Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
40 Cards in this Set
- Front
- Back
In a LAN, what term best equates to the term VLAN - Collision domain, broadcast domain, Subnet, or trunk?
|
Broadcast Domain
|
|
If a switch has three configured VLANs, how many IP subnets are required?
|
3
|
|
When switch forwards a frame to a second switch using 802.1Q trunking, how does the first switch change or add to the Ethernet frame before forwarding?
|
It inserts a 4-byte header and does not change the MAC address
|
|
For an 802.1Q trunk between two switches, which frames do not include an 802.1Q header?
|
Frames in the native VLAN
|
|
What two commands could you use to allow trunking on a switch connected to a second switch configured with "dynamic auto"
|
'Trunking turned on' OR 'dynamic desirable'
|
|
What two commands will identify switch interfaces as being trunking interfaces?
|
'show interfaces switchport' and 'show interfaces trunk'
|
|
What is essentially identical to a given "Broadcast Domain"?
|
A LAN
|
|
Reducing a VLAN to a single access switch reduces the workload for what protocol?
|
Spanning-Tree Protocol (STP)
|
|
How does VLAN tagging modify a frame?
|
It adds a trunking header containing the VLAN identifier (VLAN ID) field to the frame
|
|
What process allows switches to send data for multiple VLANs over a single link?
|
Trunking
|
|
What two trunking protocols are used by Cisco devices?
|
IEEE 802.1Q and Inter-Switch Link (ISL)
|
|
What are the sizes of the 802.1Q VLAN header and its VLAN ID field?
|
4 bytes, and 12 bits
|
|
What is the normal VLAN range and what is the extended range?
|
1-1005, and 1006-4094
|
|
What is the only VLAN that the 802.1Q protocol does not add a header to frames on it?
|
The native VLAN(Default of VLAN 1)
|
|
What is the primary function of a native VLAN?
|
To allow connection to devices that do not understand trunking
|
|
What is a multilayer switch?
|
A switch that can use Layer 3 (Network) logic in its routing protocols
|
|
If two groups of PCs reside in separate VLANs, they must also reside in separate...
|
Subnets
|
|
What Layer of the OSI model controls the routing and forwarding of data across multiple VLANs?
|
Layer 3
|
|
What device can combine the roles of a switch and a router only used to route packets between VLANs?
|
A Layer 3 Switch
|
|
What configuration mode must the user be in the CLI to run the 'vlan (vlan ID)' command?
|
Global configuration
|
|
What is the default name for VLAN 940?
|
"VLAN0940"
|
|
What command would you enter when configuring a given interface to make it an access interface for VLAN 22?
|
'switchport access vlan 22'
|
|
What command prevents an interface from autonegotiating to a trunk interface?
|
'switchport mode access'
|
|
What command is used to display a short table of a switch's VLAN settings?
|
'show vlan brief'
|
|
What are the three modes of VLAN Trunking Protocol (VTP)?
|
Server, client, or transparent
|
|
In what VTP mode is a switch unable to configure VLANs?
|
Client
|
|
In what VTP mode can switches only configure VLANS in the standard range?
|
Server
|
|
What two VTP modes prevent the 'show running-config' command from listing VLAN details?
|
Server and client
|
|
What VTP mode is assumed to be active for all ICND1 example switches, and is analogous to turning it off?
|
Transparent
|
|
What command is used to disable VTP in global configuration?
|
'vtp mode off'
|
|
What can VTP do if its settings are modified on an active LAN?
|
Overwrite the VLAN settings of other connected switches
|
|
What protocol allows a switch to automatically negotiate either 802.1Q or ISL as its trunking protocol?
|
Dynamic Trunking Protocol (DTP)
|
|
What command can assign a protocol or allow autonegotiation for trunking protocols in interface configuration?
|
'switchport trunk encapsulation (param)'
|
|
What two modes for a given switch port govern whether trunking should be used, and what the port is currently doing?
|
Administrative Mode and Operational Mode
|
|
What 'switchport mode' parameter instructs a switch to passively receive trunk negotiation messages and negotiate if it receives one?
|
dynamic auto
|
|
What 'switchport mode' parameter instructs a switch to initiate negotiation messages to choose whether to activate trunking?
|
dynamic desirable
|
|
When establishing a trunk between two switches, what pair of trunk operational modes should you avoid combining?
|
'access' and 'trunk'
|
|
What interface configuration command disables DTP negotiation and should be used on non-trunking ports for security reasons?
|
switchport nonegotiate
|
|
What interface configuration command is used to limit the VLANs allowed on a given trunk?
|
'switchport trunk allowed vlan (param)'
|
|
What would the command 'switchport trunk allowed vlan except 100-200' do?
|
Allows all VLANs to use that trunk except VLANs 100 through 200
|