Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
15 Cards in this Set
- Front
- Back
* Small evenly distributed erregularities in the surface layer, which are characteristic of different machining and finishing operations peformed on the workpiece.
|
Surface Finish
|
|
* In simple terms, define surface finish.
|
The deviation from the ideal flat surface.
|
|
* How are deviations in surface finish expressed?
|
1. Roughness
2. Waviness 3. Lay 4. Flaws |
|
* Define "Roughness" (Y)
|
The size of finely distributed surface pattern deviations for the smooth surface. Height from the surface.
|
|
* Define "Lay" (S)
|
The dominant direction of the surface pattern. Milling, turninng, or grinding.
|
|
What is the symbol for surface finish?
|
|
|
* What changes on the surface finish symbol if "roughness" is the only parameter specified?
|
The horizontal line can be ommitted.
|
|
* What does the triangle located in the "V" of the checkmark indicate?
|
A machining allowance requirement.
|
|
* What is the symbol for "Roughness height average or maximum-minimum roughness height average"?
|
A
|
|
* What is the symbol for "Lay"?
|
E
|
|
* What is the symbol for "Machining Allowance"?
|
B
|
|
* What is the symbol for "Roughness sampling length"?
|
D
|
|
* What is the symbol for "Wavines and waviness spacing"?
|
C
|
|
* Study the Surface Finish Symbol in Chapter 8
|
See page 14
|
|
* What devices can be used to measure surface finish?
|
1. Surface finish gage
2. Profilometer 3. Visual comparitor |