• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/53

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

53 Cards in this Set

  • Front
  • Back
Name the core competencies of the Cryptologic Technician Collection (CTR) rate.
Afloat Cryptologic Manager

Intermediate Signals Analyst

Advanced Signals Analyst

Basic Manual Morse Operator
BINARY
te simplest possible number system is the BINARY, or base 2, system.
DECIMAL
A number system based on units of 10.
OCTAL
The octal, or base 8, number system is a common system used with computers
HEXADECIMAL
The name is derived from the fact the system uses 16 symbols.
SIGNALS ANALYSIS
a cutting-edge technical discipline that seeks to recover, understand, and derive intelligence from foreign signals.
CRYPTANALYSIS
the analytic investigation of an information system with the goal of illuminating hidden aspects of that system.
TRAFFIC ANALYSIS
the study of the external characteristics of signals communications and related materials for the purpose of obtaining information concerning the organization and operation of a communication system.
FUSION ANALYSIS
- the process of examining all sources of intelligence and information to derive a complete assessment of activity
RASIN MANUAL
RAdio SIgnals Notation manual is used by the United States SIGINT System (USSS) as a guide to the Communications Intelligence (COMINT) signal classification system.
USSIDs
United States Signals Intelligence Directives, designed to contain the planning, doctrinal, tasking, and control material governing U.S. Signals Intelligence (SIGINT) operations throughout the world.
Line-Of-Site (LOS) communication
LOS communication is a signal that is simply transmitted directly from the transmitting antenna to the receiving antenna. Also, known as direct wave communications that follows the curvature of the earth limiting LOS to approximately 25 to 40 miles.
Doppler Effect
Refraction due to motion.

When a source is moving with respect to the observer, the frequency of a signal will appear to change.
D Layer
The innermost layer, 60 km to 90 km above the surface of the Earth
E Layer
A region of the ionosphere, extending from about 90 to 150 kilometers (55 to 95 miles) above the earth and influencing long-distance communications by strongly reflecting radio waves
F Layer
also known as the Appleton layer extends from about 121 km to more than 500 km above the surface of Earth. The F layer consists of one layer at night,
but during the day, the F layer separates into the F1 and F2 layer
responsible for most skywave propagation of radio waves, facilitating high frequency (HF, or shortwave) radio communications over long distances.
Morse Code
a method of transmitting textual information as a series of on-off tones, lights, or clicks that can be directly understood by a skilled listener or observer without special equipment.
Sampling and how it relates to Signals Collection
the collector cuts down the amount of data recorded without losing any of the actual information in the signal.
Direction Finding
the method of locating radio transmitters through the use of specially constructed receiving antennas and equipment.
GeoLocation
the identification of the real-world geographic location of an object, such as a cell phone or an Internet-connected computer terminal.
Define an Information Environment
The information environment is the aggregate of individuals, organizations, and systems that collect process and diseminate or act on information.
Discuss the three dimensions that make up an Information Environment
Physical: The real world environments of land, sea, air, and space. It is where individuals, organizations, information systems, and the physical networks that support them reside.

Informational: Consists of information and is where the functions of information systems

Cognitive: Where information is used to form perceptions and attitudes and make decisions.
Command and Control (C2)
The exercise of authority and direction by a properly designated commander over assigned and attached
forces in the accomplishment of the mission.
Offensive IO
Involves the integrated use of assigned and supporting capabilities and activities, mutually supported by intelligence, to affect adversary decision makers and achieve or promote specific objectives.
Defensive IO
ensure timely, accurate, and relevant information access while denying adversaries the opportunity to exploit friendly information and information systems for their own purposes.
CRISIS planning
The Joint Operation Planning and Execution System process involving the time-sensitive development of joint operation plans and operation orders for the deployment, employment, and sustainment of assigned and allocated forces and resources in response to an imminent crisis.
DELIBERATE planning
Planning in response to long standing strategic objectives or anticipated situations.
Center of Gravity
The source of power that provides moral or physical strength, freedom of action, or will to act.
Decisive Point
A geographic place, specific key event, critical factor, or function that, when acted upon, allows commanders to gain a marked advantage
Six phases of the targeting cycle
Commander’s Objectives, Guidance, and Intent

