Chapter 5, 6, 7 Test

Front 1

What tool can you use to view the System log?

Back 1

Event Viewer

Front 2

What do you boot into to repair the computer?

Back 2

Windows Recovery Environment (WinRE)

Front 3

You are manually configuring the paging file. What is the recommended size?

Back 3

1.5 times the size of RAM

Front 4

You suspect a hard drive may have some bad sectors. What should you use to verify this?

Back 4

Check Disk or chkdsk

Front 5

The system stops with a stop error indicating a memory failure. What should you do?

Back 5

Run the Memory Diagnostic.

Front 6

The system will not boot successfully. Each time it boots, it stops with a stop error. What can you do to resolve the problem?

Back 6

Implement Startup Repair.

Front 7

What command-prompt tool can you use to query and configure the status of services?

Back 7

SC (Service Control)

Front 8

What graphical user interface tool can you use to restart a service?

Back 8

The Services console

Front 9

You plan to update the BIOS. What is this called?

Back 9

Flashing the BIOS

Front 10

What tool can you use to check the current status of devices installed in the system?

Back 10

Device Manager

Front 11

You want desktop PCs in your enterprise to use the least amount of power while also being able to restart as quickly as possible. What mode should you enable?

Back 11

Sleep mode

Front 12

You want laptop PCs to use the least amount of power when they aren't being used. What mode should you enable?

Back 12

Hibernate mode

Front 13

You're having problems with a Windows 7 system. You want to modify the services and applications that start by default. What tool should you use?

Back 13

System Configuration (msconfig)

Front 14

What graphical user tool can you use to modify the BCD?

Back 14

System Configuration or Startup and Recovery settings page

Front 15

What permissions are required to install software?

Back 15

Local administrative permissions

Front 16

What can be used to verify the publisher of the software?

Back 16

Digital signature

Front 17

What can be used to verify that the integrity of software is not lost, such as through malware infection?

Back 17

Digital signature

Front 18

What tool can be used to disable or enable features such as Games on Windows 7?

Back 18

Windows Features (from Programs and Features in the Control Panel

Front 19

What can you use to remove access to Windows Features for end users?

Back 19

Group Policy

Front 20

What server product can be purchased to automate the deployment of applications?

Back 20

System Center Configuration Manager (SCCM)

Front 21

What format is needed to deploy applications with Group Policy?

Back 21

Microsoft Installer files (.msi)

Front 22

What can be applied to an application to modify the default installation?

Back 22

A transform (.mst) file

Front 23

What is a primary benefit of SCCM over Group Policy when deploying applications?

Back 23

Deployments can be scheduled.

Front 24

You have assigned an application to a user. How will it appear to the user?

Back 24

On the Start menu

Front 25

You have published an application to a user. How will it appear to the user?

Back 25

In the Control Panel, Programs menu

Front 26

What tool can be used to determine if DNS can resolve a hostname?

Back 26

NSLookup

Front 27

You use IPConfig and determine the IP address is 169.254.3.7. What is the likely problem?

Back 27

The DHCP server can't be reached or is out of IP addresses

Front 28

What tool can be used to determine what DNS server a client will use?

Back 28

IPConfig /all

Front 29

How can the DNS cache be cleared?

Back 29

IPConfig /FlushDNS

Front 30

How can one view the contents of the DNS cache?

Back 30

IPConfig /DisplayDNS

Front 31

A client must be configured to go through a router to access other subnets. What is this configuration called?

Back 31

Default gateway

Front 32

You want to release and refresh the client's DHCP lease. What command should you enter?

Back 32

IPConfig /release and IPConfig /renew

Front 33

A client has just connected to a wireless network at a coffee shop. How should the Network Type be configured?

Back 33

Public

Front 34

You are configuring a client within a small office that has a router used to access the Internet. How should the Network Type be configured?

Back 34

Private

Front 35

A client has a statically assigned IP address of 192.168.15.5 with a subnet mask of 255.255.255.0. What is a typical IP address for the default gateway?

Back 35

192.168.15.1

Front 36

What's the subnet mask for this address: 192.168.1.5/24?

