE, transportation assistance visits are made at what intervals? |
Every 18 months
|
|
When disposal of CESE is requested,
you must submit what form to the cogizant TEMC? |
SF-120
|
|
When CESE is turned in to DRMO,
what is done with the vehicle history jacket? |
It is turned in to DRMO with
the equipment |
|
Special disposal instructions for
ambulances and dental vehicles are contained in which of the following NAVFAC publications? |
P-300
|
|
After a disposal action is
completed, what action, if any, should you take next? |
Adjust the inventory records
|