Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
What command will show you the forward/filter table?
|
show mac address-table
|
|
If a destination MAC address is not in the forward/filter table, what will the switch do with the frame?
|
Flood the frame out all ports except the port it was received on.
|
|
What are the three switch functions at layer 2?
|
Address learning ; forward/filter decisions ; loop avoidance
|
|
If a frame is received on a switch port and the source MAC address is not in the forward/filter table, what will the switch do?
|
It will add the source MAC address in the forward/filter table and associate it with the port the frame was received on.
|
|
What is used at layer 2 to prevent switching loops?
|
Spanning Tree Protocol (STP)
|
|
802.1w is also called what?
|
Rapid Spanning Tree Protocol (RSTP)
|
|
When is STP considered to be converged?
|
When all ports in either the blocking or forwarding mode.
|
|
Switches break up __________ domains.
|
Collision
|
|
What is used to prevent switching loops in a network with redundant switched paths?
|
Spanning Tree Protocol (STP)
|
|
Which Cisco 802.1d extension stops BPDU from being transmitted out a port?
|
Portfast
|