Basic Military Requirements Navedtra 14325 Chapter 19

Front 1

When performing maintenance or upkeep on equipment or machinery, you would find applicable safety precautions in what publications?

Back 1

PMS cards, Operators manuals, and technical manuals

Front 2

What safety actions should you take?

Back 2

observe all safety precautions, report unsafe conditions, and warn others of hazards

Front 3

What type of information is contained in MSDS?

Back 3

information about hazardous material

Front 4

What is the major concern of Navy personnel aboard small boats?

Back 4

crew safety and passenger safety

Front 5

When handling lines or taking part in underway replenishment, you must always wear what article of safety equipment?

Back 5

inherently buoyant life jacket

Front 6

What hazards are associated with jet aircraft on flight decks?

Back 6

being blown overboard, being burned by jet exhaust, being sucked into jet intakes

Front 7

Besides fuel and ammunition handling spaces, smoking is prohibited in what areas?

Back 7

flight deck and hangar deck

Front 8

Lifelines are used for what purposes?

Back 8

to prevent personnel from being washed overboard

Front 9

You should not paint scaffolding for what reason?

Back 9

paint conceals defects

Front 10

What safety items should you use when handling cargo?

Back 10

safety shoes, hard hat, and gloves

Front 11

When using a hand truck to move loads on a ramp, you should move the hand truck in what way?

Back 11

pull the load up, push the load down

Front 12

When working aloft, you can receive a shock from what piece of gear?

Back 12

ladders, guy wires, and metal fittings

Front 13

When working over the side, you must wear what piece of safety equipment?

Back 13

inherently buoyant life jacket

Front 14

Accidents involving steam usually occur in what working spaces?

Back 14

engine rooms and firerooms

Front 15

A person overcome by carbon monoxide has what symptoms?

Back 15

sudden feeling of weakness, headache, and drowsiness

Front 16

If you are in a closed compartment and think you're being affected by carbon monoxide, you should take what actions?

Back 16

call for help and get to fresh air

Front 17

What person is authorized to certify that a closed space is safe to enter?

Back 17

Gas free engineer

Front 18

When using an internal combustion engine in a closed space for de-watering or fire fighting, you should take what action to ensure personal safety?

Back 18

Make sure the exhaust is carried to the open atmosphere

Front 19

During fueling operations, the word is passed "the use of open flame devices is prohibited." What devices are considered an open flame?

Back 19

matches, lighted candles, cigarette lighters

Front 20

Projectile-type ammunition that is 3 inches or greater in diameter can be identified by what method?

Back 20

Color code

Front 21

You should NEVER take what items into a magazine?

Back 21

naked lights or matches

Front 22

Aboard ship, where are pyrotechnic materials usually stored?

Back 22

in stowage spaces on topside decks

Front 23

What person must approve the use of personal electrical equipment before you can useit aboard ship?

Back 23

the engineer officer

Front 24

Compartments used to store compressed gas cylinders should not be allowed to rise above what maximum temperature?

Back 24

130 degrees F

Front 25

On noncargo ships, in what position should compressed gas cylinders be stored?

Back 25

vertically, valve up

Front 26

Compartments that contain compressed gases are ventilated for what length of time if ventilation has been secure?

Back 26

15 minutes

Front 27

True or False. Oxygen and chlorine cylinders may be stored in close proximity (near) to fuel or gas cylinders.

Back 27

False

Front 28

True or False. Only trained and medically qualified personnel are authorized to remove asbestos.

Back 28

True

Front 29

A tool is classified as power-driven if it has what power sources?

Back 29

pneumatic, hydraulic, or electrical

Front 30

Personnel assigned to a fire watch during a welding operation must remain at their location for what minimum length of time after the job is completed?

Back 30

30 minutes

Front 31

When operating rotating machinery, you should never wear what items?

Back 31

jewelry, neckties, or loose-fitting clothes

Front 32

Compressed air can be used to clean disassembled machinery parts provided the pressure doesn't exceed how many pounds per square inch (psi)

Back 32

30 psi

Front 33

Sewage wastes contain bacteria and viruses. They can enter your body through what means?

Back 33

nose, mouth, or open sores

Front 34

You should not use liquid soaps or scented disinfectants to clean up spilled sewage for what reason?

Back 34

they may temporarily disguise inadequate clean-up procedures

Front 35

You shouldn't smoke around sewage-handling equipment for what reason?

Back 35

gases found around equipment and given off by sewage are explosive

Front 36

Continuous exposure to high-level noises could cause what kinds of hearing loss?

Back 36

temporary or permanent

Front 37

True or False. When working in machinery rooms and repair shops, you may be required to wear double-hearing protection.

Back 37

True

Front 38

True or False. When driving or riding in a Navy vehicle, you are required to wear seat belts.

Back 38

True

Front 39

What precautions should you follow when lifting heavy objects?

Back 39

keep the load close to the center of your body, pull the load toward you;then lift it gradually, if too heavy to lift alone, get help

Front 40

Heat stress is caused by what factors?

Back 40

workload, humidity, and air temperature

Front 41

Prolonged exposure to heat stress conditions causes what medical emergencies?

Back 41

heat stroke or heat exhaustion

Front 42

What is the major health risk to personnel who are exposed to sever cold weather?

Back 42

hypothermia

Front 43

What document standardized tag-out procedures aboard ship?

Back 43

OPNAVINST 3120.32

Front 44

Under the tag-out procedures, what person has the authority to place a system off line for repairs or maintenance?

Back 44

authorizing officer

Front 45

How many different tags are authorized for use in identifying defective instruments or pieces of equipment?

Back 45

four

Front 46

What color is used to identify a danger tag?

Back 46

red

Front 47

What color identifies a caution tag?

Back 47

yellow

Front 48

What means are used to control an entire tag-out procedure?

Back 48

tag-out logs

Front 49

What publication contain information on Navy safety

Back 49

OPNAVINST 5100.19