Target Development, Nomination, and Prioritization

Capabilities Analysis

Commanders decision and force assignment

Mission planning and force execution

Assessment
Hard kill(Kinetic)
Physical attack/destruction by delivery of munitions/ordinance to destroy or degrade a target.
Soft kill(Non-kinetic)
The temporary elimination, degradation, or interruption of a node, link, or system
Measures of Effectiveness (MOE)
Assess changes in system behavior, capability, or the operational environment.
Measures of Performance (MOP)
Criteria for measuring task performance or accomplishment. MOPs are generally quantitative, but also can apply qualitative attributes to task accomplishment
Who is overall in charge of a Non-combatant evacuation operation (NEO) and how are they conducted
Within the country, the Ambassador has been designated as the responsible authority for the operation.

Noncombatant evacuation operations (NEO) are conducted to assist the Department of State (DOS) in evacuating noncombatants and nonessential military personnel from locations in a foreign nation to an appropriate safe haven in the United States or overseas.
Define the Primary Mission Areas of Cryptologic Maintenance.
PCS Afloat
Fleet Electronic Support (FES)
Submarine Direct Support
Shore-based Mission Support
Mission performed by Cryptologic Maintenance
Cryptologic Technician Maintenance (CTM) offers a career in the installation, configuration, diagnosis, and repair of state-of-the-art electronic systems
The purpose of Tactical Cryptologic Systems (TCS).
Battle Damage Assessment and Counter-Command and Control Warfare
Describe Surface Direct Support and Fleet Electronic Support (FES).
SMEs, as needed, to support Cryptologic Carry-On Program (CCOP) Equipment
List the TCS Systems taught within the CID Domain.
SHIPS SIGNALS EXPLOITATION EQUIPMENT MAINTENANCE (INC ‘E’)

Tactical Exploitation System (TES) Maintenance

Combat Direction Finding (CDF) System Maintenance

CLUSTER SNOOP System Maintenance
Define the Maintenance Concept performed by Cryptologic Maintenance.
Organizational (O-level) and Depot (D-level).

Designed to sustain continuous operation with minimum maintenance at the O-level.
Define Preventive Maintenance.
Preventative

Alternative

Corrective

All to minimize downtime
Maintenance Requirement Card (MRC)
Provide detailed procedures for performing maintenance requirements and describes who, what, how, and with what resources a specific requirement will be accomplished.
Maintenance Index Page (MIP)
MIPs are prepared and issued for each installed system/equipment for which PMS support has been established. MIPs are basic PMS reference documents
List of Effective Pages (LOEP)
Provides a listing of the Maintenance Index Pages (MIPs) and system equipment not requiring PMS assigned to each Work Center.
Standard Parts and Materials Index Guide (SPMIG)
The SPMIG contains stock numbers for all SPINs required for use while conducting PMS checks.
Feedback Reports (FBR):

Category A
non-technical
Feedback Reports (FBR):

Category B
technical in nature
Feedback Reports (FBR):

Urgent
Safety related
Describe the purpose of a Casualty Report (CASREP).
Naval messages informing operational commanders of significant equipment malfunction which may result in the degradation of a unit’s readiness and are used to request parts and/or technical assistance from support personnel.
Define the four types of CASREP’s.
INITIAL

UPDATE

CORRECT

CANCEL
6 steps troubleshooting procedure foir Corrective Maintenance
Recognition
Elaboration
Listing probable faulty functions
Localizing the faulty function.
Localizing trouble to the circuit.
Analysis

(RELLCA)
Name the core competencies of the Cryptologic Technician Collection (CTR) rate.
Intermediate Signals Analyst

Advanced Signals Analyst

Basic Manual Morse Operator