Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
44 Cards in this Set
- Front
- Back
Administrative distance of RIP
|
120
|
|
Administrative distance of EIGRP
|
90
|
|
Administrative distance of OSPF
|
110
|
|
Which routing protocol requires manual summarization
|
OSPF
|
|
two protocols automatically summarize routes
|
RIPv2 and EIGRP
|
|
RIPv2 maximum hop count
|
15
|
|
EIGRP maximum hop count
|
255 (100 default)
|
|
OSPF maximum hop count
|
no maximum
|
|
DUAL stands for
|
Diffusing Update ALgorithm
|
|
protocol provides IPv6 support
|
EIGRP and
OSPF |
|
Class of protocol is RIP?
|
distance-vector
|
|
Class of protocol is OSPF?
|
link-state protocol
|
|
Class of protocol is EIGRP?
|
hybrid protocol
|
|
Multi-cast address of RIP
|
224.0.0.9
|
|
Multi-cast address of EIGRP
|
224.0.0.10
|
|
Multi-cast address of OSPF
|
224.0.0.5
|
|
Protocol elects Designated Router
|
OSPF
|
|
Multi-casts route changes only
|
EIGRP and OSPF
|
|
Protocol that sends full routing table at specified intervals
|
RIP
|
|
name of EIGRP routing tables
|
Neighbor table and Topology table
|
|
in Passive mode, which protocol neither sends nor receives updates
|
EIGRP
|
|
in Passive mode, which protocol does not send buy does receive updates
|
RIP
|
|
RIP path metric
|
hop count
|
|
EIGRP path metric
|
bandwidth and delay
(EIGRP can also use load, reliability and MTU) |
|
OSPF path metric
|
bandwidth
|
|
All protocols can load-balance across _ equal cost links.
|
four
|
|
Which protocol can load-balance across six unequal-cost links?
|
EIGRP supports 6 unequal links.
RIPv2 and OSPF support four but need to be equal links. |
|
What does RIPv2 use to prevent routing loops?
|
Split horizon rule,
Route poisoning and Holddown timers |
|
Which protocol uses wildcards in network statements?
|
OSPF
|
|
What is significance of OSPF process ID?
|
locally significant, identifies unique instance of OSPF database
|
|
What is significance of EIGRP AS number?
|
All routers must use the same number in order to share routing information
|
|
Two protocols that use 'hellos' to maintain routing tables
|
EIGRP and
OSPF |
|
Which routing protocol communicates via Reliable Transport Protocol
|
EIGRP
|
|
IOS command to display routing table
|
show ip route
|
|
IOS command to display routing protocols, currently configured
|
show ip protocols
|
|
Routing protocol for multi-vendor support
|
RIP and
OSPF |
|
Routing protocol for Cisco only
|
EIGRP
|
|
OSPF debug commands
|
debug ip ospf packet
debug ip ospf hello debug ip ospf adj |
|
EIGRP debug commands
|
debug eigrp packet
debug ip eigrp notification |
|
RIP debug commands
|
debug ip rip
|
|
How is OSPF Router ID determined?
|
Highest IP address of all loopback interfaces, secondly highest IP of al active interfaces
|
|
How is OSPF Designated Router determined?
|
Highest priority then highest Router ID
|
|
OSPF data packet containing link-state and routing information
|
Link state Advertisement (LSA)
|
|
Single area OSPF network statements must end with what ?
|
Area 0
|