Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
|
What is the AD for a static route? For a directly connected network?
|
Static: 1
Direct: 0 |
|
|
Does RIP support routing update authenication?
|
RIPv1 does not, but RIPv2 does
|
|
|
What does RIP use to share routing information?
|
RIPv1 sends broadcasts, RIPv2 sends multicast using 224.0.0.9
|
|
|
In a spanning tree topology, what is used to delimit the root port on each non-root switch?
|
Path cost is the first value that is used to determine which port should be blocking or forwarding. If path cost does not differentiate, then bridge id and port id can be used.
|
|
|
What needs to be assigned when you configure a switch port to be a trunk?
|
switchport mode trunk
switchport trunk vlan 1 switchport trunk vlan 20, etc. |
|
|
What is the lowest priority that can be set on a switch?
|
4096
|
|
|
If you've correctly saved a configuration to NVRAM and reload the router but the router acts like it's got the default blank configuration, what's the problem?
|
The configuration register setting is incorrect
|
|
|
What kind of Frame Relay requires one subnet for all PVC connections and what kind requires one subnet for each PVC?
|
Multipoint subinterfaces use one subnet for all
Point to point uses one subnet for each |
