• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/49

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

49 Cards in this Set

  • Front
  • Back
When performing maintenance or upkeep
on equipment or machinery, you would find
applicable safety precautions in which of the
following publications?
all:
1. Planned maintenance system (PMS) cards
2. Operator’s manuals
3. Technical manuals
Which of the following safety actions should
you take?
all:
1. Observe all safety precautions
2. Report unsafe conditions
3. Warn others of hazards
What type of information is contained in
Material Safety Data Sheets?
Information about hazardous material
Which of the following is the major concern
of Navy personnel aboard small boats?
both:
1. Crew safety
2. Passenger safety
When handling lines or taking part in
underway replenishment, you must always
wear what article of safety equipment?
Inherently buoyant life jacket
Which of the following hazards is/are
associated with jet aircraft on flight decks?
all:
1. Being blown overboard
2. Being burned by jet exhaust
3. Being sucked into jet intakes
Besides fuel and ammunition handling
spaces, smoking is prohibited in which
of the following areas?
both:
1. Flight deck
2. Hangar deck
Lifelines are used for which of the following
purposes?
To prevent personnel from being washed
overboard
You should not paint scaffolding for which
of the following reasons?
Paint makes scaffolds slick
Which of the following safety items should
you use when handling cargo?
all:
1. Safety shoes
2. Hard hat
3. Gloves
When using a hand truck to move loads on a
ramp, you should move the hand truck in what
way?
Pull the load up, push the load down
When working aloft, you can receive a shock
from which of the following pieces of gear?
all:
1. Ladders
2. Guy wires
3. Metal fittings
When working over the side, you must
wear which of the following pieces of
safety equipment?
Inherently buoyant life jacket
Accidents involving steam usually occur
in what working spaces?
Engine rooms and firerooms
A person overcome by carbon monoxide
has which of the following symptoms?
all:
1. Sudden feeling of weakness
2. Headache
3. Drowsiness
If you are in a closed compartment and think
you’re being affected by carbon monoxide,
you should take which of the following
actions?
both:
1. Call for help
2. Get to fresh air
What person is authorized to certify that
a closed space is safe to enter?
Gas free engineer
When using an internal combustion engine in
a closed space for de-watering or fire fighting,
you should take which of the following actions
to ensure personal safety?
Make sure the exhaust is carried to
the open atmosphere
During fueling operations, the word is passed
“the use of open flame devices is prohibited.”
Which of the following devices is/are
considered an open flame?
all:
1. Matches
2. Lighted candles
3. Cigarette lighters
Projectile-type ammunition that is 3 inches or
greater in diameter can be identified by what
method?
Color code
You should NEVER take which of the
following items into a magazine?
both:
1. Naked lights
2. Matches
Aboard ship, where are pyrotechnic materials
usually stored?
In stowage spaces on topside decks
What person must approve the use of personal
electrical equipment before you can use it
aboard ship?
The engineer officer
Compartments used to store compressed gas
cylinders should not be allowed to rise above
what maximum temperature?
130ºF
On noncargo ships, in what position should
compressed gas cylinders be stored?
Vertically, valve up
Compartments that contain compressed
gases are ventilated for what length of
time if ventilation has been secured?
5 minutes
Oxygen and chlorine cylinders may be
stored in close proximity (near) to fuel
or gas cylinders (t/f).
false
Only trained and medically qualified
personnel are authorized to remove asbestos (t/f).
true
A tool is classified as power-driven if it has
which of the following power sources?
all:
1. Pneumatic
2. Hydraulic
3. Electrical
Personnel assigned to a fire watch during
a welding operation must remain at their
location for what minimum length of time
after the job is completed?
30 minutes
When operating rotating machinery, you
should never wear which of the following
items?
all:
1. Jewelry
2. Neckties
3. Loose-fitting clothes
Compressed air can be used to clean
disassembled machinery parts provided the
pressure doesn’t exceed how many pounds
per square inch (psi)?
30 psi
Sewage wastes contain bacteria and viruses.
They can enter your body through which of
the following means?
all:
1. Your nose
2. Your mouth
3. Open sores
You should not use liquid soaps or scented
disinfectants to clean up spilled sewage for
what reason?
They may temporarily disguise inadequate
clean-up procedures
You shouldn’t smoke around sewage-handling
equipment for what reason?
Gases found around equipment and given
off by sewage are explosive
Continuous exposure to high-level noises
could cause which of the following kinds
of hearing loss?
both:
1. Temporary
2. Permanent
When working in machinery rooms and
repair shops, you may be required to wear
double-hearing protection (t/f).
true
When driving or riding in a Navy vehicle,
you are required to wear seat belts (t/f).
true
Which of the following precautions should
you follow when lifting heavy objects?
all:
1. Keep the load close to the center
of your body
2. Pull the load toward you; then lift
gradually
3. If too heavy to lift alone, get help
Heat stress is caused by which of the
following factors?
all:
1. Workload
2. Humidity
3. Air temperature
Prolonged exposure to heat stress conditions
causes which of the following medical
emergencies?
both:
1. Heat stroke
2. Heat exhaustion
What is the major health risk to personnel
who are exposed to severe cold weather?
Hypothermia
Which of the following documents
standardizes tag-out procedures aboard ship?
OPNAVINST 3120.32
Under the tag-out procedures, what person
has the authority to place a system off line
for repairs or maintenance?
Authorizing officer
How many different tags are authorized for
use in identifying defective instruments or
pieces of equipment?
4
What color is used to identify a danger tag?
red
What color identifies a caution tag?
yellow
What means are used to control an entire
tag-out procedure?
Tag-out logs
Which of the following publications contain
information on Navy safety?
OPNAVINST 5100.19