Back 36

255.255.255.0

Front 37

You have entered the following command: Ping Server1. The output of Ping is "Ping Request Could Not Find Host." What is the problem?

Back 37

Name resolution (probably DNS)

Front 38

You have entered the following command: Ping Server1. The output of Ping is "Destination Host Unreachable." What is the likely problem?

Back 38

A routing problem (such as the default gateway is not reachable)

Front 39

You have entered the following command: Ping Client1. The output of Ping is "Request Timed Out," but you know Client1 is a Windows 7 computer that is up and operational on the same subnet. What is the problem?

Back 39

Windows Firewall is blocking ICMP

Front 40

How should the Network Type be configured for a computer connected to an open wireless network at an airport?

Back 40

Public

Front 41

After installing and running a legacy application, a Windows 7 system will no longer boot successfully. Instead, it stops with a boot error. What should you do? (Choose all that apply. Each answer is a complete solution.)

Back 41

Windows Update client,MBSA,WSUS,SCCM

Front 42

After installing and running a legacy application, a Windows 7 system will no longer boot successfully. Instead, it stops with a boot error. What should you do? (Choose all that apply. Each answer is a complete solution.)

Back 42

Choose Startup Repair from the WinRe.,Choose System Restore from the WinRe.,Choose Repair Your Computer from the Advanced Boot Options page.,Boot into Safe Mode and apply a Restore Point.

Front 43

You suspect that a disk drive is developing problems. You want to check the integrity of the drive including the boot sectors. What should you use?

Back 43

Check Disk

Front 44

You suspect the BCD store is corrupt. You have booted into the WinRE and selected the command prompt. What command can you use to rebuild the BCD?

Back 44

Bootrec /RebuildBCD

Front 45

You want to configure desktop PCs in your organization so that they will use as little power as possible when not used. You want to ensure that they can return to operation as quickly as possible, but you also want to ensure that the state of the computer is retained in the case of a power outage. What power mode should you use?

Back 45

Hybrid sleep

Front 46

You have installed a new driver for a video card on a system. Unfortunately, the video card no longer allows higher resolutions to be selected. What’s the easiest method to restore the original driver?

Back 46

Roll back the driver.

Front 47

An end user is unable to install an application. What is the likely reason?

Back 47

The user is not logged in as an administrator.

Front 48

You want to ensure that software you are preparing to install is from an identifiable source. What should you check?

Back 48

Digital signature

Front 49

You want to remove games on the local computer. What should you modify?

Back 49

Windows Programs and Features

Front 50

An application runs in Windows XP but not in Windows 7. What can you use to try to run the application in Windows 7?

Back 50

Application Compatibility mode

Front 51

An application that was previously working on a Windows 7 system has stopped. What Event Viewer log is likely to give you insight into the problem?

Back 51

Application

Front 52

An application that worked in Windows XP doesn’t work in Windows 7. What method(s) can you use to run the application on Windows 7 systems? (Choose all that apply.)

Back 52

Windows XP mode,Remote Desktop Services,Application Virtualization,Windows VPC

Front 53

Windows IP Configuration Host Name . . . . . . . . . . . . : Client1-PC

Back 53

A DHCP server can’t be reached.

Front 54

A user complains that she is no longer able to access a server named Server1, which is on a different subnet. She was able to access it yesterday. You try to ping the IP address of Server1 from her computer and get four successful replies. What is the likely problem?

Back 54

DNS

Front 55

A user is unable to connect to a server in the network. You suspect DNS may be the problem and want to verify that DNS has a record for the server. What tool should you use?

Back 55

NSLookup

Front 56

You discover that a Windows 7 system has a faulty DNS cache entry with a TTL of 600. You want to remove this entry from cache. What should you do?

Back 56

Use IPConfig /FlushDNS.

Front 57

You have used Ping to check the connectivity from a Windows 7 client to a server named Server1. The response is Destination Host Unreachable. You’ve verified that Server 1 is operational. What is the most likely problem?

Back 57

Default gateway is misconfigured.