Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
43 Cards in this Set
- Front
- Back
Short metal "T" beam used in suspended ceiling systems to bridge the spaces between the main beams |
cross tee |
|
Roofing tile which has the shape of an "S" laid on its side |
pantile |
|
Clay roofing tile approximately semi cylindrical in shape laid in courses with units having their convex side alternately up and down |
mission tiles |
|
Groove cut into a board or panel intended to receive the edge of a connecting board |
dado |
|
Part of the building foundation which forms the permanent retaining wall of the structure below grade |
foundation wall |
|
Part of a foundation system which supports the exterior walls of a superstructure and bears directly on the column footing |
grade beam |
|
Black, tar like waterproofing material applied to the exterior of a foundation wall |
dampproofing |
|
System of framing a building in which the studs are continuous to roof supporting second floor joints |
balloon framing |
|
System of framing a building in which the studs are continuous to roof supporting second floor joints |
balloon framing |
|
System of framing a building on which floor joists of each storey rest on the top plates of the storey below and the bearing walls and partitions rest on the subfloor of each storey |
western framing |
|
An exterior security lock installed on exterior entry doors that can be activated only with a key or thumb-turn |
deadbolt |
|
Rough plaster finish obtained by flinging plaster on a wall with a hand operated machine |
tyrolean finish |
|
Principal member of the truss which extends from one end to the other primarily to resist bending |
chord |
|
Composition of two or more metals fused together usually to obtain a desired property |
alloy |
|
Horizontal distance from the face of a lock or latch to the center of the knob or lock cylinder |
backset |
|
Vertical members in a railing used between a top rail and bottom rail or the stair treads |
balluster |
|
An iron alloy usually including carbon and silicon which has high compressive strength but low tensile strength |
cast iron |
|
Ferrous metal that offers great resistance to abrassion and finds important use in the cutting edges of heavy digging tools |
Ferrous metal that offers great resistance to abrassion and finds important use in the cutting edges of heavy digging tools |
|
Ferrous metal that offers great resistance to abrassion and finds important use in the cutting edges of heavy digging tools |
wrought iron |
|
Commercially pure iron of fibrous nature, valued for its corrosion resistance and ductility |
wrought iron |
|
Ferrous metal that offers great resistance to abrassion and finds important use in the cutting edges of heavy digging tools |
nickel steel |
|
Commercially pure iron of fibrous nature, valued for its corrosion resistance and ductility |
wrought iron |
|
The wall of Intramuros |
fortification |
|
Beam that projects beyond one or both its support |
cantiliver beam |
|
Beam that projects beyond one or both its support |
cantiliver beam |
|
Beam that projects beyond one or both its support |
cantiliver beam |
|
Wall (bearing or non-bearing) designed to resist lateral forces parallel to the wall |
shear wall |
|
Modern method of installing wood parquet flooring on wooden boards sub-flooring |
gluing / pasting |
|
Standard height of window sills for office rooms in upper floors |
0.90m |
|
Dimension of commercial acoustic boards for aluminum T-runners used for dropped-ceiling in offices |
24"x48"x1/2" |
|
Structural method used for longer span/ interval of columns |
Building paper sheathing and space filled |
|
Corrugated metal or concrete barrier walls installed around a basement window to hold back the earth |
area wells |
|
Corrugated metal or concrete barrier walls installed around a basement window to hold back the earth |
area wells |
|
Type of slab when the ratio of short span to the long span of a slab is less than 0.50 |
one way slab |
|
Corrugated metal or concrete barrier walls installed around a basement window to hold back the earth |
area wells |
|
Type of slab when the ratio of short span to the long span of a slab is less than 0.50 |
one way slab |
|
Tar paper. Installed under the roof shingles |
felt |
|
Longitudinal beams which rest on the top chord and preferably at the joints of the truss |
purlins |
|
The section of which the moment changes from positive to negative |
inflection point |
|
Narrow strip of wood applied to cover a joint along the edges of two parallel boards in the same plane |
batten |
|
Narrow strip of wood applied to cover a joint along the edges of two parallel boards in the same plane |
batten |
|
A wood or plywood piece used to fasten the ends of two members together at a |
fish plate / gusset plate |
|
The boxing in of covering a joist, beam or girder to give the appearance of a larger beam |
beam blocking |