Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
24 Cards in this Set
- Front
- Back
OSI Layer responsible for reliable end to end logical connection.
|
transport
|
|
OSI layer that provides reliable transmission across a physical medium
|
datalink layer
|
|
mac address lenght in bytes and which is serial number and which is company id number.
|
6 bytes.
vendor-serial |
|
RARP
|
MAC is known - IP is not. Diskless PC
|
|
switching -cut through
|
stores only 6byte dest addy in buffer. fast
|
|
switching-fragmenty free
|
modified cut-thro.
waits for collision window, dest addy in buffer 6byte, better error checking no latency. FASTEST. |
|
used by switchs to prevent loops
|
STP (spanning tree proto) 802.1d, uses bridge PDU's to determine net topology
|
|
VLAN benefits
|
less admin cost, better control of broadcasts, tighten net security and distribute load.
|
|
formula to get max number of subnets and hosts of an ip addy.
|
class B
has 16 mask bits standard. count all additional mask bits and apply. 2^n-2=max number of subnets. Max host-count all host bits. 2^n-2=max # of hosts. |
|
Grouping a large number of Class C networks into a single group, and putting a
single entry for that group in an Internet router, to reduce the overall size of the IP routing table |
CIDR
|
|
Ctrl+A
Ctrl+E Ctrl+F Ctrl+B |
begin of line
end of line 1 charcter forward 1 charcchter back |
|
Esc+B
Esc+F Ctrl+N Ctrl+P |
1 word back
1 word forward recent command recall previous commd. (up arrow) |
|
cdp default updates and holdtime
|
update 60sec
holdtime 180 sec |
|
show run
shows containts of |
RAM
|
|
command to resume a suspended telnet session
|
resume and session id
|
|
Ctrl+shift+6 X
|
return to original router w/o closing telnet
|
|
#no ip domain-lookup
|
disable routers DNS lookup.
|
|
command to set a default statif route
|
#ip default-network [ip addy]
|
|
RIP timers
update invalid flush holddown |
30
180 240 180 |
|
RIP
frame rely doesnt broadcast. So what command is used to specicfy were to send ads to |
#neighbor [ip address]
|
|
igrp
load balancing ospf- load balancing |
def 4 max 6-unequal load balance
equal cost balancing |
|
Novell
IPX and SPX mean |
IP internetwoek packt exchange
Sequence packt xchange |
|
ACL numbering
IP std ip extd ipx std ipx extd |
ip std 1-99
ip ex 100-199 ipx std 800-899 ipx extd 900-999 |
|
IOS version allowing ACL naming
|
11.2
|