Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
43 Cards in this Set
- Front
- Back
What is an oligomer? |
A short chain of monomers that is not long enough to be considered a polymer |
|
Oligomers are often referred to as _____. |
Prepolymer |
|
Oligomers have a consistency that is _____. |
Gel like |
|
The chemical family of urethanes is known for _____. |
High abrasion resistance and durability |
|
UV gels can be _____ to file. |
Easy |
|
Viscosity is a measurement of the _____. |
Thickness or thinness of a liquid |
|
What are the most common types / colors of resin used with UV gel applications? |
Clear, pink, and white |
|
Which type of UV gel is used to add more of an arch and curve to the fingernail? |
UV building gel |
|
Pigmented UV gels can be _____. |
Building gels or self-leveling gels. |
|
UV gel polish can have a _____ gel applied over then after curing. |
Gloss |
|
What are some common alternate terms for UV gloss gels? |
Sealing gels, Finishing gels, or shine gels |
|
Pink and white UV gels can be formulated in a variety of colors, viscosities, and _____. |
Opacities |
|
It is recommended that you use _____ brushes for UV gel application. |
Flat bristled |
|
It is recommended that you use a _____ abrasive for natural nail preparation during a UV gel application. |
Medium |
|
It is recommended that you use a _____ buffer for finishing work during a UV gel application. |
Fine |
|
If the client has flat fingernails, building will be easiest when done with a _____ UV building gel. |
Thicker |
|
If the client has fingernails that have an arch and curve, then a _____ gel is recommended. |
Self-leveling |
|
A UV lamp is also known as a _____. |
UV bulb |
|
What wattage is our standard of a UV lamp? |
6 watt, 7 watt, or 9 Watt |
|
UV light is found in sunlight, tanning lamps, and _____. |
Full-spectrum lamps |
|
The amount of UV light produced by a UV lamp is referred to in terms of _____. |
Intensity |
|
A typical UV lamp will stay blue for _____. |
Several years |
|
UV lamps must be changed _____. |
Two or three times a year |
|
The most common UV lamp on the market is the _____. |
9 watt lamp |
|
Soft UV gels are typically removed with _____. |
Acetone |
|
When performing the pre-service procedure, you generally must allow your implements to soak for _____ in the disinfection container. |
10 minutes |
|
When preparing your station for a UV gel service, where should the client's arm cushion be placed? |
In the middle of the manicure table |
|
What should never be stored in the drawer of the manicure table? |
Used materials |
|
During the post service procedure, what do you do next after recommending retail products to the client? |
Escort the client to the front desk |
|
when cleaning the clients nails and removing the existing polish before a UV gel application, it is recommended that you start with the _____. |
Little finger on the right hand |
|
when performing a one color UV gel application, it is recommended that you leave a _____ gap around the cuticle and sidewall area of the fingernail. |
3/16 of an inch |
|
when applying the UV gel onto the fingernail during a one color UV gel application, it is recommended that you _____ the gel onto the nail. |
Gently brush |
|
How long should the clients nails cure under the UV light after a one color UV gel application? |
The length of time determined by the manufacturer |
|
What can be use to remove the inhibition layer after the second layer of UV gel is added? |
The manufacturer's cleanser, acetone, or alcohol |
|
after the gloss gel has cured and the inhibition layer has been removed, the next step in the one color UV gel application procedure is to _____. |
Apply nail oil |
|
when performing a two color UV gel application, what is the next step after pushing back the eponychium and removing cuticle from the nail plate? |
Clean and dehydrate the nail |
|
When using tips with UV gels, if the curve of the tip does not match the curve of the fingernail the tip can _____. |
Cracked lengthwise down the center |
|
when performing a two color UV gel application, you create what is known as the _____ when you apply a coat of white gel over the tip and along the side walls of the fingernail. |
Smile line |
|
In general, the more opaque gels have _____ viscosities. |
Thinner |
|
Less opaque pigmented gels are applied _____ the first coat of building gel. |
Before |
|
When applying UV gel over forms, clear plastic forms can be used to allow UV light to _____ from the underside. |
Penetrate |
|
It is important to avoid excessive filing of gel enhancements because it can result in _____ of the enhancement. |
Cracking that begins at the side walls |
|
when applying UV gel over a monomer and polymer enhancement, the use of buffing or cuticle oil when shaping the monomer and polymer enhancement before the job application is _____. |
Not recommended |