• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/12

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

12 Cards in this Set

  • Front
  • Back

Treatment for Stable Unsymptomatic Bradycardia

* Supportive care
* 12 lead to assess for ischemia or other abnormalities
* Consider underlying causes

Signs and symptoms of Stable, Symptomatic Bradycardia

dizziness, difficulty breathing, chest pain

Treatment for Stable Symptomatic Bradycardia

* Fluid bolus
* 12 lead electrocardiogram (ECG) to assess for ischemia or other abnormalities
* Atropine 0.5 mg; repeat every 3-5 minutes to a maximum combined dose of 3 mg

Treatment for Unstable Bradycardia

* Transcutaneous pacing
* Atropine 0.5 mg IV; (may give one dose while setting up pacing, but do not delay pacing )
* Midazolam 1-2 mg IV as required for sedation as patient condition permits; may repeat one time after 5 mins as needed

Names and dosesof the Level 2 medications that may be administered in this protocol

* Dopamine infusion 5 - 20 mcg/kg/min
* Epinephrine infusion 2 - 10 mcg/min (Reference: CT7 Epinephrine Drip Chart)
* Additional sedation

When is Atropine contraindicated?

* in the presence of acute coronary ischemia or an acute myocardial infarction (AMI).

What is the dose of Midazolam in patients > 60 years old or with borderline blood pressure

Half dose

Should 12 Lead EKG be done in Bradycardic patients?

* 12 lead electrocardiogram (ECG) should be completed early to rule out an acute myocardial infarction (AMI), but it should not delay treatment if the patient is unstable
What is the initial rate for Pacing?

60 BPM
What is the initial milliamps for pacing?
60 milliamps
How many milliamps should the pacer be increased until mechanical capture occurs?


10 milliamps



Name two ways to verify mechanical capture

Palpable pulse, by comparing the pulse rate measured by the pulse oximeter to the set pacing rate.