• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/20

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

20 Cards in this Set

  • Front
  • Back
What category of UTP cabling transmits data at 16 Mbps?
Category 4
Which of the following defines simplex communication?
Allows information to be sent.
What is the transfer rate of Category 3 cabling?
10 Mbps
What is the maximum distance of a Thinnet segment?
185 meters
What is the number of recommended users for a peer-to-peer network?
Fewer than 10
What access method is used for Ethernet?
CSMA/CD
Which of the following defines half-duplex communication?
Allows information to be both sent and received, but not at the same time.
What category of UTP allow data transfer at 1 Gbps?
Category 5e
Which topology must be terminated at both ends to prevent signal bounce?
Bus
What access method best describes CSMA/CA?
Dummy data is placed on the wire; if the dummy collides with other information, then the real information is not trans. If the dummy data does not collide, then the real data is delivered.
Which of the following best describes client-server environment?
All users on the network connect to a central server and access resources on that central server.
What is the maximum distance of UTP cable?
100 meters.
Which of the following best describes token passing?
A token runs around the network when a computer wishes to send data on the network, it fills the token with information.
Which of the following sends data in the format of pulses of light?
Fiber optic
What is the maximum length of 10Base5 cabling?
500 meters.
Which of the following best describes full duplex communication?
Allows information to be sent and received at the same time.
What Ethernet architecture transfers information at 1 Gbps over short distances and uses fiber optic cabling?
100BaseTx
What type of connector connects a Category 5e cable to a network card?
RJ-45
What is the maximum distance of fiber optic cabling?
2 Kilometers.
What type of connector connects a 10Base2 cable to a network card?
BNC.