• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/21

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

21 Cards in this Set

  • Front
  • Back

How many parts is lineman’s body belt made of?

Four

What is the most critical measurement of a body belt?

Dee measurement

Lineman’s safety straps must be inspected before each use and every how many months when they are stored for a period of time?

6months

What are used for ascending, descending and maintaining work positions on the pole?

Climbers

What is a section of a rope turned back in itself called?

Bight

What is used to tie together two ropes of the same diameter?

Square knot

What is commonly used to tie objects, such as crossarms and hand tools into a hand line in order to raise or lower them on a pole?

Clover hitch

What is used to guide heavy objects, such as transformers, away from the pole and for lifting or moving heavy timbers?

Timber hitch

What is the best known method for forming a bight that will not slip under tension and can be easily untied?

Bowline

What will allow you to move up or down a pole for very short distances in order to reach your work?

Hitchhiking

What are used to attach secondary ropes to main ropes at points other that at the ropes ends or to attach the free end of a rope to its stranding part or other object?

Hitches

What’s a block and tackle?

Rigging tool to lift and lower equipment/material

What is the shortest permitted length of a gaff as measured from the underside?

1.25”

What’s the average lifetime of a climber(device)?

5years

A properly sharpened and shaped gaff will cut into the pole and hold, within a distance of no more than how many inches?

2”

What is the hard spot or spits on a pole where a stern or a branch once existed?

Know

When ascending a pole, take short, comfortable steps that are approximately how many inches high?

8-10”

Personnel must stand at least how many feet away from any pole that has an individual working aloft?

10’

What are used when a single are is not strong enough to support the conductor weight or there is an angle change in the overhead line?

Double cross arms

What is the simplest rigging tool used in the field?

Hand line

Hand line as a general rule should be made of rope at least what size in diameter?

1/2”