Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
To enter commands and configure a Cisco router a user must
|
log into the router to access the user interface
|
|
The two commands that can be used to set a password for privileged EXEC mode are
|
enable password and enable secret
|
|
If both commands are used, the .
|
enable secret command takes precedence
|
|
The global configuration mode can only be accessed from the
|
privileged EXEC mode
|
|
specific modes that can also be accessed from the global configuration mode:
|
Interface, Subinterface, Line, Router, Route-map
|
|
To return to the user EXEC mode from the privileged EXEC mode
|
the disable command may be entered
|
|
Type exit or end or press Ctrl-Z to return to
|
privileged EXEC mode from global configuration
|
|
Ctrl-Z may also be used to return directly to the privileged EXEC mode from configuration
|
any sub-mode of global
|