• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/33

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

33 Cards in this Set

  • Front
  • Back
What are the two types of Hydraulic pumps on the 757?
Electric and Engine driven
On the 757 hydraulic pump switch what are the lights in the switch?
upper is the ON
lower is the PRESS
On the 757 what is the light below the hyd pump switch?
OVHT
The HYD systems are powered by which pumps on the 757?
L system: L eng pump and L electric pump
C system: 2 center electric pumps
R system: R eng pump and R electric pump
On the 757 what is the PTU?
A hyd motor pump that operates from pressure from the R hyd sys and pumps fluid from a standpipe reservoir in the L hyd sys to operate the critical components in the L hyd system.
The PTU will activate for what reasons on the 757?
low left hyd sys pressure or
left eng failure
The PTU will provide pressure to operate what components on the 757?
flaps
slats
landing gear
main cargo door
steering
On the 757 during PTU operation what happens to the left hyd sys pressure light?
It might remain on or go out.
When is the PTU inhibited on the 757?
When the right engine is INOP.
On the 757 the RAT pressurizes which system?
Center hyd sys
On the 757 when does the RAT deploy?
at the loss of both engines
On the 757 below what airspeed does the RAT become ineffective?
130 knots
On the 757 if the RAT is deployed what do the hyd panel lights do?
They go out.
On the 757 RAT, how is fluid provided for it's operation?
Fluid below a standpipe in the center reservoir is used for the RAT
HYD Reservoir lights on the hyd panel display what and when?
RSVR light indicates low quantity or air in sys
SYS PRESS light indicates low pressure
Reservoir Quantity is found where and what cautions can you find there?
Status page gives % full
RF means low level
OF means over filled
The L and R HYD pumps operate when?
They are full time.
Components serviced by the L HYD sys on the 757 are?
L TR
ALT brakes
L Autopilot
Spoilers
R Aileron
Rudder Ration
Yaw dampers
Flaps & Slats
Landing Gear
N Wheel Steering
Main Cargo Door which also
has a hand pump
On the 757 the Components lost if fluid goes below the standpipe lever on hyd sys 1are:
L TR
ALT brakes
L A/P servos
Spoilers
Rudder ratio
On the757 Center hyd sys powers these components:
Center A/P servos
Spoilers
R L ailerons
Elevators
Rudder
R yaw damper
Elevator feel
Stab trim
On the 757 the center sys has 2 elec pumps which operate full time except?
Center pump 2 is inhibited if
Only one generator
Only ext power is available
On the 757 the RAT does what?
Provides backup pressure for the center sys.
On the 757 what provides backup fluid for the RAT?
A stand pipe in the center hyd sys.
On the 757 if the center sys is lost you lose these components:
Center A/P servos
Some spoilers
R yaw damper
On the 757 the right hyd sys services the following components:
R T/R
Normal brakes
R A/P servos
Spoilers
L ailerons
Elevators
Rudder
Elevator feel
Stab trim
PTU
On the 757 Fluid below the standpipe disables the following systems:
Normal brakes
R T/R
Some spoilers
R A/P servos
PTU
On the 757 the right standpipe does what?
Right standpipe reserves fluid for
Reserve brakes
On the 757 pushing the Reserve Break Switch accomplishes the following:
Opens valve to reservoir below standpipe
Closes valve to other components
Activates electric pump to
pressurize the brakes
On the 757 The Park brake light guarantees adequate brake pressure: TRUE or FALSE
FALSE
ON the 757 The Park Brake Light indicates what two items?
The Park Brake Light indicates

the brake is set and the valve is closed.
Starting which pump will pressurize the brakes.
The RIGHT HYD pump
When only one generator is operating
which one of the center hydraulic pumps is inhibited?
Center Electric pump 2
When turning the HYD pumps on why do we start the Center HYD pump 2 first?
To ensure it works because the #1 pump
will inhibit it when you turn it on.