Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
35 Cards in this Set
- Front
- Back
|
the intercom system serves as an interface between the pilot and |
onboard comms and nav equipment |
|
|
where is the intercom control panel located |
left console |
|
|
this icp switch allows for hands free communication |
hot mic |
|
|
when heard this audio is twice the volume of other audio |
pull up |
|
|
the intercom system consists of what components |
icp, headset/ mic assembly, ground mx receptacle |
|
|
the an/arc-210 radio system provides_____to____ and ____to____ two way voice comm |
air to air, air to ground |
|
|
where are the radio 1 r/t and mount assembly located |
f40 |
|
|
what is the frequency range of the arc 210 vhf/uhf radio |
30.000 mhz to 399.975 mhz |
|
|
when is the fast operation checkout used |
when a removed lru is reinstalled |
|
|
which rsc frequency mode switch position will select operation in hq hq 2 or sincgars mode |
eccm |
|
|
ky58 is used in conjuction with these radios |
arc 164(uhf) and arc 186(vhf/fm) |
|
|
provides altitude info to iff system |
cadc |
|
|
the coder/decoder and re-978/arc relay assembly are located in |
f99 |
|
|
this rcu switch position allows both radios to operate with unencrypted audio |
plain |
|
|
this ahcp switch applies power to the eplrs r/t |
jtrs |
|
|
the main interface of the sadl/eplrs radio |
mfcd |
|
|
this component contains the software allowing the pilot to control tdl/eplrs/sadly functionality |
cicu |
|
|
what is the function of the alarm indicator on the GPS-eplrs fill panel |
keys successfully loaded, or zeroized into eplrs radio |
|
|
what system status page stat indication means the idm is currently reconfiguring to a new network |
init |
|
|
how is an alarm tone silenced |
pressing and releasing the mic switch |
|
|
this mode provides altitude to the nearest 100ft |
mode c |
|
|
controls hud and cdu data entry |
ufc |
|
|
the iff/sif control panel provides code selection for which modes |
mode 1 and 3/a |
|
|
provides the interface to control iff when in primary control mode |
mfcd |
|
|
name the two guard frequencies |
121.500 mhz and 243.000 mhz |
|
|
where is the idm located |
f105 |
|
|
idm converts vmf digital data into____ data to be xmt on the tdn |
rf |
|
|
this mfcd page provides a plane view representation of the current tactical situation |
tad page |
|
|
the idm interfaces with the arc 210 radio on what channel |
channel 1 |
|
|
what displays the idm rt selection on the hud |
iffcc |
|
|
where is the Lars v12 rt located |
f10 |
|
|
Lars audio is controlled in conjunction with what other audio |
iff |
|
|
provides control and status of the Lars rt and manages csar missions |
cicu |
|
|
Lars voice comms channels are spaced in ____ increments |
25 khz |
|
|
what is the Lars operational frequency range |
225.000 to 399.975 mhz |
