Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
16 Cards in this Set
- Front
- Back
|
What was the original motherboard speed of the ATX board?
|
100 mhz
|
|
|
Which bus architecture supports 32-bit/4-bit cards and transfers information at 33mhz?
|
PCI
|
|
|
Which motherboard component is responsible for charging the CMOS RAM so that CMOS can maintain its data?
|
Battery
|
|
|
How many pins does a standard IDE controller have?
|
40 Pins
|
|
|
Which of the following best describes a Baby AT motherboard?
|
The only I/O port is a keyboard port on the back.
|
|
|
Which of the following devices are supported in a USB chain?
|
127
|
|
|
How many pins does a standard floppy drive controller have?
|
34
|
|
|
Which of the following video cards would be the better performing video card to purchase?
|
PCIe x 16
|
|
|
What type of cache memory was originally found on the motherboard and is not integrated into the processor?
|
L1
|
|
|
Which type of memory module supports 32-bit data chunks?
|
SIMM
|
|
|
What is the bus architecture used in laptop computers?
|
PCMCIA
|
|
|
Which of the following best describes AGP?
|
AGP slots have a direct path to the processor to help increase performance of AGP devices
|
|
|
Which PCMCIA card type is used for modems?
|
Type II
|
|
|
Which port typically used for a modem?
|
COM1
|
|
|
When connecting a floppy drive to the system, which end of the ribbon cable connects to the floppy drive?
|
The end with the twist
|
|
|
What are the labels given to the power connectors that supply power to the motherboard?
|
P1 and P2
|
